ICOOL 50 Ft. Mini Split Line Set, 1/4" & 1/2" O.D. Twin Copper Pipes, 3/8" Thickened PE Insulated Coil Copper Line with Nuts for Air Conditioner HVAC Refrigeration and Heating, without Fittings

line sets come with No FLARE & NUTS , The shipping company (loomis) did not delivered to my address and gave me an address for pick up. I have not install them but the line sets looks good

Perfect line & flares, for 4" wall tube, tape wraps 8', Wire is 22" short. Buy wire if you do not cut the line-set and make sure it is perfect flare if you do! Micron gauge & high quality 1/4, 5/16 core removers & hose is a must! Make sure to follow the "school video" on proper procedures (pull to 120 microns with 1micron/min. increase at finish), 4X pull is normal. Perfect result and longest and highest efficiency will be achieved. 4th set (prof. cut the first 3) perfect. 22" from indoor to their line-sets & 16" up into the outdoor. Measured 5 COP annual avg. on -22F type splits in upper NY.

Well package. Delivery on time.

This line set installed very easily. I installed three mini split indoor units and used this roll to make the runs. The copper felt lighter (thinner) that I'm used to working with. For this reason I used flexible bender strips to keep the pipe from kinking while making my tighter bends. I cut and flared all the ends. The tubing ended up with perfect flares on the first attempt and passed all leak checks (pressure and vacuum). This tells me the copper is good quality, uniform and clean. The line set functions well and has been running for several weeks without issue. The insulation material looks and functions very well. The tubing is not pre-charged for a DIY system. You will need a good understanding of plumbing, vacuum and refrigerant if your installing this line set yourself. I would call this a budget friendly line set that works well if you use care when installing it. It is a good value.

Lions work perfectly. I would highly recommend this set.