🚀 Elevate Your Ride with INJORA's Shocks!
The INJORA 39mm Shocks are premium aluminum threaded adjustable absorbers designed for the Axial SCX24 and FMS FCX24M 1/24 RC crawler cars. Featuring an oil dampening system and three spring rates, these shocks provide customizable performance and enhanced travel for serious off-road enthusiasts.
N**N
Axial SCX24 and FMS FCX24 Upgrade
I recently upgraded my Axial SCX24 and FMS FCX24 with the INJORA 39mm aluminum threaded shocks, and I’m impressed with the performance. Here are some key points:Build Quality: The shocks are machined from aluminum, giving them a sturdy and durable feel. The threaded bodies make pre-load adjustments quick and easy. Huge upgrade over stock SCX24 shocks.Performance: These shocks use oil dampening instead of friction, which provides a smoother and more consistent rebound. The inclusion of bladder seals helps maintain this consistency. Depending on the install location/angle you may have to do some adjustments to get them to work properly. The shocks are about 3mm longer than stock but I would still consider them more of short travel shock which helps reduce body roll and stability. If you are looking for more articulation and travel go with a longer set.Customization: The package includes three different spring rates, allowing for fine-tuning to match your specific chassis setup. Plus, the variety of colors available lets you match them to your RC crawler car.Value: At $20.99, these shocks offer great value for the quality and performance they deliver.Cons: You do have to assemble the shock mount. These parts are very small and can be very frustrating if you do not have the experience. I would suggest looking up videos to make the install easier.Overall, the INJORA 39mm shocks are a fantastic upgrade for any 1/24 RC crawler enthusiast looking to enhance their vehicle’s performance and appearance.
B**O
Great shocks...if you know.
These shocks are great....but you have to do some tinkering. First they were sticking very bad. So I took them completely apart. Where the shock shaft exits the shock body it has a small plastic ring then a rubber o ring then another plastic spacer then a shouldered plastic washer that lines up with the hole in the screw on cap. What happens is the cap gets tightened and it squishes the o ring and makes them stick. Take out one of the plastic spacers and reassemble them. They work perfect! I actually lost one of the internal parts and they sent me new internals even though it was my fault. These parts are supper small. Like use a magnifying glass to work on them small. It took a few weeks to get the replacement parts but they cam through. I have no complaints. And I run them with no oil and they articulate great and just work good. And there about 3mm longer then stock so you dont have to replace a bunch of stuff to use them. Would buy again. In fact.....I did! Lol!!
A**R
No oil
Shocks are shipped dry. They need oil for sure as they tend to stick at the end of the travel. They are a pain to assemble. Installation went well on my SCX24 C10. A few different spring options. Shocks work well and have a ton of adjustment. Injora includes extras of everything and also includes spacers (needed for the C10 in standard installation). Love the way they look and perform, just be aware they need oil and are a bit fiddly to assemble.
K**D
They work awesome!
Good quality parts!
T**M
Shocks
Great shocks my go to shocks I use these on several of my 24 scale builds they look and fit great they work awesome 2 thumbs
T**9
Binding yes but can be fixed
These shocksare great but you have to do a little bit of work to get them working right without any binding, I took off the bottom cap and saw there was a couple of o-rings in them and removed 1 of them and no more binding and they work like they should, I see a lot of these other shocks recommending 20wt shock oil but for me I use 50wt in front and 40wt in rear and this combination works for my style of driving
C**7
They look nice but…
These shocks are terrible. I’ve every combination of spring and loosening the bottom cape per tech support. I even return and got another set, ALL they do is stick if I don’t touch it for 15 seconds and then pick it up the shock will not wore I can shake it and nothing happens. I have to cycle them up and down to use it at all.Very sad and disappointing I really like injora’s products and the rest of my truck (scx24 bronco) has all their parts, will have to look elsewhere for shocks though.
J**N
Shocks
Great price
Trustpilot
2 months ago
1 month ago