













🚪 Seal the deal on comfort and security — don’t let your garage miss out!
The Holikme Garage Door Seal is a 22-foot flexible EPDM rubber weather stripping designed to fit standard garage door tracks with a 5/16 inch T-end and 4 1/8 inch width. It offers superior resistance to extreme temperatures (-40° to 240°F), ozone, and UV exposure, ensuring long-lasting durability. This seal effectively blocks wind, rain, leaves, and pests, enhancing energy efficiency and garage security. Included end plugs provide a tight, stable fit, making it an ideal upgrade for homeowners seeking reliable, year-round protection.





| ASIN | B0BFF6QC43 |
| Best Sellers Rank | #13,012 in Health & Household ( See Top 100 in Health & Household ) #1 in Threshold Ramps |
| Brand | Holikme |
| Color | Black |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,316) |
| Date First Available | September 15, 2022 |
| Item Weight | 5.29 pounds |
| Item model number | UOGDS-22FT |
| Manufacturer | Holikme |
| Material | Rubber |
| Number of Items | 1 |
| Product Dimensions | 264"L x 3.74"W |
| Recommended Uses For Product | Door |
| Unit Count | 22.0 Feet |
F**R
Good product - Installation tips
I bought the 22ft roll for my 20 ft garage door. Many reviews say it's short by a few inches so I wanted to be sure I had enough. As it turned out the product measured almost 22ft +1 inch on an 85 degree day in Houston. The product was soft and pliable and well packaged in a roll.. Installation tips/requirements which helped me, your results may vary. It does take two people to install this seal in the track, one to pull and the other to bend the seal into the U shape and carefully guide the T-edge into the track. If not properly held and guided into the channels the T edge will come out. BOTH sides of each T must be in the channel to secure it properly in place. If one edge pops out you need to back up the seal until it is seated in the track before continuing with the installation. Failure to do this will cause the seal to fall out of the track later on. Be fore you start, make sure the track guide channels are clean of all sand and dirt as well as the rubber edges on the door seal. I had mud in mine which needed to be brushed out and wiped clean with a wet rag. Also make sure all screws that attach the track to the door are tight and fully seated to prevent the seal from catching them during the installation. I found dish soap/water did help in the beginning but dried quickly and stopped the seal from sliding in the tracks unless I kept the entire length wet. This goes for both the channels and rubber seal. I switched to a Klein Tools Clear Wire Lubricant used to help pull wires through conduit. This is a safe clear lubricating jelly and I found the rubber seal to slide much easier along all 20 feet. Also to assist with pulling the seal, I used vice grips to grab the seal and give something better to hold on to. I didn't see any ripping or tearing while using the pliers. In my case I had an extra two feet of seal if there was any damage. After the seal was installed I grabbed and slid the seal very slightly back and forth in the track to be sure there was no tight tension in one spot or looseness in others and did this along the length of the seal. The new seal is good and tight, no light showing through under the door. Pictures included.
B**Z
Company provides exactly as advertised
I purchased this for an 18' garage door so I bought the 22' package. I first went to my local garage door people here in town, they wanted 58 dollars for exactly 18' of material. Not only was their price exorbitant, but the rubber was very thin & felt like it would last a year if I was lucky. So I went on Amazon and found this product. As soon as I opened the package I could immediately see & feel this was a MUCH better product. The quality of this rubber is thick, but yet soft and adaptive to imperfections of your garage floor. My wife and I installed it in about 45 minutes with no surprises throughout the install. The "T" part of the rubber fit perfectly into our rail on the bottom of our door. The only thing we did was after removing the old piece of rubber from our rail was take a brush from my dustpan and brush off the rail on the bottom of our door of dirt and debris. The measurements listed on their picture are very accurate as well. I am VERY happy with this purchase and would highly recommend this product for any homeowner that doesn't want to keep replacing it every 3 years or so. It is a quality product & delivers exactly as advertised.
T**O
Easy to install and high quality.
The metal track came in multiple pieces along with the rubber seal, lubricant and screws. The track was easy to line up so the rubber seal would slide through easily. I screwed the tracks onto the door and started sliding the rubber seal in by myself. It went in very easy at first and then it got harder to do it by myself. I got my son to pull a little on it while I shaped the rubber and slid it forward, that made it go very fast and easy. It looks very good and seems to be high quality. I am super pleased with it and would highly recommend it.
M**B
Good Replacement
This seal has worked well since installing it a few months ago. My old seal was letting water into the garage and allowed the door to lower too far, so every time we opened the door there would be so much stress on the entire door mechanism we were waiting for the day the door was just going to collapse! This seal gave proper alignment back to the door and now we have smooth openings again, and no more water creeping in. I am mechanically inclined so I didn’t have an issue doing this myself. It took about 90 minutes to do. It would definitely be easier with two people installing. The only downfall so far was the screw installation. They do not mention pre-drilling the bracket before installing the screws, which I found to be necessary. The instructions mention just use the provided screw driver to screw through the metal bracket into the door. It’s doable, but very difficult. I would recommend pre-drilling some pilot holes first, but make sure to go much smaller on your bit compared to the screws provided in order to prevent stripping.
T**K
Easy Fix for Drafty Garage Doors
I installed the Holikme Garage Door Bottom Seal on my garage, and it made an immediate difference. It sealed the gap perfectly, blocking out cold air, leaves, and even a few bugs that used to sneak in. The material is thick and flexible, and it conforms well to the floor — even with some uneven spots. Installation was straightforward with the included adhesive and screws. I cut it to size with a utility knife and had it up in under 30 minutes. It’s held up well through rain and temperature changes, and the garage feels noticeably more insulated. If you’re dealing with drafts, water seepage, or just want to keep your garage cleaner, this is a simple, affordable solution that works.
M**T
Sealed my garage door and was offered in longer sections, so I didn't have to use two pieces.
Great product to seal the bottom of your garage doors. A bit of a pain in the rear to install (make sure you pre-grease the track) but works great and seems to be good quality.
A**R
We replaced our old seal with this one it was perfect.
P**S
Very good quality. Cut to size and install as per instructions. Since installing last fall, No water, bugs or mice. Highly recommend!
F**S
Fonctionnent très bien.
P**S
Bon produit et facile à installer avec un peut de savon à vaisselle
A**P
Works well if you have a level Cement floor that lines up with the bottom of your garage door.
Trustpilot
2 weeks ago
5 days ago