Kingroon PLA Filament 1.75 mm is for the 3D Printer, Filament 3D Printing Materials, 1KG 3D Filament Dimensional Accuracy +/- 0.03 mm,3D Printer Filament PLA with Spool Wound Neatly, Grey pla filament

The media could not be loaded. I bought this 1kg, black color PLA filament for £9 on Amazon Prime and came within 12 hours.The quality is really good, printed multiple items with it. Had no clogging and is wound very well.It doesn't snap extremely easily but of course can under tension. Adhesion is really good but of course dependant on printer bed.The color is full jet black and not tainted like with some cheaper filaments.

This is great PLA that I can print at high speed on my bambu. It prints really nicely although does string a bit in some cases. Easily solved with a butane torch at the end of the print. Bed adhesion is good on the PEI textured bed. I am able to reliably print this at 20mm/s volumetric flow. I could probably push it a little faster but I've found this to be very reliable at that speed.Good value for money.

The prints turn out well but I have issues with stringing.Prusa Mk3s. Default PETG settings in Prusaslicer left me with stringing.Prints are very good apart from the above issue. I have dialed temperatures down to 230 bed 85. From a temperature tower, will try 225.Prints on textured plate and remove easily.Recommended as value for money.

Seems decent - not used yet but ordering and delivery was great

I bought this to build an enclosure for the "hot box" part of a surface mount solder plate (see picture - the box on the right)The plate gets up to 245C so PLA was going to struggle, hence I bought this real of ABS.Printing went well (Ankermake M5 in a sealed enclosure - 230C/90C) but the finish is definitely not as good as I've seen with PLA.But the result was perfect, technically - sides were perfectly flat and they are impervious to the temperatures in the aluminium solder plate.Recommended.

This has to be one of the worst filaments I have ever used.It arrived with a matt look too it. I measured it with calipers across a length and it never exceeded 1.68mm, it is undersized from the listing as a result and from the most standard diameter which it claimed to be, 1.75mm.I have been using the same ABS profile in prusa through a multitude of brands of ABS filament and have never had to change my settings and produced prints first time every time for the last two or so years. I questioned the quality of this as soon as I opened the bag, but when my first completed prints came out de-laminated, that confirmed it.I did my best to accommodate with a new profile using the correct 1.68mm dimensions but it still prints like junk, peels apart, over or under extrudes.It also chews up in the extruder, which based on my experience with this printer and my success, I can only put down to the material being weak. This isn't my step counts, my flow settings or anything else that have been absolutely fine with most of the other brands on Amazon, Sunlu, etc,The chewing in the extruder goes hand in hand with the matt appearance of the filament. It looks 'diluted', or like it has some filler within or something that isn't thermosplastic/ABS, which would also probably explain the de-lamination. I am very annoyed because my experience is worth a tonne, I don't just print junk like print in place toys, my printer runs a small business, and I can see junk filament when I use it.

Unfortunately the spool arrived damaged & unsuitable for the AMS system it was intended for.The vacuum bag wasn't burst and filament itself is good budget material that I'm happy with.Possibly shipping damage although no signs on the outer packaging.This is the only time I've had this happen so an unusual occurrence.

This is such a great price for 10 1kg filaments. It is worth buying for the basic colours. I have printed multiple items with these and the print is amazing every time. The colours are great. Works every time. Neatly winded in the roll. Great for any 3D printing machine.

Is ok but a bit of a grayish tone and doesn't flow the best, but it's would pretty good.

Runder roter Deckel öffnet sich dauernd

Das Filament ist sauber ohne Rotation gespult, sodass ein komplexes Modell ein farblich sehr gutes Ergebnis gebracht hat. Die Einschränkung ist jedoch, dass es sehr stark zu stringing neigt. Bei Seidenglanz Filament ist das ein Nachteil, da es aufgrund der Seidenoptik mechanisch nicht ohne Glanzverlust bearbeitbar ist.