Corsair Dominator Platinum Airflow RGB LED Memory Fan - Black

I'm using 32gb of g.skill at 4133mhz cl 16 aida64 latency 37.6 at 1.5v and I was able to drop from 56 to 44 fans speed at maximum and you can't even hear the noise, very happy with the purchase i didn't expect that much drop of temp.

Easy to mount ,but the mount is not that secure for example if you are moving the pc frequently you should take the cooling out,it will work for almost ani tipe of ram memory ,

Easy to install, looks great, connects to Icue no issues. Lovely product and yes I'm a Corsair fan boy !

Rather flimsy when fitted as in stays loose and too much distance between cooler and ram. About an inch+ gap. Fans look like cheap ones and not the quality you can compare to larger fans used by Corsair

Very good

if you want to cool your ram water cool it this is mostly for show in my opinion

Has little to no impact on rams cooling, lights look good,

Easy to install if you have a spare pwm fan header and USB 2.0 port to link the fan and the supplied lighting node pro into. The fan speed can be controlled by your motherboard fan controller software, whilst the lighting is controlled by Corsair's 'iCUE' lighting software through the lighting node pro. Make sure that you connect the RGB cable to socket 1 on the node pro as the circuitry won't operate unless this is observed, you then have socket 2 to link a lighting node core to accept control the LEDs of up to six identical fans, or, a daisy chain of up to six of Corsair's own LED strips.The advantage of this over Ram Modules with LEDs is, this will work with all modern motherboards whereas unless your motherboard has inbuilt LED functionality you won't get the LEDS on the Ram Modules to illuminate or they'll be permanently in a display cycle that'll eventually drive you crackers depending on the brand of modules bought and you'll have no control over them. Non-illuminated Ram modules are also quite a bit cheaper than ones with LEDs on.I have fitted two of these, one to an Asus Sabertooth Z77 Mk 1 with DDR3 modules many because the Ram was getting very hot due to overclocking; this motherboard has no onboard LED control. Whilst the other on an Asus Sabertooth Z170 Mk 1 with DDR4 modules again no onboard LED control. They are bright enough, though the colours are slightly washed out and the fans can be set to cool without creating excessive additional noise, all things considered I think the package is extremely good value.

Nice addition to me build. Not super cooling power but looks great. Colors controllable with Corsair RGB controller which was why I bought it. Fits over top of my tall heat sinked ram. Quiet operation.

Ein sehr gutes Produkt und kompatibel mit der Corsair Lüftersteuerung

De calidad

Esta guay y eso, pero las luces Led no es que se puedan controlar... en fin estéticamente esta chulo, aunque actualmente no sirve de mucho 😅

Acquistato per sostituire il CFDAM che era solo ad un coloreSoddisfatto del prodotto, tutti i componenti del mio PC sono Corsair RGB con software ICUEGrazie ad Amazon e a Corsair per ottimi servizio e ottimi prodotti