🛠️ Flush out the past, drive into the future with confidence!
Lubegard 19025 Kooler Kleen is an 18 oz high-pressure, water-based transmission cooler flush that effectively removes grease, dirt, sludge, and metal shavings. Approved by OEMs and major rebuilders, it prevents costly transmission failures by eliminating buildup and rust without harmful solvents or residue. Designed for easy use with a standard 5/16" fitting, it’s the smart choice for maintaining transmission health and longevity.
| Manufacturer | LUBEGARD |
| Brand | Lubegard |
| Model | 19025 |
| Item Weight | 0.01 ounces |
| Product Dimensions | 9.5 x 2.6 x 2.6 inches |
| Item model number | 19025 |
| Manufacturer Part Number | 19025 |
C**W
Must have
I used this to flush out my trans line along with the radiator when installing my transmission. Man is it helpful. Got my metal savings up and out of the lines.
C**C
Works well, removes clogs in the transmission lines/radiator/cooler
I used this to clean out the cooler lines and the cooler for my GM 4T65E-HD transmission, because the transmission was overheating. The standard tip that comes with this doesn't work well for GM quick connect lines, as the line connection points aren't threaded, but I just bought the "universal tip" Kooler Kleen (O'Reilly Auto Parts only sells it) and used that nozzle, along with a make-shift seal. That worked well. My cooler was clogged with junk from the transmission which reduced the transmission fluid flow in the lines and caused the fluid to overheat; this stuff effectively blasted it out. I've used the solvent formula Kooler Kleen, but I don't think it works very well and certainly not as well as this water-based version. This version is under much higher pressure to blast out junk in the lines and cooler.
M**C
Works great.
Should come with assorted fitting for applications.
D**Y
Works great
Works great. Allows for a through transmission flush
T**N
Sounds great in theory
I'm not new to automotive repair. I bought this and a couple rubber hoses and bottles to catch the cleaner fluid.First, the adapter fitting didn't fit my trans. Lines at all! Nothingvto adapt larger or modify onto the steel line. I tap into the rubber part of the line and still cannot make a seal. So I made a mess and had a difficult time properly flush, following directions. It seemed that if the can was PERFECTLY upside down, it will spray cleaner, not just pressure. I got it to work, that's what matters
A**R
Faulty Dispenser
I’m hoping enough got pumped through my auxiliary transmission cooler. I shook can and while slowly depressing button as much of cleaner that was pumping through, an equal amount was blowing out the top of can at button. Not a well made dispenser!
F**G
Hope you get lucky
Bought two cans to flush out a big Mishimoto transmission cooler. The first can worked fine. The second can blew the nasty foam all over me as soon as I pushed the button. The spray button was defective making the product unusable.
G**A
basically semi exploded all over my hand and what I was attempting to flush
the title says it all and others have had this same problem but I thought I'd give it a trial poorly constructed valve. dont buy
Trustpilot
1 day ago
1 month ago