ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing (Black+Black, 2kg)

I've used many types of resin in my projects and while they are all good, the ANYCUBIC 3D Printer Resin is by far the best and most reliable. I use my resin printer to produce very small objects such as model accessories and figures. Never have I had any problem with ANYCUBIC 3D Printer Resin and plan to use it on all my projects into the future. It assembles well with glue and takes paint with excellent results!

So far this is my favorite resin. I have been using it since it came out and it is not as fragile as the regular resin and it shows detail perfectly!

This bottle is huge and the resin is thick . It makes great 3d prints but the smell is strong. Also when I put it in the cleaning station I have it come off pretty good ! Great product will buy again

Great quality resin for excellent price, works great in all of the Anycubic printers with factory slicer settings. No problem with adhesion to the back plate and removes easily.

I picked this up because I wanted to experiment with a clear resin that wasn't going to yellow shortly after printing. This reviewed well so I picked it up. Printing on an M5S Pro using Anycubic's instructions led to repeated failures. Bed adhesion was fine but the recommended exposure time was too low. I bumped it up over the next several prints until finally I was happy. For me it ended up being 15 seconds, which seems super long but it's given me several successful prints. Support removal is challenging since you'll see every flaw but with some care it's not too bad.I also followed Anycubic's finishing instructions to really make prints clear. I definitely recommend it. A small paint brush, lightly brushing the finished cured print with a thin layer of the clear resin, then recure and you'll have a crystal clear print.

This is not as bad of an odor as I thought it was going to be . all the prints come out perfect

I am currently using the High Clear resin with the Photon Mono 5s printer. The High Clear resin requires higher exposure times than the other AnyCubic resins I've used, otherwise it will be prone to avoid adhesion problems, supports stretching and warping the model, etc. I didn't realize this at first and mistakenly thought "High Clear" was short for "High Speed Clear" since they are both on the same product page, and so I promptly dialed in the wrong settings on my very first print with it - oops! Lesson learned: pay attention to the details and don't make assumptions based on the name. Still, I kind of wish they'd called it "Super Clear" or better yet given it a separate product listing to avoid that potential confusion. Anyway, High Clear may print slowly, but I feel the end result is worth it and so far I love this resin. The model in the picture is cured but unvarnished and was printed using the default 0.05mm layer height. I have also used it more recently at 0.03mm layer height at roughly 80% of the recommended exposure for 0.05mm and the results are great. High Clear performs much better than the clear eco resin I used previously, both better at avoiding yellowing on post-cure and seems like it may be more resilient (I haven't done any formal drop tests or other serious stress tests; this is just based on how flexible thin parts remain). I have used the High Clear resin in a minimally ventillated room with a VOC meter and it does indeed seem low VOC during printing and also when having small amounts of liquid resin and just-removed models sitting exposed to the air. Once a model is washed with alcohol (but before the final post-cure), the drying/evaporation process does cause a small spike on my VOC meter - but even leaving a very wet model drying in open air for a while doesn't read as high for VOCs as if I use even a small quantity of rubber glue in the same room.

I have printed roughly 100 minis and several large busts and props using this resin on my Elegoo Mars 3 Pro and have been extremely pleased. It paints nicely as well!

Excelente calidad de resina para imprimir

Llevo 3 años comprando está marca y sin falla alguna

The media could not be loaded.  Agrego parametros para usarla en Anycubic Photon M3,El truco para regrear su brillo es lijar con lija fina y usar un aerosol brillante transparente.

Todo excelente

muy buena resina no e tenido ningun solo problema con ella, la calidad me gusta, un poco olorosa, pero creo que todas son asi, por eso compre los filstros de carbon