Roof Rack Side Rails + Cross Bars for 2016-2022 Honda Pilot Roof Rack Cross Bars Rooftop Luggage Carrier for Rooftop Cargo, Kayak, Canoe, Bike, Snowboard

We love these roof rack rails! They came Recomended by our mechanic. Installation was straightforward and fit our 2018 Honda Pilot perfectly. The finished product looks great!

The roof rails and crossbars are fantastic! Easy to install and high quality. The only issue I had was the instructions never showed where to use the washers for the rails and for the crossbars. Other than that, the instructions were clear and the packaging was great to keep the items protected and secured to prevent bending of the long lengths of the rails. Recommend these rails and crossbars for quality and value when compared to OEM parts and labor.

I had to buy the special nuts from Honda. 8 x the 8mm and 6 x the 6mm, which ended up costing $80 with S&H, which made this basically a $400 purchase. Not the great savings that it would have been if it came with the right fasteners. Something else to note, the plastic molding (roof rail), only allows the fasteners to be screwed down maybe a quarter of the distance on the bolt on the car... I can only assume with the Honda OEM rack the nuts sit lower in the slot and more of it can grab the roof bolts. I slowly tightened everything and not extremely tight as I was concerned it would shear off the threads. I used loktite in the hopes this prevents anything coming loose. Guess time will tell. Other than that it seems decent when in place. The cross rails fit well, other than having to enlarge some of the plastic holes because they don't align between the end caps and the screw holes in the rail. ----- 19 July Update ---- So while throwing out all the cardboard packaging I found the set of sleeve nuts and washers. So my complaint about having to buy the parts from Honda was due to my own fault. The sleeve nuts (8mm at least) are slighly longer than the Honda parts so it gets a good grip when you tighten them down. I still caution against over tightening, but you won't hvae any concerns about them coming lose. I would still suggest some loctite type product. I didn't give 5/5 as the issues with the cross bars still exists, where I had to slightly enlarge the holes so there was some play to get them to line up on both sides.

The roof rack and side rails were installed on a 2021 Honda Pilot. The videos provided a great guide for the installation. I did not run into the issue with the nuts being too short, but I would recommend using some clear silicone to hold the rear cap in place and also agree it is a good idea to order the recommended tool set and Loctite. Made the installation go very smoothly and it looks like it came with the unit.

Fast delivery

It did not come with the back triangle covers. Thankful for the video tutorial. Guy said in the video that everyone breaks those covers but don't worry, you get replacements. Well, I didn't get replacement covers, so I was super careful when uninstalling the original covers. I had to cut down the cover to fit (cut it so it would leave room for the bolt and rail system to hook up properly, you will see, just cut it like you do the original rubber/aluminum gasket you have to cut. same concept.) anyway. Once cut down, I reinstalled the original triangle covers (now cut down to size) and continued installation. Worked great. Only took one afternoon to do it. [EDIT] It's been a few days, and the corner sections completely pulled away and broke in half, so I need new corner sections (again, those did not come with this kit). This all could have been avoided with some double-sided tape to put in the back inside plastic peaces, which I didn't think to do. at any rate, now I'm in the market for new back-corner trim peaces.

Great upgrade. Follow the video. Easy to install. Hands down the pilot looks way better.

They fit great. You have to really torque them down to get them to sit flush on the roof of the truck

Good stuff, two hours install.