PLA + Filament 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, PLA Plus Filament White 1KG

I have been using this PLA+ filament for several 3D printing projects and I am very impressed with its quality and performance. It has a high dimensional accuracy of +/- 0.02 mm, which ensures smooth and precise prints. The filament I purchased has a vibrant yellow colour that looks sleek and professional. It does not fade or change with temperature. The filament is eco-friendly and biodegradable, as it is made from plant-based materials. The filament comes in a 1 kg spool that is well-wound and has a hole to secure the end of the filament. The spool also has a label with the weight, diameter, and recommended printing settings. The filament is vacuum-sealed with a desiccant pack to keep it dry and fresh. It also has a resealable ziplock to store it after use. The filament is easy to load and unload, and it does not clog or jam the nozzle. It also has good adhesion and layer bonding, which results in smooth and strong prints. I have printed various objects with this filament, such as models, tools, toys, and decorations, and they all came out great. The filament is consistent and reliable, and it produces high-quality prints every time. I highly recommend this PLA+ filament to anyone who wants to print 3D objects in a yellow colour. It is a great value for money and a superb product.

This isn't the clean white of other PLA that you can buy, it's more of an off-white more like the colour of milk. However, that is about where this ends in comparisons to other pla. The only other one I've used that comes close to this is by eSun. This item from Elegoo, it's damn good.Using this in a cr6se, the melt point starts at around 210 degrees, but it's not quite right at that level. I have best results with 215-220 degrees. It melts cleanly, it lays cleanly, there is a great deal less threading than from other pla that I have used, which means one can reduce the amount of retraction that is needed to keep the print clean. I have had a little trouble with pre-melt in the ptfe tube, but replacing the fans on my printer for better ones stopped that.Prints are clean, and clear which is the important thing. I have had clean prints with low quality settings, and very clear and sharp prints with higher level settings and a smaller print head. While I will still use other pla manufacturers - as I don't need high quality pla for prototyping, this brand will definitely be my go-to pla for quality prints.Excellent material for a good price and reliable performance that is predictable across temperature and head size ranges is important. This pla gives me that reliability and I will be changing my primary prints to this material. Worth every penny.For those who care, the spool reel is made from recycled material and can be recycled. I will say that it makes a nice change from the more common plastic reels.

This stuff is great! I have an Elegoo Neptune 3D Pro so it seemed sensible to use their own filament at least to get me started, and it's superb, perfect prints every time and just about the best price for filament anywhere. I just wish they'd get the red PLA+ in stock in single reels and I'll buy it IMMEDIATELY, and the grey too, hehehe, if you want other colours then there's always eSun and Overture etc.

The media could not be loaded.  This arrived in a brown branded box with the filament sealed in plastic with a bag of silica to avoid any moister contamination. The reel is compressed card with specifications printed on the side, I personally really like that most manufacturers are moving to a move eco friendly type of spool, and do try to buy this type.I set the spool up on my Ender 5 plus and enlarged a simple articulated teddy print to 160% with a 0.6mm nozzle, lightning infill with a density of 20%, and nozzle temperature 205°C. The print took 12 hour using approximately 160g of filament.I found this printed nice and smoothly with no tangle issues or pulling on the reel which you can sometimes get with the filament sticking to the next layer on the reel. The filament is what I would describe as a satin finish, which I find good for model making and painting as it seems to take paint better, and is easier to sand and fill. This filament is nice and solid without being too brittle and I found the model articulated perfectly as soon as it was removed from the bed.Overall in my opinion this is a good solid filament for models that are to be painted, although the colour is fine it would not be suitable in bare state for display items such as vases, place mats etc. It would be suitable for more practical items such as hinges, kitchen hooks for t-towels or similar. I have been using the remaining filament on a project I am working on and it is performing well with no issues. This filament works really my only real issue is I don’t like the colour of the finish to be used when not painted. I have used this same brand before with the white filament and that also worked very well, I have added images from the white as well with a Mario model.

Had few issues with adhesion first but after tuning splicer it is good filament. No tangling, and no tearing of filament so far( i used half of it already).

My usual brand was out of stock so I decided to try this, so far it's been great. Printing at 210/60 and it works a charm. The matte black is more of a very dark grey but I like it!

Lovely finish with this PLA. Other black PLA I’ve used has been glossy and not finished nicely.

Prints fine good pla