BLCH 1/4" NPT Air Pressure Regulator - Air Regulator for Compressor,Air Compressor Regulator Air Drying System AR2000-02 Gauge 0-160 PSI

Great buy for the money

Works great, no issues with air leaks or anything.

Worked great

Appears to be very high quality, however because of the size of the blue knob I couldn't spin the valve on my compressor without taking the valve apart. If you need to do this here are instructions: 1) Unlock the blue knob by lifting gently until you hear a click. Turn blue knob counter clockwise until it stops 2) Remove four philips head screws. 3) carefully lift top half off the valve. There will be a spring, a brass shaft and a rubber diaphram inside. Remove all parts and note how they go together.4) There is an arrow on the bottom of the valve indicating flow direcrion. Attach a bare nipple on that side and and then a quick connect on the other side. You only need to use 4 or so turns on the nipples using teflon tape. 5) thread the assembly onto the compressor, carefull not to over tighten until the gauge hole is facing you (there are gauge holes on both sides of the housing depending if you want the knob facing up or down. A bung is supplied to plug the hole you don't use for the gauge. 6) install the gauge. Don't over tighten. 7) reassemble the valve, tightening screws in a criss cross pattern.

The regulator on my compressor was leaking. After replacing with this my compressor is back in operation.

I ordered the first one and it leaked around the adjuster knob. Amazon REPLACED IT BUT THE SECOND ONE LEAKED IN THE SAME SPOT!!! I would not recommend this item.

Good product!

Works well as a wall mounted in line application. Too large to be mounted on the tool. Good quality construction, and easy to use. Good value for the price.