WORXWX020.9 18V (20V MAX) Cordless HVLP Paint Sprayer - (Tool Only - Battery & Charger Sold Separately) Black

First of all...do not use on even a slightly windy day.That aside, this is a fantastic sprayer. Excellent coverage, with a large choice of nozzle sizes / options.The battery lasts reasonably well, although you'll need at least one back-up for those larger projects.Very easy to clean as all the necessary parts disassemble as one would hope.

Excellent product. Take time to read instructions to insure the paint flows through the sprayer evenly without any blockages. Works well and easy to clean

I bought this to spray fence panels. It took a little trial and error to work out the level at which to dilute the treatment (Cuprinol Ducks Back 5 Year) but once I'd worked it out, the application worked very well.I managed to get it so the pump was not at full power while still giving an even spray. This helped with the battery life, and this will chew through them, it's just the nature of the tool. I have a few Worx tools and a good supply of batteries, so not so bad in my instance.I found I needed to give each panel three coats with the treatment I was using, but it was still a much quicker process spraying than if I'd been doing it with a brush.Cleaning up is a bit of a chore. I didn't use the supplied cleaning/hose attachment and preferred to dismantle and clean all the parts individuallly.

Really unimpressed with this. Have tonnes of Worx products and never had any major issues. Waited for a nice, calm day to paint our fences and unboxed and set this up. No matter what I did, it would only spray paint for maybe 2 seconds before just spraying air. Tried all troubleshooting steps to no avail so have had to return and start painting with a brush. Rubbish.

easy to use, sprays really well, it covered a large area easily. managed to spray paint 6 fence panels in about 30 minutes. so much quicker and easier that using a brush.

Could be a good product except the slow startup makes it very hard to control the flow of paint leading to splattering, drips and an uneven finish.

Got this Worx paint sprayer a while ago but took a while for shed to get its upgrade of new wood, so took plunge and had a go with sprayer git to say it's very user friendly, previously have never used one before but choose the correct nozzle according to handbook for shed and fence coatings no need to thin paint down, had a few practice sprays doing first coat till I got used to the various spray patterns and air and volume adjuster knobs but once I had it all sorted it's so easy and so much faster then any other painting form, I can't wait till spring time to go to town on our 16 fence panels in garden I am not even going to worry about time it will take to mask off concrete fence posts as its going to be a one day job with the worx paint sprayer, I will be getting a spare paint container so I can speed up to refilling times. Worx put so much thought into there tools this paint sprayer I can thoroughly recommend if your fed up of brush painting this is the answer.

After reading the reviews here, I was skeptical about purchasing this as the battery usage many mention seems excessive.But after coming face to face with 15 fence panels that need refresh painting after a few years of weathering, both sides had to be done & I grabbed paint brush to get started and quickly decided.... Nope! its 2023, Lets get that sprayer.I have plenty of Worx products (thus batteries) 2x 4AH 2x 2AH, I freshly charged all of them and laid them on the table prepping to burn through them all as per reviewers suggest, if I could get one side finished today I can charge them and do the rest tomorrow not a big deal.I'm using Creocote to paint the fence, its pretty thin stuff so I poured 1L into the container neat.I set the sprayer to Setting 1 (fencing) and swapped to the red head, thin spray width (as I want it to soak in/get a good dose) - used about 1L of product per 2 panels. (used 8L all in)Clipped in a 2AH battery for a giggle, just to see if I'd get one panel done before it was dead.Spraying began, bit of a learning curve to handle it and I'll admit the posts copped it on a few occasions but I'm not too worried about that, 3 panels in and I'm surprised, touching the battery pack expecting some heat its still running cold & the battery indicator says its on 2/3 power.Long story short, I sprayed 10 panels on both sides finished - on 1x 2AH Battery, ending on 1/3 with no sign of power fade.I'm not sure what people here have been doing with there's, of course I'm using bare basic #1 Fence painting setting and its thin paint but battery life was of absolutely no concern even on my old 2AH battery.I've included photos of the fencing before/after spraying.And the best thing of it all, from out of the box start to finish including clean up was about 1:30hrs, by hand that would of been a weekend job.All things considered I'm very happy with this sprayer, next I'll be painting the front fences & shed.

super pratiqueje l’utilise principalement avec de l’acrylique par flemme d’un nettoyage plus contraignant avec la glycero.Pas trop lourd meme avec le bocal plein.Bonne diffusion de la peinture

Bien pratique sans fil. Correspond tout à fait à ce que je demande pour des travaux en extérieur

Ho acquistato prima su Amazon UK e poi reso perché trovare a d un prezzo minore presso un negozio Obi. Ho testato questo secondo spruzzatore per riverniciare una staccionata in legno e direi che va benissimo. È piuttosto leggero e molto maneggevole da usare, anche con una mano soltanto. Funziona molto bene per ora! 👍

Eigentlich war ich zögerlich, da ich in der Vergangenheit schlechte Erfahrungen mit günstigen, elektrischen Farbspritzpistolen gemacht habe.Gekauft habe ich sie deshalb, um eine Alternative zum herkömmlichen Streichen der Gartenhäuser und Gartenmöbel zu haben.Mit Holzschutzlasur habe ich das nun gemacht und bin vom Ergebnis total überrascht. Die Handhabung ist einfach und die Farbverteilung auf der Fläche sehr gut. Durch die Einstellbarkeit war der Farbfilm an der Senkrechten gut deckend und genau so, dass selbst bei flüssiger Farbe keine Farbnasen oder Trieler entstehen.Auch der Farbstrahl lässt sich verändern, sodass an Wänden ergonomisch gearbeitet werden kann.Sehr gute Ergebnisse habe ich nun auch im Lackieren von Möbeln erhalten. Die Oberflächen sind sehr gut geworden, viel besser als ich angenommen hatte.Im Betrieb macht das Gerät natürlich Geräusche, die aber akzeptabel sind. Vom Gewicht her ist es schon ein Unterschied zum Streichen mit Pinsel, doch auch hier hat der Hersteller auf leichte Materialien geachtet, sodass auch längeres Arbeiten möglich ist.Die Reinigung der Farbpistole ist einfach und geht relativ schnell vonstatten.Ich verwende das Gerät gelegentlich und bin damit sehr zufrieden.

Cubre mucho trabajo, consejo limpiar muy bien la maquina 💪.