ROGER Rogerab For HYUNDAI Sonata (4Pcs) Patented,ARAI Tested Car Coil Spring Buffer Kit To Increase Car Height & Comfort.

My 10yr old Nissan sunny has low ground clearance and hits almost every speed breaker if going more than 5 km/hr speed. I had to go dead slow and only in first gear.Installed this product to increase GC, but only increased by 10 mm.After fitting it, now 99% of the time, I don't hit speed breakers, even if. going above 15 km/hr.This has reduced a lot of stress, anxiety and extra effort due to shifting into and out of 1st gear for every bump and carefully balancing the clutch to control speed.The suspension has become little bit hard however. That plush feeling is not there. It is not too hard however.Some people have said that it doesn't work. This product reduces the suspension travel, makes it hard and increases GC only a little. So if your car already has good ground clearance like SUV, you don't need to buy this. It might worsen your ride.

Ride quality improved after installing it. But we didn’t got the details where we can get it installed.. we’d to get it installed by local mechanic.

I recently had the pleasure of working with Roger ab for the suspension upgrade on my swift dzire, the installation process was smooth and efficient, and I noticed an immediate improvement in ride quality, the car handled providing a comfortable and stable driving experience provides a excellent value for money, and the material used are easy to clean, the suspension offers enhanced grip and stability, and the upgrades not only improve performance but also enhances the overall look of the vehicle making it a stylish choiceThanks to Roger ab suspension kit

I purchased full kit for my Tata Altroz xe plus model and i received the buffers in around 4 days.I received a mail from Roger Motors about installation location near my area with phone numbers and also they mentioned installation chages of 500rs. They provided helpline number also.I went to the mentioned auto garage to install the rogers and they installed the front buffers and it was fitting perfectly. But during rear buffer installation they said the buffers are very small and not fitting properly. So i contacted Roger Motors and they told me to either return full kit to amazon or return only the rear buffers go company where i will have to bear the courier charges.So i though of returning the full kit as why should i pay extra when its not my mistale and i initiated return yesterday. Because again if they send me wrong buffers i will have to bare the courier charges again. And this time Any how i had to pay the installtion chages. If when i receive replacement then again i have ro pay full installation chages. So buying online and if it dosent fit then minimum 1500 extra u will have to pay. So if anyone wats buffers go for offline to avoid un necessary charges.

Super fit super comfortable high ground clearance super product

Car: Hyundai Verna Fluidic SX Automatic 2014 modelIssue: Soft suspension causing issues on speed breakers and potholes.Buffer Used: Size 'B' as recommed for my car model. I have only used front pair as per my personal requirement.I have a verna fluidic 2014 model which comes with very soft suspensions from the manufacturer due to which the underbody touches speedbreakers and potholes easily . The main culprit is the soft spring coil which are excellent on good smooth roads but a nightmare on the majority of our Indian roads and speedbreakers.I had changed my suspension just 2 months ago with original Hyundai suspensions but it did not address the issue at all.Aftermarket high-end suspension kits were expensive. Another option is to change to bigger profile tyres which again is an expensive option.That's when I decided to go for this spring coil buffer. Here is my honest opinion.Pro:(1) Straightforward and practical solution. There is a noticible difference in the height which has increased by 1.5 Inches.(2) No alterations required to be made to the car for installation(3) For some reason braking has improved in my AT car.(4) Body roll is still there on uneven roads but car has become a bit more stiffer and the boat effect has reduced quite a bit.Cons:(1) installation is not exactly a DIY job. You will need a mechanic as the car needs to be hoisted above and suspension needs to be removed for the buffer to fit.(2) There is a remarkable stiffness due to which comfort levels have reduced by a big margin. So yes you will have to make a compromise on ride quality if you want to save your car underbody / chamber.(3) If speed breakers are approached head on straight then the car glides over pretty well but when approached from an angle you get an uncomfortable feeling of stiffness and the car is all over the place.I have not done high speed turns so cannot Comment on body roll as of now.Am I happy with the product? It's a mixed feeling. It takes away the earlier driving comfort I used to e joy but at the same times gives me a peace of mind over bad roads and nasty speed breakers.

Really good. The action of car is smooth and gentle on running. But the cost of the item is high.

Fabulous product. Installed in my amaze and I must say the GC has increased, my confidence to run my car over breakers has increased even more, road bump has decreased.. I'm truly elated..