Carbon Fibre Vinyl Cleaning Brush

It takes all the dust off the vinyls. Very easy to use, it's normal size and works perfect. 100% value for money

What can I say a big improvement on pre carbon fibre products OK. So since a child of 8 years I have never not been able to play vinyl 33 1/3 Rd + 45 R.p.m. as well as 78's (shellac) discs maybe I show my age (68) but with age comes a lot of experience and yes I use factory pressed & home burnt discs C.D-D.V.D & B.D.. From the earliest of times I recall a impregnated cloth marketed by E.M.I under a name that made it hard not to know who was behind the product but like all products of that type they dried out even if stored in a seal (in the days before moulded top of bag reseal action thus ceasing to do an effective job. In the early 70's a better solution arrived that would clean the disc while it played a small bottle of antistatic solution came with the device. I use two of these to this day one for each Turn Table. ( I keep 1 T.T for vinyl & one For shellac as I have a moving coil PU for shellac) which does a real good job backed up with a felt type of pad with short supposedly microfibres to deep clean microgroove disc's. I was never totally happy with the pad used wet or dry I never felt it was really doing a total job. The day before the review product arrived I played a L.P vinyl by the Shadows , having duly cleaned it prior to playing with the method which over the years I have found both the cheapest & simplest way of eradicating dust & static charge. The disc plays to The end of the last but one track and in the silent grove between the last track on disc & the track just played I heard a almost thunder clap from the disc I thought oh what damage might that have done to the diamond. Being busy at the time I stored the disc in its sleeves -1 Paper-2 art printed card & -3 outer PVC plastic. So today I thought I would see if the review product could work some kind of magic removing what ever had been the cause of the fireworks the day before. I simply did as recommended on the review products packaging so far as cleaning a disc prior to playing. I played the same side that the day before had let rip. The disc finished; where had the fire cracker gone? only the normal sounds in the run out to the discs end. the deck lifts the arm shutting of the motor as normal. How nice I thought; wow will I be able to clean all the inter track near silent places on the disc I'm thinking. So I gave it a go and yes while not 100% silent a improvement was detectable after just a half minute at each inter track location which I hope with repeated use of the review product will progressively improve over time. So I now await the arrival of the matching antistatic cleaning pad much like the velvet pad I had in the past. So I noted that a device similar to the cleaning whilst playing device is offered on web site will I replace my ancient devices ( RIP Cecil B Watts) or go the whole hog and get the powered machine for real deep disc cleaning I don't know yet.

Recently came into possession of a turntable and a few vinyl albums which still had the dust a dirt on them from the decade they were produced. Gave them a clean with a micro fibre cloth, like I would a CD, which did an admirable job but still left behind deposits and unfortunately static. I was no sooner removing dust and fibre's before they re-attached on a different part of the LP. After a quick Googling and old school advice from the parents, I found out about Vinyl brushes (well I'm a cassette and CD generation lad). Can't say I was too convinced about the possible effectiveness but at £6 it was worth a shot. Delivered and straight into the vinyl. Well what do you know, cleans the grooves well, removes the top dust and no static! Brush needs a bit of a dust off after use but should keep me going for quite a while.

Great service for a quality product from a good seller.

Some products/ designs Just work and his is definetly one of them Looks Identical to the one I bought from Boots 40 years ago and sill have Last year I bought a Carbon brush but found it ineffective compared to my old Boots audio velvet block. This one is so much better and much cheaper than the carbon bristle brush. So a day after receiving and using it for he first time I knew I had to order another. Now my logic behind this is so I can have one impregnated and always have a wet one and a dry one to hand (since you can add liquid through the top ). It does a really good job at removing dust from my Albums old and new and reduces static. I use it off the platter a quick wipe before and one after playing. It doesn't need pressure as the friction from the micro fibre is enough. If you need more pressure then time to wet clean The stylus brush is vey soft and will not remove heavy build up from the stylus however since using this I find the stylus stays cleaner I sill use a Carbon fibre stylus bush but not as often now, as these blocks are so good. I recommend buy one. Actually scratch that at this price by 2!

Works well

This was bought for my nephew to use on his new records to go on his new record player on recommendation from my sister.

I’m no turntable expert, or audiophile, but I recently upgraded my turntable to a Technics. A GREAT turntable and well setup. My only gripe was that the supplied rubber slip mat is a terrible dust magnet. I was looking for something that would at least solve this problem, without changing the setup drastically and these are perfect for the job. They’re also VERY good quality- which surprised me at the price. Someone looking to replace a thicker mat may want to look elsewhere, but I can’t fault them. I’ve had no issues with them lifting off with the record so far either. Some may worry about changes to the VTA etc, but it’s really no different than going from a 180g record to a thinner one.

Brosse longue qui permet de nettoyer un 33T en un seul geste. La brosse est douce et nettoie bien les vinyles à conditions qu'ils ne soient qu'empoussiérés. Sur le dos de la brosse, un petit compartiment offre une mini brosse à poils longs pour nettoyer la tête de lecture. un petit plus fort appréciable. Si vos vinyles sont sales ou avec des traces de moisissures (ce qui peut arriver quand ils ont passés des années dans un grenier) la brosse ne sera pas suffisante et il faudra au préalable décaper les vinyles avec un produit adapter. Néanmoins, s'il y a juste un peu de poussière, la brosse sera amplement suffisante pour nettoyer votre vinyle et retrouver une lecture et un son nickel ^^

Top !

Easy use. Make every lp come clean again.

Works well and the only one you need.

Sprawdza się idealnie. Polecam