Creality Official Honeycomb Workbench Platform 235x235 for 3D Printer, Compatible with Laser Module, protect the 3D Printer from Damage, All-metal Thickened Structure,More Stable and Durable

This is much better than the stick bed plate that I got with my Ender S1 but I discovered that there is a double sided version soon after ordering with one side smooth and one rough. Never mind this is an excellent upgrade and you don’t need to install the super sticky adhesive magnetic layer if you already have one on your printer so it’s just a drop on replacement. Prints adhere well (I mainly print in PETG) which was a problem before upgrading and they also release quite well too. It will get scuffed up over time, mine already has a few dings and bubbles here and there but it is doing it’s job well. I would say this is a great and inexpensive way to upgrade your 3D printer particularly if you are having trouble getting the first layer down.

I got this as i was having issues with adhesion with the stock glass bed, initially i was concerned it wouldent be perfectly flat but it is pretty good, Adhesion is great, No more hairspray, and if it becomes the case where adhesion is lost simply wash it and let it air dry, its as good as new again. Residue is also extremely easy to remove, the print basically falls off after the bed is cool, I wish i had invested in this ages ago, as the amount of frustration it would have saved. Been using for about a month and its perfect, would highly recomend it.

So I bought my Ender 3V2 a while ago, initially using the glass garolite bed, or whatever it’s called, that came with the printer. It was decent enough but was getting a bit worn out.I then bought a smooth gold coupe PEI magnetic sheet. Some random brand. It was ok but I found prints stuck a bit too well to it, and slowly it was getting marks and little bubbles appearing which then affected the prints.So I decided to try out this sheet from Creality. What a difference! Prints come off so much easier when it’s cooled, it leaves a nice texture on the parts that are on the plate and it just feels way better quality. So far, so good. If there’s any sudden failure or something I’ll update the review but it’s been near perfect so far.

This is one of the best mods that I have invested in for my Ender 3 V2!I was always skeptical about printing on anything other than glass to the point that even after this sheet had been delivered it took me 2 weeks before I summoned up the courage to try it out. Oh my! I wished I had done it sooner!Not only does the PEI sheet offer amazing bed adhesion it also allows you to remove your print as soon as the print finishes. No waiting for the bed too cool, just bend the sheet and your print pops right off with no need for a scraper whatsoever. Another bonus of being able to remove your print so quickly means if you are running multiple prints you do not have to wait as long for the bed to heat back up as it hasn't had time to cool off.The PEI sheet has a very nice smooth finish so your prints always have a lovely smooth finish to the base of them too.The magnetic sheet of adhesive is really simple to apply and fixes firmly to the existing metal bed plate. When applying the adhesive magnet be sure to start along one edge and wipe from side to side slowly working your way across the bed plate to ensure all air bubbles are avoided/pushed out as you lay the magnetic sheet. Once applied it is as simple as placing the PEI sheet on top and that's it.Being magnetic it makes for easier cleaning with less chance of knocking your bed leveling out of alignment as you just lift the sheet off and place it back on when finished.No need for clips so you even gain some extra bed area too! Not having to contend with clips along the sides of the bed means you can also print closer to the edges than you would with the standard glass bed.This is by far one of the best mods I have made to my printer and I will likely never go back to printing on glass ever again. I highly recommend the PEI sheet upgrade!

I bought this for my new Ender 3 S-1, which after two months developed severe adhesion and blocked nozzle issues. To cut a very long story short, after a further 3 months, I now have the printer working correctly again and it is currently using this double-side PEI plate. I have spent a large amount trying to 'fix' the machine's Sprite head and stop the CR Touch from hitting my prints and detaching them from the print surface. I tried a Creality glass plate but this PEI one seems to work better.The smooth side of this plate produces (unsurprisingly) an extremely smooth first layer. It seems to offer good adhesion yet prints are easy to remove by simply bending this flexible plate a little. Information (and support) available from Creality is extremely sketchy but I believe the textured side of this plate is meant to offer better adhesion for some prints. Either way, it's good to be able to flip it over and try the other side when having issues with a specific print.The plate comes with a handy replacement self-adhesive layer, but you do not need to install this unless there is something wrong with the original one your printer came with.I'm thrilled my printer is finally fixed but based on the amount of aggravation and money spent, would never buy a Creality product again. All they seem interested in is selling you more spare parts to remedy whatever problems you are experiencing.Incidentally, the CR Touch can potentially pull your prints from the plate due to inaccuracies in the way Creality manufacture the screws and bracket that hold the Sprite, which allows far too much play. You may need to loosen these screws then push the Sprite hard into the bracket when tightening them again, in order to fix it perfectly level.

I’ve printed about 15-20 items in PLA and PETG on this and it has great adhesion but parts come off easily after cooling. It leaves a smooth shiny finish on the base of the printed part.I lift the sheet off the magnetic bed and let it cool at room temperature before flexing the sheet a bit which normally lifts an edge off so I can peel it off gently. I clean it with isopropyl alcohol.It’s so much better than the sheet supplied with the Ender 3 V3 SE which parts stick to too well.

bello che è usabile su entrambi i lati

Despues de 2 meses de uso, y haber tenido la superficie original y la de vidrio, tambien original de creality, esta es la mejor superficie de impresión que he tenido.Solo he probado la cara de PEI, ya que siempre imprimo en PLA, sin embargo me gusta que tenga dos superficies distintas ya que he leido que el PETG estropea la superficie de PEI, por lo que si puntualmente imprimo algo en PETG, tengo la otra cara para ello.

Sehr zufrieden hat immer ausreichende Haftung und eine sehr schöne Oberfläche

The media could not be loaded.  Non immaginavo minimamente una aderenza così perfetta e pulita. Ammetto che appena visto e al tatto si sente la ruvidità, ero rimasto deluso ma ho voluto provare. Risultato? Bellissimo sotto tutti gli aspetti. Ha dato un tocco in più sulla parte che appoggia sul piatto. Lo consiglio vivamente e dirò di più ne ho preso altri due e sostituito alle altre. Nel video si vede una forma anche di eleganza e pulizia di come è il piatto.

fint