Glass Polish 50mm Glass Scratch Removal Kit for use with a Drill on all Glass Surfaces - GP28002

What a kit, I followed the instructions ,didnt have the nerve to use the really coarse discs, just the powder.With a good bit of time, windscreen wiper scratches where removed.I did three screens, better with practice , good kit.

Product is cheap and nasty for price glue comes off back of sand paper at low speed destroying the pad . Ive been machine polising cars for 35 years and the pads last a good 6 to seven months this product lasts five miniutes deffo not worth the money

Good result not that easy to use bit messy took 90% of scratches away overall happy with results

Was a little dubious about this product, but thought I'd give it a whirl on a semi-bad scratch on a hob glass.Took some time to get it to come up to a shine again, but when done was almost perfect.OBEY THE INSTRUCTIONS!!!! USE A MAINS 240V DRILL AND NOT A CORDLESS ONE!!!

good product polished out light scatches to my windsceen easily . would recomend this to anyone .

I had a scratch on my windscreen from when my wiper fell off. I used this product with one of the soft clothes supplied and it wasnt working, I then used the small drill attachment and now ive got big swirl scratches on top of the original scratch. Waste of money.

Very good for light scratches and scuffs, arrived in good time, thanks.

It's hard work but it does get the scratches out if you persevere.

I works and feels like cerium oxide. Technically a jeweler's polish. I totally cleaned the interior of the windshield. Why? so that I could use a whiteboard marker to mark the more scratched areas from the inside. Now, with the more severe areas marked off. I didn't use a corded drill, I used a battery operated drill that I primarily bought as a screwdriver. (for precision drilling, I have access to a drill press at the school where I graduated from and my daughter a recent graduate and my son a student lets alumni use the fabrication lab, so I have no need for a corded drill). Working a 12" by 12" square, I used a couple of drops of the included compounding solution. I also had a spray bottle with distilled water in it. I worked the 12" x 12" square for a long time, keeping the surface wet and checking the temperature, by touch. I took a completely charged battery and worked that 12"x12' square until the battery died, about 2 hours. I tried another 12"x12" area for an hour and that made it better, but not optically clear. I takes the full two hours to do the small square area, continually keeping it wet and not too hot to touch. Is this a fast process, not at all. It is a slow process, but nevertheless, it works. At first, I took care of the worst spotsThe point about it must be with a corded drill, isn't necessary true, but it might be stated just so no one complains. Light duty battery drill worked fine. But with the felt polishing pad, I got my windshield polished. Maybe it took longer than with a corded drill. Patience is required.

Hice todo lo que pone en instruciones y ni quito los arañazos sino que ademas quedo a manchones opaco y mas rayado hablo del cristal de acuario al final tuve que llevarlo a una cristaleria y meter el cristal nuevo allí me digeron que ni ellos pueden quitar los arañazos y menos con lija

This product made any scratches in the windshield substantially worse. The polish provided does not have nearly enough abrasives in it to remove the fine scratches left over from the kits sandpaper. And the sandpaper, oh boy, the kit doesn't provide you with enough sandpaper to properly remove a scratch in the first place. You take the lowest grit it has to remove the scratch you originally have, but each consecutive sandpaper, from green to blue, doesn't remove the scratch before it. Would recommend going to the hardware store and buying 500, 1000, 1500, 2000, 3000, and 5000 grit sandpaper, along with some metal polish, to remove any scratches you have.

Arbeite im Glasbereich und bin geübt in Glaspolieren....war ein Testkauf! Nicht einmal minimale Kratzer lassen sich entfernen!!!! Produkt ist absolut wirkungslos

premetto che ho un buon trapano avvitatore e ho usato quello...il trapano normale temevo fosse troppo potente...ho fatto un primo testo su un pezzo di vetro preso da un vetraio... l'ho graffiato con un sassolino e ho provato prima solo a lucidarlo, e dato il risultato mediocre, ho provato a levigarlo..il risultato è stato anche peggiore perché laddove il feltrino levigatore è andato a lavorare ha graffiato ulteriormente il vetro... dopo di chè si è rotto forse a causa del calore...insomma il polish da solo fa pochissimo ... forse con un pò di pratica, metodo, e il giusto trapano potrebbe fare qualcosa... però consiglio cautela... tanta cautela...