Tatub Twin Floor Bed with Rails and Door and Slats, Montessori Bed Frame for Girls and Boys, Wood Montessori Floor Bed for Kids, Grey

Easy to assemble, comfortable for toddler and safe for night sleeping with a child who moves a lot in their sleep. It is difficult to find a mattress to fit the length since you need to find a smaller height one, but a pool noodle at the end worked for the gap. This bed has given our child more independence in being able to get in/out of bed while staying staff at night with the safety latch.

Purchased this bed for our 2yr old! It’s a really solid frame, finished well, and easy to put together. Only set backs are it only hold 200lbs which we placed extra wood underneath bed and plan to reinforce the corners, the railing with the opening is a little wobbly which we also screwed in a piece of wood to stabilize it, and the mattress is a standard twin and we had to shove a blanket at the top as the frame is a little bigger, but overall it’s a great bed for the money. We have an 8in mattress and a comforter on top with a good amount of railing above.

I had wanted a floor bed to give my daughter independence. I ordered the pink full size bed for my daughter and am in the process of transitioning her to her new room so I wanted something I could lay on with her while getting her used to it or if she gets sick, etc. The pink is definitely more of a light bubble gum pink instead of mauve but it is still cute. The frame was easy to put together and feels solid when I am getting in and out of it but the slats that come with it to support the mattress are thin, wobbly, and not very sturdy so I needed to reinforce them to be able to hold both our weights and a 70lb 7inch eco kids avocado mattress (great mattress by the way! Hard enough for a toddler but doesn’t feel like I’m laying on bricks either).I went to my local hardware shop and had them help me make two 73in (legth) x 3in (width) x 2.25in (height) pieces of solid wood and put those underneath the existing slats touching the floor, anti parallel to the existing slats along the length of the bed. Note that height was the most crucial part but not easy to make since most slats only come in up to 2 inches so we ended up nailing two smaller pieces of wood together to make up the 2.25inch for each side. I slid those under the existing slats, one on each side of the bed.Then I purchased Greaton, 0.75-Inch Vertical Wooden Bunkie Board/Bed Slats with Cover, Enhance Mattress Support, Full. Put that on top of the existing slats and then the mattress on top of it all (with waterproof topper of course). It feels very solid now and supports my weight and my husbands great so we can get our daughter in/out the bed or lay next to her or if she jumps on the bed. I put sticky traps along the perimeter on the floor to o deter any bugs since it is a floor bed.The avocado full size mattress we got fits fairly well on the sides but there is some room at the corners. I ended up buying two of these to cover all the edges: BreathableBaby Breathable Mesh Liner for Full-Size Cribs, Classic 3mm Mesh, White (Size 4FS Covers 3 or 4 Sides). They help cover the corners too and keep her arms/legs from getting stuck in between the rails.Then I ordered Oodles of Noodles Deluxe Foam Pool Swim Noodles (6 Pack) and put those on the tops of the rails so she can’t hit her head. They are not too big and fit perfectly.Note she can easily get out of this bed but the point was never to keep her locked in but rather just to keep her from rolling in her sleep which, with all the modifications I made, she still has a good 6” of railing to prevent her from rolling off the edge in her sleep which is enough. We didn’t attach on the little door but I will keep it handy if she starts rolling the length of the bed in her sleep.

Great quality, sturdy, looks good

When the bed first arrived, i was so excited and was immediately was crushed after unboxing. One large support wood arrived lightly cracked. It was a surface level (not deep) crack so i figured it would be ok since my daughters only 25 lbs and the bed is advertised as holding a weight limit of 200 lbs.Im 150 lbs, so i figured both of us being on the bed together should be ok....I got my twin mattress 2 days after assembling the frame and there was a six inch bed between the twin mattress and the frame.HOW IS IT POSSIBLE THAT THE FRAME ISNT SIZED FOR TWIN BED? I HAD TO SPEND MORE MONEY TO GET A BUMPER to fill the gap to reduce the risk of my toddler breaking a leg... ok, i got the bumber no big deal.My daughter and i were on the bed reading and i heard a loud crack.. THE FRAME FULLY CRACKED.. THIS BED IS GARBAGE MADE OF CHEAP WOOD. OMG.SAVE YOURSELF THE HEADACHE. I WISH I COULD DO ZERO STARS

Overall, it’s okay for the price. Beds similar to this were going for over $700 on Etsy. Pretty easy to put together. No strong smell like other reviews mentioned and nothing came damaged.A few areas could be improved. There are not enough slats for support underneath the mattress. We bought a twin size slat board that worked better than the seven individual ones they provided. Our mattress is a twin size, 75” x 38”, and made in the United States. We have significant gaps between the mattress and the frame, but it doesn’t seem to be an issue with our toddler. I don’t see it lasting him long, but it’s a good transition bed from a crib.

The twin mattress fit perfectly in this and it was raised at a good enough height that my little escape artist stayed in bed. I faced the door against the wall instead of using the lock and that worked great for us!

Very sturdy and easy to put together!

this took over 2 months to arrive and when it finally did, It isn't at all a wooden floor bed but a plastic fence. DO NOT PURCHASE FROM THIS COMPANY