Headbourne Wooden Floor Hat Coat Umbrella Stand, Pine Varnish

Easy to assemble and well finished, looks good too

If you know what a screw driver is you will be fine.For £25 I wasn't expecting too much, but to my surprise this is actually a sturdy item. the finish is great, no rough, unsanded/unglossed areas, looks and feels strong. Mine is currently holding a variety of different coats and jackets from windbreakers to thick winter coats and it could easily cope with 12 heavy coats (1 on each hook). A happy surprised not mentioned in the description is that the top section spins so this could be put in the corner of the hall way and you would have no trouble getting to the coats at the back as you simply spin the top section to get to them.There are a few little niggles but nothing that would stop me from giving it 5 stars.Firstly is the colour, it is a lighter shade than in the picture. Mine also rocks ever-so-slighty when I had it on my tiled floor, which I can assure you is perfectly level, but this isnt actually and issue for me as it is stood on carpet and is perfectly fine. The outer edge of the ring on the bottom of the stand doesnt sit flush with the legs that its attached to, it sits inside of the tops of the legs, giving it a 7 mm edge on each leg, it doesn't detract from the function of the stand, its just a little ugly and slightly annoying.Took me 10 minutes to piece it all together, the only thing you need is a phillips screwdriver. A doddle.Not a perfect product, but well worth the money and because of this I would get it 5 stars.

Watched husband put this together in 5min. Was easy for him. It's up and ready to use. It'll only have outfits hung on it for the following day but is sturdy enough for a few coats or jackets. I would not put loads on as I doubt it would last under a lot of weight. Nice colour and is balanced and sturdy on the floor.

Does the job, Initially got the item and one piece was defective but the seller sent a replacement and it seems to be working well

The screw to erect the stand wasn't long enough and made the stand very unsteady and which broke within 28 hours of assembly.

It's made out of some type of particle board with a uniform paint to colour it. No wood grain pattern or anything like that, completely uniform. Not the best finish in the world but it works nicely for the price and would be hard waring I'm sure. Assembly was easy enough certainly don't know what people mean by difficult assembly, it's a simple enough design. The instuctions were lacking I suppose, but the picture was plenty for me. That being said I'm fairly familiar with flatpack assembly at this point. The holes don't line up as well as they ought to, but again for the price well enough in my opinion.As for strength i've hung all my motorbike gear from it which is quite heavy stuff couple of leather jackets and kevlar jeans with a few normal coats to top it off. It's plenty strong enough for normal use and more. It dosen't feel like it's going to topple over when I take a pair of jeans and a jacket off either.Overall I am pleased with the product but I'm not about to go raving about it down the pub, It's done its job.

Bought to replace my old coat stand which was 30 years old and cost £30 at the time. Apart from the colour, I would say that this one is exactly the same including the price! If it lasts as long as my first one, it will be money well spent. Not too difficult to put together and holds quite a few winter coats and scarves etc.

When putting together you'll realise the holes to do not match up the holes of the attaching part. Very cheap looking.Good amount of space for jackets

Trots titeln är kryptisk så är det en tamburmajor:-)

Queda muy bien, bonito y funcional en madera, tal y como esta descrito

Fácil de montar

Leider steht er etwas schief,aber sonst Top.

Es muy fácil de montar, aguanta bastante peso y no ocupa mucho espacio.