10GBase-LR SFP+ Transceiver, 10G Singlemode SFP+ Duplex LC Module,Compatible for Cisco SFP-10G-LR, Ubiquiti UF-SM-10G,Meraki MA-SFP-10GB-LR, Mikrotik, Supermicro, Netgear,SMF,1310nm,10km,DDM

Perfectly compatible with netgear and 10G smf

It does what it’s supposed to do. Not much else to say.

Not much else to say. Verified full 10G speeds with Unifi Pro Max and Flex switches.

Exelente calidad y compatible con lo que menciona en el anuncio lo probe con distintas marcas y funciona a la perfeccion

As advertised

Using these transceivers to accomplish a 10gb link between a mikrotik router, a ruckus switch managed switch, and a keepLINK unmanaged switch, keeping the SFP matching between on either end of the fiber for 2 of those connections. They were quickly recognized by the SFP+ ports and linked up at a 10gbps link speed with no hiccups. So far temps have been reasonable using the old finger feel test. Good compatibility and good speeds! My internet is only 1gbps but I’m seeing 980mbps on Speedtest.net and will be doing a local iperf soon. Fair pricing and good connectivity!

Overall the 10GBase-LR SFP+ Transceiver worked great with the handoff from my ONT to my Unifi Dream Machine SE. The performance was great and for the price of the transmitter, this is certainly an affordable unit with great performance that will not leave you disappointed. This paired with my fiber cable, I was able to measure 0 loss to the switch and achieve rated speeds.Now, the largest potential issue here is the brand does not have a website, additionally I was unable to locate Wuhan Baijitong Technology Co in having an online presence. The largest potential problem that comes into play here is trust. Since this is generally going to be sitting either from your ONT handoff to your gateway or your gateway to your switch, it is in a position of a lot of power to affect your security negatively. Since this is technically a computer chip, it would have the ability to proxy requests and/or send traffic to other areas of the internet. Therefore, I have eliminated the transceiver from the network at this point until I am able to locate additional information on the chip to ensure that it is trustworthy.

I found myself in need of an extra ethernet port on my Ubiquiti Switch (US-24-250); rather than add another switch, I decided to move my uplink from a copper RJ45 port to one of the SFP based ports instead. I was surprised to see a 10Gb SFP come up on Amazon Vine to review, but I ordered it and waited patiently to arrive. Once it was here, I verified it worked in both Ubiquiti devices and ordered a second one out of pocket. The SFP is recognized immediately on insertion and has had no problems after connecting with some fiber I’ve had sitting around for years. Sadly, my switch only has a 1Gb SFP port, but both modules auto negotiated their speeds and has worked flawless ever since. I’m always a little leery of using unknown Chinese branded equipment, but it seems to work just fine. Also, this is internal to my network and can be monitored and firewalled before it goes outbound if it were to ever be a problem. Admittedly it’s been years since I’ve purchased SFPs for work, but I couldn’t believe how cheap these are compared to the Cisco ones bought in my past. I was skeptical, but would use them again if the need arose.