JDictionEpoxy Resin Clear High Gloss Epoxy Resin, Maximum 1.5 Inch Deep Pour 1 Gallon Casting Resin for Jewelry Making, Table Top, Wood and Mold Crafts

I recently tried the JDiction Epoxy Resin Clear High Gloss Epoxy Resin for a DIY project, and I couldn't be happier with the results! This resin is incredibly easy to use, making it perfect for both beginners and experienced crafters alike.One of the standout features is its very low odor, which was a pleasant surprise. Unlike other resins I've used in the past, this one didn't overwhelm me with fumes while working. It sets up quickly, allowing me to complete my projects in a timely manner without long wait times.The high gloss finish is stunning and gives my projects a professional look. I’ve used it on a variety of surfaces, and the clarity is impressive. It also cures hard and durable, ensuring that my creations will last.Overall, I highly recommend JDiction Epoxy Resin for anyone looking to elevate their crafting or DIY projects. Its ease of use, minimal odor, and quick setting time make it a fantastic choice. I will definitely be purchasing more for future projects!

I love JDiction! I have used several different brands, but found for the price, ease of use, and quality of my pieces, this is my 'go to' resin! Gives me very few bubbles, crystal clear and has earned my confidence in knowing it will produce as expected.

Easy to use. It comes with pump tops! [unlike others you have to buy seperately] Dryness is great and adhesion excellent. The size. I bought was 2 gallons. This resin's drying speed is fantastic. Definately recommend. It's crystal clear, and super hard when cured. Great product.. I also use this brand in uv resin!!Update: Just ordered more! 12-2024🥰

This stuff is great. I use an epoxy stirrer with a metal stick and I have no bubbles. 7 minutes works for me. This stuff cures pretty fast. I use it in a fairly warm room due to 3d printers and no complaints so far. Would highly recommend for molds.

I use this product for pouring blanks to turn into duck and goose calls. After allowing the items to cure over an extended period of time, up to 2-3 weeks, the items are very hard and turn well. The only downfall to using it for what I do, is when turning the cured product down to the 5/8” diameter needed, I have noticed the products heat up when sanding or turning on the lathe and loses it’s rigidity, becomes a little soft if you will, and can deflect a bit. Also making the polishing to a mirror finish a little difficult. I don’t makes pens or bottles stoppers, so I have decided I will utilize the product for more of my bulky projects and leave the thinner diameter projects that need or require heavy polishing to a different product. Otherwise it is a good product for doing resin art projects more conducive to a thicker final product.

I make resin art and jewelry for a living. First off, the performance that every resin advertises is based on factory controlled working environments. I have the ambient temperature set to 75F and a dehumidifier set to 50% or less, which seems to be the general recommendation. Every resin fail I’ve had has been because of high humidity or cold temps.This resin is my favorite so far.PROS- super clear, like glass clear when cured, unless the silicone mold is poor quality or humidity is too high. Also doesn’t seem to attract dust like other resins but I vacuum my studio regularly and have an air purifier.- virtually no bubbles when cured - I use a small electric mixer and pour in layers of 0.5.” Always when working with resin, temp has to be high enough to encourage gas to escape but low enough that cure time isn’t accelerated and gas gets trapped before reaching the surface. It’s science, people. I even accidentally introduced a ton of bubbles when not paying attention to the submersion of my mixer and they disappeared once poured and hit with a heat gun. Also haven’t had a single issue with micro-bubbles, the low viscosity isolates gas and they dissolve quickly- the resin comes out slightly blue tinted, unnoticeable except to the trained eye, and this prevents yellowing. I think it makes for a really attractive finish. Other resins look dull in comparison.- easy to maintain surface tension which is helpful for when I accidentally overfill molds - just remove a bit with a syringe and it easily self-levels- no odor when using and no off-gassing odor when cured. Other resins I’ve had to submerge cured products in baking soda before I can sell them because the products reek- handles dyes and inclusions really well - no streaking, flowers stay submerged and don’t rot, bubbles don’t adhere to them.- finished products are oleophobic (resist fingerprints), hydrophobic, easy to carve and polish, don’t scratch easily and don’t break when droppedCONS- The minor (in my opinion) trade off is the short work time (20-30 min) and long cure time. I mix in low quantities (4-7oz) and pour in thin layers, recoat after 20ish hours. I leave fully finished pieces in the mold for 48hrs to be safe, but I have a large workspace and can work on multiple pieces at a time.- Also, the locking caps are annoying to clean. I don’t use the pumps. Lotion bottles, soap bottles, etc use pumps and the reverse gravity suction action introduces air. Don’t do it. Just use accurate measuring cups and a steady hand.I highly recommend this resin for pros and even beginners if you pay attention to the required working conditions. It’s beautiful to work with and low stress compared to others. And my art sales are up!

Jdiction resin is made in the USA and delivers from Amazon next day with a Prime account. This gallon comes with pumps that are surprisingly accurate. Each time I get to the bottom there’s just a teaspoon of difference in the two parts. No smell or noticeable fumes. Bubbles come out with a few minutes in the vacuum pot. Lest than $50.

Very good product. Sets up reasonably fast and easy to work with. End results are perfect