MCA68-BK Microphone Boom Stand, Mic Stand with Free Mic Clip - Black

I've had this mic stand for a little over a year now, and it has served me better than I could have ever hoped for the price I paid for it. I bought it just hoping for a mic stand sturdy enough to see me through some occasional use until I could afford something more sturdy. However, when the thing arrived, the quality was far greater than I had expected. I'm not sure if some of the lower-rating reviewers were definitely reviewing the same stand (I made sure to check for certain myself after reading their comments), because the joints are not all made of plastic. The T-section joint is metal, with a black powder-coated finish, and the tripod joint at the base is ABS-coated metal. The grip on the vertical shaft (for raising and lowering the stand) is indeed plastic, a tough ABS or similar, but in fairness if this was metal it would undoubtedly ruin the powder-coat finish on the vertical shaft. I was pleasantly surprised to find even the adjuster for extending the boom arm was a powder-coated metal. The screws used to tighten up areas of extension are all reliably strong, and have rubber stops to prevent them marring the poles. Even the rubber feet are yet to disappear into the nether, something I'm sure many people readng this review will have experienced with previous mic stands. I've certainly given this stand a fighting chance to impress, as I've been sure to keep it clean, dry and well maintained (a dab of silicone grease on the threads twice a year doesn't hurt, either), but I feel that this stand could certainly hold its own even if it was just chucked in the back of the van or garage every night! The only bad points I can offer about this stand are 1: There's no supplied mic clip, which for the price I think is fair, and 2: when extended to the maximum height (with the T bar above head height), it's a little unsteady with heaviers mics on it. However, it's unlikely that many people will need to extend the stand that high, especially with the extending boom arm that more than allows for upside-down condensers at a comfortable singing level. A good, reliable stand for a great price!

This was delivered very quickly within 48 hours and on receiving the first thing I noticed was the stand had a good 're-assuring' weight to it, and is definitely a lot more sturdy than the photo makes it look. An issue that 1 or 2 other buyers mentioned was the joint tighteners being below par. I can say that I think that's a bit of an exaggeration and although the main tightener on the stem is plastic it does it's job well enough. With good treatment it should last for many years. The top of the base stem, fully extended, is 164cm (5'5" in old money) from the ground, and the boom is 73cm (2'5") so the whole thing can get your mic 237cm (7'10") in the air. My mic is 350 grams and I reckon the stand could easily hold twice or three times that (and probably a lot more). For what I wanted it for, a small home studio, it is perfect. The clip came with it and will fit most if not all dynamic mic sizes.So ..I'm very happy with this purchase and yes, I would buy another one if and when I need two mics on the go. For this and for the very good price of £20 I give it 5 stars.

This item is certainly cheap and the build quality is OK. Where it shows it’s limitations is when (as others have said) you place a microphone on it at an extended distance and the unit just isn’t capable of supporting it. This is due to the counterbalance weight not being heavy enough but also that the pivot point is just too weak to stop the microphone from drooping.Perhaps I’m being unfair, but this is a typical example of how a lot of “pro” things have become, or things that are sold as “pro” - it’s just made to a price and is not heavy duty enough or sufficient quality.

Good quality and good price.

Seemed pretty good to start with. Bought for my son who's started a band and sings whilst drumming. Holds the mic well but the entire metal pole under the circular locking mechanism was easily bent to a 90 degree during set up leaving this with an extreme weakness. Will buy a sturdier version next time

I returned the stand because there is a design fault with the boom meets the main stand they have decided to use a pinched metal with a bolt through it As the mechanism. This means that you can’t entirely remove the bone from the base and then for example fit a music stand to it. It also means it’s extremely flimsy if you had a iPad adapter or something on the bone it would put that joint under a lot of pressure and I could sit snapping at some point in the future. Overall the quality of the metal is very lightweight and I could not see this being used for professional use. Possibly okay for karaoke for home use whether wouldn’t be too much pressure on it. As the mechanism. This means that you can’t entirely remove the boom from the base and then fruit sample fit music stand to it. It also means extremely flimsy if you had a iPad adapter or something on the boom it would put that join hundred or pressure and I could sit snapping at some point in the future. Overall the quality of the metal is very lightweight and I could not see this being used for professional use. Possibly okay for karaoke for home use whether wouldn’t be too much pressure on it. For a few quid or you can buy a Gravity one from other sources Which is a serious piece of pro kit

The media could not be loaded. For value for money you simply cannot go wrong with this mic stand! What ever your needs are !I wanted this for use with the Razor Seiren X microphone and it fits perfect together !Now when I make content I can have the mix closer to my face for much higher qaulity audio capture.The stand is of excellent quality, very strong and sturdy .It honestly fits my purpose 100% and I can guarantee it will satisfy your needs too.Why pay for something more expensive when this does the same job! And it just looks great too.

Preço qualidade muito bom.

El soporte de micro excelente! Lo recomiendo seguro.

La TIGER MCA68-BK è un'asta per microfono di buona qualità con una clip per microfono inclusa. Questa asta per microfono è realizzata in metallo resistente e nero opaco, il che le conferisce un aspetto professionale e durevole.La clip per microfono inclusa è molto utile e consente di collegare facilmente il microfono all'asta, garantendo una buona stabilità e posizionamento del microfono durante l'utilizzo. Inoltre, la clip è abbastanza flessibile da poter ospitare diversi tipi di microfoni.L'asta per microfono ha una lunghezza regolabile da 85 cm a 155 cm, il che la rende adatta per l'utilizzo in una vasta gamma di contesti, da piccole a grandi sale conferenze e concerti. Inoltre, l'asta per microfono è leggera e facile da trasportare, il che la rende perfetta per gli spettacoli on-the-go.Complessivamente, la TIGER MCA68-BK è un'asta per microfono di alta qualità e affidabile che offre un'eccellente stabilità e flessibilità di utilizzo. La clip per microfono inclusa e la lunghezza regolabile la rendono adatta per una vasta gamma di applicazioni e il prezzo accessibile la rende un'ottima scelta per chiunque stia cercando un'asta per microfono di qualità a un prezzo ragionevole.

It seems well built, but it's very wobbly. It actually fell over a client even when it was secured with a sandbag (wrong end, apparently needs several sandbags to be secure). It's decent and does the job if you need something cheap to use once in a while...but on its own it's not stabile while holding a mic and a mic cord. In other words, it kind of does the job but is not to be trusted. For the current price, it's decent.Edit = just changed it from 3 stars to 1 star...apparently they almost doubled the price since the time I purchased it. At the new price point, it's trash.

Rapport qualité prix ainsi que rapidité de réception, parfait.En effet, Celui-ci est d'une stabilité à toutes épreuves, studio, scène.Son look est à la fois discret et attrayant. À noter un plus, l'adaptateur qui permet une fois la pince enlevée, de dévisser l'embout pour un autre filetage.Je suis certain d'en acheter quelques autres afín d'équiper mon home studio comme Il le faut...TIGER, Souvenez-vous de cette marque et modèle, vous gagnerez du temps et de l'argent. Indispensable !!!