BCZAMD Large Silicone Mat for 3D Resin Printer 510X510mm/20in Clean-up or Resin Transfer to Protect Desk Clean Work Mat for DLP SLA LCD Photo S Satur V1 V2 Monoo 3D Printer Accessories

I have not had any problems with mine

Big enough for a mid-sized resin printer plus some, fits on a desk and came quickly.

I've been using silicone griddle covers in my resin printer work area as slap mats which have high 1/2-inch side walls. These are great for containing big spills, but those high side walls also can get in the way when doing clean-up work on prints. This Imdinnogo slap map has a low raised edge which makes it a better choice for my model clean-up area mat. The low raised edge which will still contain some resin spillage but will not be very effective for a large spill, so I'll stick with the griddle covers with higher side walls underneath the printer.

This silicone mat is great for when I'm working on my projects and need to use a blade to cut and not worry about cutting into the silicone pad. The pad is very thick and has a border around it to keep any moving pieces from rolling off of it. I really like that this pad. The nice thing about this silicone pad is that it is made for resin printing and if any resin gets on it the pad is very easy to clean up.

I have been using this mat for several weeks and it has done its job well!I don't have to worry about spilling resin on my table and leaving a sticky residue. It came in a good, manageable size. It isn't "paper thin" and has some decent heft.The resin was easy to clean off the mat with IPA and a paper towel. Just make sure you choose a size that works for you.Overall, I would definitely recommend this for anyone who does a lot of resin printing and wants an extra layer of protection.

I ordered this for my 3D printer and it gets the job done. Its anti-slip and helps to prevent movement on my table while printing. I also like that anything that drips or falls on the mat can easily be wiped up with a wipe or comes off without any issues. Definitely need one of these for your printer.

I purchased these to sit under my 3D resin printer for the drips and possible spills. An accidental spill did occur and to my shock this silicon mat that was advertised for this use bonded to the liquid resin. Day after day in the sun failed to cure the effected areas of the mat. Hitting the areas with 405 UV light failed to cure the resin spill areas. IPA failed to clean up the mat and get the resin off.Finally after a week in the sun I opted to throw these mats away.This wasn’t some special resin either this was standard Anycubic resin which cures just fine in my printer.Rarely do I ever trash a product on Amazon even when it is rubbish. But I must stress do not buy these if you intend to use them for 3D printing.I will go with the recommendation of other 3D printers and go with a certain orange colored brand.

It's not bad and it functions as stated for large resin globs and easy release for set, but curing resin.Let down a bit because this seems very similar to my full sheet pan sized silicone liner that I stopped using because cookies didn't cook right when I used it for baking. Even the "rim"/ border of this is like the pan liner and much shallower than I was expecting. It's a maybe 1mm increased height to the perimeter, less wall than I was expecting for flows protection.Big globs are picked off easily, smaller were more difficult and "may the Gods be with you" if you try to wipe a resin spill with paper towels out of habit and try to get it off once dry. The big resin drops seem to discolor the mat which has a matte finish and the areas that resin smeared have a reflective shine despite washing (twice) and wiping with solvent. It looks much more used than it is which is disappointing considering this is twice the cost of a name brand "platinum" food grade silicone sheet pan size mat that is so similar to this "specialized" product.Not sure that it's the product or the particular environment that I used it, but this was SUPER static clingy/ charged in use (not great for keeping resin product clean/dirt/dust/hair free).This is NOT the same mat (or a like interpretation) as the orange one in the Youtube videos that are just "pull this way, pull that way" to release resin and dump globs in trashcan, done. I'll probably spend the extra money on that brand next time.LSS, it works for what I need, for now, but if I had seen it in person I probably would consider other options.

Excelente calidad esta grueso y grande, lo super recomiendo, un poco caro pero vale la pena