JACKYLEDLED Strip Connector 4 Pins 10PCS T Shape, 10mm RGB Quick Splitter Corner Connector Solderless Gapless Adapter Clip for RGB SMD 5050/3528 Multicolor LED Strip Light Connectors

I’m new to LED lighting, but I found everything straight forward and easy to use.I would recommend this product

Working as it should. Bit flimsy. Actually need take time to cut led strip and slide it into connectors. Don't remove any backing paper from strip or adhesive. When I did that at first, no connection, couldn't make it to work. Looks like clips don't have enough pressure to copper led strip connectors. Definitely value for money.

Easy to use and helped give a professional look to the led lights fitted to my son’s ceiling. Will definitely use again

Bought these to connect lcd lights, they were tricky to use but did the job once they were opened

Perfect for the job. Bought them to fix an issue with the LED light strips in my display cabinets. I have Billy bookshelves with glass doors to display various models and I wanted some lights. I bought LED light strips which can be cut to size and fitted them to the inside of the glass doors, on the wooden frames. These work great for lighting the cabinet, but the corner connectors that came with them were useless. They had individual cables to go around corners that were too long and got caught all the time, and they used a tension clip to lock the LED strip in place, but it had no lock. So over time the LED strips work loose, and then you've got incorrect voltages jumping the corners and the colours are all wrong.These corner connectors fixed that instantly. They are the perfect size, sit flat so won't get caught as the door closes and the lock prevents the LED strip working loose.Recommended.

Excellent 10mm connectors - surface must be VERY clean to stick - fiddley if your lighting is water resistant like mine , used craft knife to remove silicone carefully

Only buy when you have loads of time in your hands. Not easy to use at all. Low quality. Waste of money.

The pins just don't seem to make sufficient contact with the little copper spots on the LED strip.I bought them to make laying down strips easier than using a soldering iron but I have to say: this process is not as easy as it seems - more often the connectors don't make good contact with the strip winch, which makes some or all colours not working.ⓘ You can make it work by bending the pins of the connectors downward, but it involves quite a bit of troubleshooting with a multimeter which totally defeats the idea of making it easy!Now that I've bent and fixed the connector pins, everything works perfectly!