25pcs Pre-soldered Micro Litz Wired Leads White SMD Led 0603 + Muti-Resistor New

I bought this for model lighting and what a pleasant surprise. They are almost microscopic but provide a lot of light for the size. Only requires about a 1mm hole. The positive lead has insulating varnish. There are separate sets of resistors included for a wide range of voltages (3V to 16V). They are a warm color temperature (estimate 2800K-3000K). I use a 12VDC bus for lighting.Solder the resistor for your voltage, drill a small hole, add a little PVA to hold in place and done. Thank you, seller.

Great tiny LEDs that are perfect for miniature scenes.

way more than i needed or will ever have any use for again, but wired 7 of these onto an old 12v 500ma wall wart and they work great. not very bright, but then i did get the UV variant. said UV light is mostly in the high UV range, but works. dropped them inside of a resin mold, and now i have a glow in the dark castle with UV lights inside that charge the glowing very well.tried the various resistors with different voltages and they all seem to produce about the same level of brightness, while protecting the LED's, so they picked the right values, more or less.

The lights work well and produce a bright warm clean light. They used a stiff wire that interfers with mounting in tight spaces. Like HO scale headlight housings. I was able to use them in number boards more easily and they will and do work well in hidden spaces. The 0603 light head is too big with the wires attached. They are also mounted in a small drop of resin which may make them waterproof and better suited for lighting drones. They various colors are well suited for signal heads. I won't be purchasing the white lights again due to room constraints but not do to any other issue. They seem to be good qualityIn

I bought these for use in model trains. The LED body is not perfectly formed or even molded, it is like the LED itself was dipped in an epoxy resin. But, the resin can be trimmed a bit to shape it a bit. It gives a very good light and seems usable or a range of voltages.

I've used a few of these for the inside of some model ships I've built. They fit easily into just about anywhere, and it's very easy to wire them up to nearly any voltage with the included resistors! For how tiny they are, the output is very impressive! I've also bought the red and blue versions of this for some other projects I've got coming up soon. Highly recommend for anyone needing small lights for small places!

Great pin light for craft projects or your vehicle. 🚂🚃🚃🎁

Work ok.