LIGHTDIMS Original Strength - Light Dimming Shapes Dims 50-80%, in Minimal Packaging (1 Sheet).

Great value and quality! Basically a lifetime supply for $5! They have every size imageinable, and they are pretty simple to put on. They function great and block light, plus you just stack them and they block even more. I put 3 on both sides of my MacBook's charger, and its perfect, still clearly visible, without being bright at all

The product arrived intact and works extremely well. If you have an LED light or a really bright light that comes with your gear, then this is a well rounded product that works for dimming any light.

These stickers do their job pretty well. They have made my alarm clock more bearable and practically put an end to the constellation of LED "stars" that lit up my bedroom at night. In one case, an LED was so bright that I had to double up, but in most cases one sticker effectively dimmed the lights. If no other options are available to you (namely, adjusting/disabling the light through the electronic device itself), these will do the trick. These stickers come in a generous array of sizes, but if you're engaging in an all-out war against electronics' lights, you're bound to run into a tricky shape eventually. The largest on this sheet is roughly 2.25" x 1", and there are only two of them; if you have large surface areas to cover, there are larger options available elsewhere. So far, though, the smallest circle has worked out well (usually being slightly bigger than the light it covers). If aesthetics are important to you, please note: these are black, glossy stickers. They're not a big deal if you're placing them on a glossy black surface, which happened to be where most of mine went. If you're just covering up a small indicator light, it may not be a big deal. But if you have a matte surface, and/or any surface cover other than black, these stickers will stick out like a sore thumb. In my experience, placing a sticker on, say, a red surface doesn't result in a darker red patch on the red surface: the sticker is transparent, but still very dark and looks black on just about any surface. This product is also available in white, so you have one other option, but if you're dealing with surfaces other than black or white you're going to compromise their looks.

I recently purchased the LightDims Original Strength Light Dimming Covers, and I can confidently say these little products are a game changer for anyone looking to reduce intrusive light in their living space. Whether it's a bright LED on a piece of electronics or that pesky light from a charging device, these covers do an outstanding job of blocking out unwanted illumination. Design & Functionality: The LightDims come in a simple, unobtrusive design that adheres easily to any smooth surface. I was especially impressed by the adhesive quality; they stick firmly but can be removed without leaving behind any residue. The covers are thin enough that they don’t create a bulge or look unsightly, and they blend seamlessly with most devices. Effectiveness: As for their effectiveness, these dimming covers do exactly what they promise. I placed them on surge protector strips, my dehumidifiers, Wi-Fi cams, and more, and the difference was immediate. The bright blue light that previously disrupted my sleep, is now a soft, manageable glow. What I love is that they don’t completely block the light but rather soften it, ensuring that the devices still indicate their status without being overwhelming. Value for Money: Considering the affordable price for a pack of 40, the LightDims provide excellent value. I’ve used several already and have plenty left over for future projects or additional appliances. It’s a small investment for a big impact on the quality of my sleep and overall comfort in my living environment. Final Thoughts: Overall, I highly recommend LightDims Original Strength Light Dimming Covers for anyone tired of bright, distracting lights at night. They are effective, easy to use, and affordable – what more could you ask for? If you’re considering them, don’t hesitate; they are a simple solution to obtrusive LEDs in the modern home!

I got a Lenovo gaming laptop, and the power button light under the screen is super bright, making it obnoxious when trying to play games in the dark. You can disable the light from BIOS, but because it also acts as an indicator for performance modes (it changes colors depending on the mode I set it to), I didn't want to disable it. Maybe the Lenovo app on Windows bundles a dimmer setting for it, idk, but because I have to be all complicated and run Linux, I don't have that option either. I'd been meaning to get these stickers for several practical uses like this, but I was surprised to find one of the sticker sizes, specifically the second-largest circle size, was the PERFECT size to cover the light. If you apply it precisely enough, you can't even visually tell there's a sticker on the button. The dimming from the sticker takes that button from brighter than my screen to just slightly dimmer than my keys. So if you have a Lenovo Legion laptop with this button and the same problem with it, here's a recommendation. It remains to be seen whether the sticker can hold up to being touched a lot, but since the intended application of this product probably doesn't account for that, I don't feel it's fair to rate it on that factor. Besides, if one rubs off, I have several more to go through. These are pretty simple to apply. They're VERY thin, I had to curl the plastic sheet a bit to get them up, but they seem substantial. I was able to lift the sticker off my button and make a second attempt at placing it with no issues, so they won't lose all their stickiness after the first application. No wrinkling, no residue noticed either. Nice product, guys. Thanks!

So LightDims have their ups and their downs. Of all the products of this nature on the market they are still the best in general quality and effectiveness, but there is a huge room for improvement. To begin with, the adhesive they use is definitely questionable. You basically have one try. If you have to reposition it, chances are it's not going to stick the second time. I understand that they don't want it to leave residue if removed (and want it to be removable in the first place,) but they can still do quite a lot better without it being downright messy. The material is also very stiff, so, combined with the lack of a good adhesive it is very hard to stick well on surfaces that are not 100% flat (such as LEDs that stick out a bit.) Some surfaces just plain aren't flat and you really kind of have to open the device up and apply it directly to the LED if you want best results (not something I recommend to those who aren't good with their hands.) It really needs to be a lot more flexible so you can get it on surfaces that aren't flat like, sadly, all too many. I think that, given these factors, I also find the price tag to be a bit much. Especially if you want some of the other options or a multipack. When the product was new I accepted that it could be put down to supply and demand, but by now the price should have gone down and the amount offered per pack should have gone up, yet it really hasn't changed very much. I do think I have to personally recommend the "original strength" the most though. Most of the others all but completely block out all light. Generally you still want to see the LED you're covering if you at least look directly at it. The higher strengths almost completely block out all light (in most cases for me they did completely block it out.) In the worst cases, even though it feels a bit wasteful to do it, you can just stick two on something particularly painfully bright (why do they make power indicators and such that produce 50+ lumens of brightness? You don't need a power LED to be that bright!)

Works amazing!! Definitely get a couple packs of these if you intend to blackout your microwave and oven and other appliances because it only comes with one or two of the really long rectangular ones, but these work amazingly! I wish I knew about them sooner because I've really needed them in my life! I don't know what appliance makers conspired to make all their LED displays 10 billion lumens but LIGHTDIMS stands up for the little guy, us light sensitive folks and gives us some sanity back to our lives. THANK YOU!

These little stickers are amazing! I got a new phone charger and the light is super bright and bothered me when I was trying to sleep. Put one of the stickers over it and the difference is night and day. The charger no longer lights up my room and I can sleep peacefully. There are all sorts of shapes and sizes of stickers to fit whatever device you might have. They attach easily and stay put, even on surfaces that have angles and are not fully flat.

Comes in many sizes and dims the bright lights effectively. Nice!

I’ve been really happy with LightDims. They do exactly what they claim, dim bright lights from electronics that can be distracting, especially at night. I originally bought them to cover the bright display on my microwave, which used to light up the whole kitchen after dark. After applying a LightDim, the light was reduced to a much more comfortable level without completely blocking the display. What surprised me most was how useful they are for other devices. I ended up putting them on a few of my guitar pedals that had obnoxiously bright LEDs. Those lights used to be blinding in a dark room, but the LightDims toned them down perfectly while still letting me see when the pedal is on. They’re easy to apply, stick well, and can be trimmed if needed. It’s such a simple product, but it solves a problem I didn’t realize how much it bothered me until it was fixed. If bright indicator lights from electronics drive you crazy, LightDims are a simple and effective solution.

Die Aufkleber erfüllen ihren Zweck: LEDs werden etwas abgedunkelt, damit sie einem nicht mehr ganz so aufmerksamkeitsheischend in die Augen strahlen. Ist dabei nicht übertrieben, zu helle LEDs kann man danach noch gut wahrnehmen, wenn sie leuchten. Kleben gut, auch nach einigen Jahren, und auch geknickt (habe zwei Geräte, die eine LED an der Kante haben). Ich kann nicht sagen, wie gut und rückstandsfrei sie sich wieder ablösen lassen, sollte man das wollen. Hab's einfach noch nicht gemacht.

Good blackout

Have used it on displays ( coffemachine), blinking diode on ventilator and more. Dims the brightness to a level thats not annoying. Simple yet effective.