ID-COOLINGIS-55 ARGB CPU Cooler Low Profile 57mm Height CPU Air Cooler ARGB 5 Heatpipes 120x120x15mm Slim Fan, CPU Fan for Intel LGA1700/115X/1200; AMD AM4/AM5, For Desktop

Used this in a stealth build and let me just say - it's been perfect.CPU temperatures stay cool - using a i7-13700KF and it's been smooth sailing. The stock fan is great but I ended up swapping it for a Noctua fan, not needed of course. Mounting this thing was not that difficult either, it took a few tries but once I got it we were good to go. It's super small and clears my ram perfectly well. Good on ID Cooling :)

I had four CPU coolers for this build and went with this one because it is the most effective cooler in this size range, fits comfortably in my Mini-ITX sandwich case with a 3080, and keeps the [AMD Ryzen 5 7600] CPU running in the 40s-50s (C) on average, 60s occasionally, and 70s at load or while gaming. It can get loud if you don't use FanControl to keep it to a reasonable RPM, but fortunately it's so effective that with FanControl you can keep it running virtually silent.The only downsides are: the included thermal paste is the cheap stuff, so maybe use something better if you can. Also the fittings included for mounting are definitely on the cheaper side build-quality wise compared to Noctua hardware. But they work, so no qualms there, I suppose. They just aren't as sturdy as the Noctua equivalents. Still, I give it 5 stars because for the size and the price it's hard to beat this cooler.

This BARELY BARELY fit my older b365m pro4 board with an Intel i5-9400. It too me a while to figure out the right orientation for some reason.It's cold in my basement still but it's keeping it at 23C idle. And about 40C on full load. Even in the 2u chassis.Great price. Runs very quiet. Installation and mounting was very quick all in all, put backplate on, put standoffs on, put the 2 brackets on and tighten them up with nuts. Paste the cpu and screw on the cooler.Instructions are a little lacking but all needed info IS there.My NAS is rockin' now!

Great cooling for a i5 14600k with minor power limits. Fan is very loud though, might want to replace fan with something quieter like a noctua fan. Size is perfect anything bigger and it wouldn't fit my motherboard or case. I like design of fan. Very easy to install as well.

This is cooling my stock 7800X3D in a Meshlicious case. I can fit my own Noctua 120mm fan on top and have just enough space to close the side panel. I'd have to move it to get to my RAM, but that comes with the Small Form Factor territory.

This little cooler is seriously impressive. Low profile 55 mm in height gives you more room to fit a bigger gfx card. I paired it with a 9700x undervolted in 88w configuration. And a gigabyte 9070xt oc fitting inside the fractal terra. I used a noctua l12s77 before this. I’d say the performance is right on par with noctua while being whisper quiet.

Well made and easy to install. Great choice if you have limited space in your case. Kept my Ryzen 7 9700X at about 80C will gaming which is acceptable, but not ideal for processor longevity. I would say this is great for mid-range spec processors and smaller gaming builds. If your case has enough room, do yourself a favor and get the Cooler Master Hyper 212 Pro or something similar. My gaming temperature is 10-15 C cooler with the Cooler Master compared with this.

Got this to pair with my 7800X3d in a Fractal Terra case. A lot of reviews stated that this is one of the best cooler for the case. I assume that the cooling would be god tier, but in actual reality, you need to undervolt the CPU or any in that regards to get the best temps. Before under volting, I'd idle around the 70c, but after I'd hit around 60c.You can use their slim fan that came with it, but I opted for Noctua 25mm fan since I'm able to move the case.I should have gotten the RGB version since it was $5 cheaper. I suggest getting that if you plan on swapping out the fans anyways.