Philips DVP5982 1080p Upscaling DVD Player

The set-up: This DVD player is hooked up to a Syntax Olevia LT32HVM 32" HD-Ready Flat-Panel LCD TV by an HDMI-to-DVI cable and coax (for digital audio to my Sony 5.1) It is controlled by a Logitech Harmony 688 Universal Remote Control (Black).I was a little worried that up-conversion would not work being that my TV does not have HDMI and that converting it to DVI would negate the conversion. Well, if it does, I don't notice. The picture I see -- after fiddling with the "setup" menu for the DVD player -- is amazing. This unit replaced my Philips DVP642, and I can really see the difference in the video. I am running my up-conversion at 1080i, with the color settings at "standard."The remote is a bit on the odd side. I know that all the remotes look the same and maybe Philips wanted to be different, but what's with the white top and wedge-like feel? It looks as though it belongs with a different unit altogether. The buttons are a bit slower to respond than my DVP642, but not by much.Using this with my Logitech Harmony 688: I noticed that the new DVD player plugged in and worked in place of my old one without any changes having to be made to the 688. Sweet! One less hassle.It plays Taiyo Yuden DVD-R (8x) and Verbatim DVD+R DL discs just fine. It also remembers where you left off from the last movie. I put in a disc, played it, took it out, played another and then put the first disc back in and it remembered where I left off. You also have the on-screen option (about 3 seconds) to start from the begining.The on-screen menu for 'setup' is huge, blocky and reminds me of old, old Windows programs. Plus, the color management option is completely useless since you cannot see the screen while you change the options becuase the menu blocks the whole screen. You have to make changes on your TV or keep going back and forth between the screen and menu. Lame. But you do get lots of options on the menu, if you are into fine-tuning the DVD player's video and audio and TV setup.Hooked up the HDMI-to-DVI cable and coax audio and both audio and video worked right out of the box -- didn't need to play with the setup menu. Some DVD players seem to need a bit of setup menu fiddling for certain configurations.I did notice that if I chose the wrong resolution (i.e. 1080p) for my TV, it turned the screen blue and basically locked me out of seeing anything. I had to turn the unit off and back on in order for it to reset.My player came with firmware 37.07.32.40, and when I updated it to 37.07.32.43 it fixed the "set losing resolution setting upon standby." See Philips website for details on upgrading your player. You'll need a CD-R to get the 2 files to the DVD player.Overall, it is an amazing DVD player. Hero and LoTR look amazing. Now I just need an HDMI TV.

I bought this dvd player to replace my dvp-642I was a little scared at first when i switched my hdtv's input to hdmi and the audio stuttered and a green screen came on, but that is the nature of the digital signal and its just checking itself when first switched on. some people say that they don't like the remote control, however I do. This remote is similar in layout compared to my previous philips dvd player.pros:inexpensive for what you getit will upscale to 1080p (whether or not you notice it is up to you)sleek piano black finish with mirrorsusb input works great and is pretty quick, it's a poorman's media centerremote control fits well in my hand and has easy to use buttonsusb function will play xvids!HDMI output, need i say more?cons:my HDTV's built in upscaler is better or equal to the one in this dvd player, so no improvement was noticed with the upscaling functionyou need to dig in a menu to turn on HDMI audioit will not output HDMI audio and coaxial audio at the same timephilips always seems to make the dvd players too small and a little too wide. it is wider than my series 2 tivo, so the dvd player sits underneath it, however it is not long enough in the back. thats just a nitpick thoughit does take a little while to startup, it's especially annoying when you just need to eject the dvd and have to wait about 10 seconds before anything happens.the buttons on the remote are white and semi-translucent, making me think that they would light up or glow, but they don'ti wish the usb input was also available on the back, it looks bad to have an external drive's cord hanging sticking out of the front all of the timekeep in mind that the usb function will not play hd content or .tivo files

I bought this upscaling DVD players for my bigscreen HDTV. So far, I am not all that impressed. I had an older model progressive scan DVD player hooked to my TV before, and to be honest, I don't notice any difference in picture quality. The picture looks nice now, but it looked just as nice before in my opinion.One thing that really annoys me about this unit is the loading tray. It takes quite awhile for it to open when you push the button, so much so that you end up pushing it twice and then it "loads" instead of opens before you realize that you shouldn't have pushed it again. I am not a super impatient person, but it just seems to have quite a delay on it. And as other reviewers have said, it is very flimsy. So flimsy in fact that I actually made the mistake of tipping the DVD player back and my DVD fell out of the tray and INTO THE UNIT!! I had to take apart the unit to get my DVD out. That was annoying. The remote control is very cheap feeling as well and has limited choices. And why is it gray when the unit is black??THe unit does look sleek, has worked fine and I got it at a good price so overall I am happy with it, just not impressed.

The Philips DVP 5982 is really a stand DVD player without peer. For the $59 that Amazon is charging, nothing is close to having its features and quality.The playing of compressed Divx Video (it has the highest level of Divx licensing), look spectacular, especially when connected to a TV that allows for 1080p and wide screen. Unreal. I can fit about 4 full length videos on a single DVD. MAKE SURE that you don't compile a Divx video with a width greater than 720 !! With the upconverting it doesn't matter anyway.I have used the USB input lots of times. For playing Divx compressed video as well as music. Looks great and sounds great.One simple connection with a single HDMI cable to your TV or PCs high level graphics card and that is all that is needed for HD video and audio.The most important thing is how great the output of DVDs, Divx, MPEG video looks and how good the .jpg photos look and the audio sounds.That is the bottom line.Some lose the fact of what they get a DVD player for and what is important is the flexibility of the formats (especially having Divx and allowing for USB in), the HDMI out, the up converting, and how flipping good DVDs and other videos look and sound !!For $59 I am not looking for perfection. Yes, I would like the remote to be laid out better, a few more buttons to run it manually if I want, BUT, it is $59 !!!!!!!!Those that have issues with it playing I guarantee are because they do not understand multi-media and give knee-jerk reactions rather than research it. Plus it always takes some time to get used to the remote and some idiosyncrasies of it.At this price-point, nothing is close.Please don't be a CONSUMER SUCKER and waste money on Blue-Ray and big name products. Lets expand what compressed video can do, which saves all of us SOOOO much money.Jon

I purchased a DVP5960 3 months ago, then purchased the DVP5982 1 month ago in hopes of the DVP5982's new USB2 would allow faster transfer rates from an external disk connected to it's USB2 port. The DVP5982's USB2 transfer rate is minutely faster than my DVP5960's USB1. I have not found any practical difference between the two units or their USB ports (besides the case color). The DVP5982 is almost identical performance to the DVP5960. The DVP5982 is advertised with USB2 and the older DVP5960 is advertised with USB1 but they work almost identical in performance. I am reposting a review that I had made for my DVP5960, with the slightest of alterations for the DVP5982, (mainly substituted model names and changed the TIVO Best recording bitrate lag time from .5 sec to .2 seconds.) This DVP5982 still cannot play my TIVO "Best" recording "Best=5.8 Mbps" without pausing every 3 seconds. I was hoping the DVP5982 would be better than the DVP5960 to meet my needs to play my .mpg-2 TIVO recordings and DVD backups directly from an external disk and bypassing the need to burn them to a DVD but the DVP5982 USB transfer rate is not fast enough yet. If you save money and purchase a DVP5960, I would do that before buying the DVP5982. If not, then purchase the DVP5982, both are excellent DVD players.This DVP5982 player plays everything I have thrown at it on a DVD. Backup movie DVDs, mpeg files of various vibrates, jpg, mp3, DVDMP3. I have other DVD players that play "most" everything but for the money, this player is great. Plays back-up copies of DVDs on all brand DVD (&RW) media so far. Perfectly plays grandson's scratched DVDs that other players stopped playing. Picture is great, same as other posts, standard Composite & Component give a great picture and upscale 1080 does work for even a better picture. Hey, it is not a Blu-Ray player but for a sub-$70 unit, this player is well worth the money.I can use this DVP5982 for my TIVO backed up files. I use Direct Show Utility to change my .tivo files to .mpg files. I found that an external "My Book" western digital 400 gig disk is pre-formatted in Fat32 (plug and play). I copy files from my computer to the "My Book" disk and then I just plug the "My Book" disk into the 5982 USB port and it reads the complete 400 gig. You can move through folders with the remote and select any .mpg or mp3 and play it. (Both DVPmodels filename 8 character length limit can be a challenge when viewing on the TV screen) Video plays exactly as the original recording looked from my Tivo. The only problem is that Tivo can record in 4 different quality settings, Basic. Medium, High and Best. Both DVP players cannot play the BEST recordings from their USB port because the USB ports transfer rate cannot keep up with the higher Bitrate (more data per second)According to info from Google;------------TIVO video is recorded at 2/3 D1 (480x480) resolution at 29.97 frames per second with constant-bitrate MPEG-2 at one of four bitrates:Setting BitrateBest 5.8 MbpsHigh 3.5 MbpsMedium 2.6 MbpsBasic 1.47 Mbps----------------------I found that the "My Book" disk connected to the 5982 USB will play all Tivo recorded settings EXCEPT the "BEST" quality. The "Best" recordings play jerky because the 5982 USB cannot keep up with the higher transfer rate. It Plays 3 seconds then pauses .2 seconds while the 5982 buffer catches up to the transfer rate then plays 3 sec, then pauses .2 sec, and so on, not viewable. The 5982 also plays jerky like this if you try to play DVD files directly from the My Book disk. (but the same BEST quality .mpg files play fine if copied to a DVD or DVD RW, then play the DVD in the 5982)For me, the quality between TIVO's Best and High quality is negligible so I will now set all my future Tivo recordings to High and just put them on the "My Disk" external disk, then move the usb connector to the front usb port on the 5982 to play them on the TV)I can buy a $1000 HD/BluRay player and I can still find something to grip about but for less than $70, the DVP5982 is well worth it.Ok, the remote is a little stubborn and you have to slowly-deliberately press the buttons but it works ok.AND FYI;I formatted a different external disk but with multiple FAT32 partitions due to XP's maximum 32gig "Fat32" format size limit, the DVP5982 will only recognize one of the partitions. You can format any disk with larger FAT32 partitions with an old Win98 PC or a 3rd party format software (or just use a "My Book" external USB disk)

This is a nice DVD player with great options for its money.+) It allows to playback DL DVDs, a true plus!+) Slightly scratched/dusty/finger-printed DVDs are also no problem for this player.+) A nice feature is the device's capability to remember the position of a DVD playback session, which gets stored on the device itself (not sure how standard that is these days). Even when playing other DVDs, the player remembers that particular DVD's last playback position - and behold, when inserted again, the player continues to play from that position! I was awed... but again, not sure how standard that feature is.+) The quality of the movies are superb thanks to 1080P up-scaling (via HDMI), nice to look at with a 52" HDTV.+) The player itself has a very small form factor (very, very flat!) but still has a standard stereo-device footprint (makes it easy to stack). Even if not stacked, the player features a polished black surface, that blends in nicely with most TVs.Overall, we're very happy with the player. Look for specials!

I liked this player.. when it actually worked.Unfortunately at the 1.5 year mark it slowly start fading away. At first I thought it was a broken remote but when I bought a universal remote, it didn't improve anything. The unit no longer responds to remote controls while the buttons on the main unit still work. This doesn't really make life easy since there are only 3 buttons on the main unit.I believe this is due to shoddy worksmanship since I've read similar things about the previous model in this line dying after 1 year. What sucks is that I'm just outside the warranty period (of 1 year). I'm never buying Philips again.

Pro(+)- Price- Picture qualityCon (-)- Sluggish response- Horrible menus- Junk remote--------------------Overall I am happy with this buy. The player is a nice size: slim and shallow but a standard width. The player looks good and works with my Samsung 32" 450 series TV (LN32A450) over HDMI without any problem.I assumed upconverting was a total gimmick. After swapping back and forth between the same DVD in my old player and this one, I'm a convert. Even turning the upscaling off on this player makes for a good comparison; however, trying to do so highlights the limitations of the player.It is SLOW to respond to commands and has HORRIBLE menus. With the TV on and the correct source selected it takes 10+ seconds to go from standby power (with a DVD already in!) to first screen flicker. It's not that 10s is the end of the world; it's just much slower than the average DVD player and a noticeable wait each time I use it.Combine the counter intuitive menus with the slow response and initial setup is really frustrating. [1 of 5 for initial setup] The slow response time and junky remote make getting a movie going less than a joy. [3 of 5 for all subsequent interactions directly with the player] Watching a movie and having it look that good for less than $70, more than covers up the problems. [5 of 5 for picture quality]Verdict: $70 very well spent.=====================Update: After 3 years of light use this player died. It will no longer recognize discs. Given 2 movies / mo over 3-ish years this player worked out to $1 / use. I consider that poor value for the money and will be replacing it with a newer model from a different company.