CrealityOfficial Hyper PLA Filament Blue 1KG, 3D Printer Filament for High Speed Printing, Durable and Resistant, Smooth, Overhang Performance Dimensional Accuracy +/-0.03mm, 2.2lbs/Spool

The idea of the hyper PLA is that it enables higher speed printing. I have tested the filament on an Ender 3 S1 plus which I would usually print at 50mm/s on at 0.12mm layer height. The last item I printed was with the Ender White filament, and it a box type item at 0.12mm layer height.In the attached photos, the smaller/whiter item is Creality/Ender white filament for comparison, the larger item is this product Creality Hyper-PLAI printed out a new version of this box using the hyper PLA. I sliced this version at a print speed of 200mm/s. I do find that the S1 wasn't built for great speeds, and I find that often the firmware limits the acceleration quite harshly. This version was larger than the previous version by about 25% (you can see on the pictures a change in colour for the added bit of print, as this area has a different backing). Although it is larger the quoted (and finally achieved) print times were about 10 hours/30% less than the original print. Being impatient I decided to hit the speed up to 200% in the printer too, which was a mistake.The X axis slipped. I am not sure whether this was a printer fault, or the filament fault. Prior to slipping the head has bumping along the print on the far edge. This edge has bobbles on it coming out towards the front of the machine. It is as if the filament is extruding slightly too much.I printed again just at the 200mm/s without doubling the print speed. This time the majority of the print was OK. However I did observe bulging again on an area near the top of the print.The filament is slightly translucent, and it definitely isn't as white as the Ender filament. The bridging/overhang seems to be OK, the curved areas on the photo were vertical overhang. The fact that the hyper PLA is 'darker' on the back of the print here is partly because it is translucent.

PLA is ubiquitous in FDM printing, because it is cheap, varied, and requires reasonably low temperatures. It's not particularly strong, however.This Creality PLA, to me, is no different to the PLAs that I use at less than half the price. I had no issues at all with it on my Creality Ender S1 Plus, but I have had no PLA issues at all with that kit anyway.The dimensional accuracy on the filament diameter is a little better than many other brands, but that isn't a unique selling point, in my opinion. Still, for all else equal, the smaller the tolerance the better.I do appreciate the fact that the PLA is vacuum packed (as most or all are) which reduced moisture in the filament when in storage. Also, there are cutouts which indicate the amount of material remaining in the spool. How accurate this is, I'm not sure, but I like that they did that.So for me, this is a good PLA, but not really worth paying the extra for.

This is the first filament I have tried from Creality and I'm impressed so far.I printed using a Bambu Carbon which tends to makes a good job anyway but the finish on this is particularly good.Prints with zero issues on generic pla setting.The cardboard reel is good as it's recyclable but not so good if you have a Bambu as it won't work in the AMS system unless you respool it.

This filament is great. It is well made with a consistent width and is very nice to print with.It is PLA so fairly easy to print on most printers. It worked great with my standard PLA settings and came out very nicely. The bed adhesion was good and the prints came out very nice.I ordered the white colour which is very good and a nice, clean white. Some white filaments I have had weren't a perfect white but this one is very good. Overall, I would certainly recommend it.

The spool of plan filament is good quality. It has no knots or kinks in the roll. I have used this on my ender s1 plus at bed temp 60 and nozel 200. The filament has heated and stuck together well. The pieces I have printed have come out perfect and solid with no gaps. It is a little more expensive than I usually pay but would happily by again.Recommended

This CREALITY printer spool came packaged well as with any other spools I’ve had. Vacuum packed and sealed from moisture. It’s a nice quality PLA for the price and a simple Grey colour. It stuck to the bed easily and printed fine with minimum stringing. As with most printers and spools, you’ll have to fine tune these with a small test print before any large print. The Hyper PLA advertises being stronger compared to ABS so this should hold up well without needing to use ABS which I’ve always had nightmares with. Overall I’m happy with the quality for it’s price.