COLAMY Upholstered Parsons Dining Chairs Set of 4, Fabric Dining Room Kitchen Side Chair with Nailhead Trim and Wood Legs - Blue Bubble

Boy, there are a lot of positives. To begin, the chairs arrived quickly, the packaging was terrific, and there was no damage to the chairs when they arrived. The chairs seem to be nicely constructed and are very sturdy once assembled. I bought two sets of two, and the chairs all matched perfectly. I am overweight (not obese, but overweight), and these chairs are comfortable for a long visit after a meal. The seat has springs and straps for support and a foam cushion for comfort. The back is curved subtly for lumbar comfort as well. There is no way a dining chair is going to be as comfortable as a $1000 recliner or easy chair, but they are above average for a dining chair. I really wanted blue pu leather for an update to my kitchen because I am too lazy or too old to paint my lower kitchen cabinets that color. The upholstery is a nice blue color, feels nice, and cleans easily with a damp cloth. With the darker color, I can’t imagine a problem with stains. Overall, I think the chairs are very attractive, and the nailhead trim on the seat really sets them off. Each chair leg has a protective pad on the bottom, and the front 2 legs have screw-in furniture leveler glides.Now for the assembly. There were a couple of reviews that made assembly seem very hard, but it was much easier then expected to assemble the chairs. The only tool needed is the allen wrench provided. All of the nuts and bolts required for assembly are nicely organized and notated on a shrink wrapped card, along with the allen wrench and an extra of each type bolt and nut. The instructions are very clearly written, and laid out logically. In the reviews, there are misstatements or things that are simply not true made by those complaining of issues with assembly. 9 bolts are required for each chair seat (2 for each of 4 legs and 1 for the center back), and not 5 as mistakenly reported. It is hard to convince me that a hammer or mallet were useful to anyone other than they just like to “whack” things. Bolts are made to be screwed in and not hammered in. Someone even sawed off the back legs because the chair felt too pitched forward but I suspect the chair levelers which add about 1/4 inch in height were missing or fell out from the front chair legs. (Two of ours were loose in the box.) To assemble, ifc you lay the back of the chair down flat, you can set the seat bottom frame perpendicular, as shown on the instructions, and then you can line up the bolts. If you only screw the bolts in 50% of the way as instructed, you can even lift up the seat and see where each bolt goes into the back legs, and wiggle or maneuver a little while turning until it seats. It does help if there is a second person to help hold and steady, but it’s not absolutely necessary. I have put together many different types of furniture since buying my first piece of Ikea furniture 40 years ago, and these chairs were easy to put together. I also want you to know I am am 69 years old with severe arthritis, and I am a girl!I will say the wood is darker than pictured even though it is not an issue for me. Also, the way the upholstery is trimmed out underneath the chair bottom is not as nice as for a $300 dining room chair, and realistically, you cannot expect it to be for the price. These chairs were just what I was looking for. I am completely satisfied with this purchase and would not hesitate to recommend or buy again.Thank you!

These chairs will arrive boxed two chairs per box. The chairs are not assembled but the assembly instructions come with the chairs. The chairs are easily assembled using the provided instructions. The chairs are attractive and sturdy.

The media could not be loaded.  I purchased 6 of these beautiful chairs. I read reviews on how difficult they were to assemble and they did NOT lie!On the very first chair I saw why...the holes for the screws had glue/tar gunk in the groves. I had to get creative, so I used a flashlight, a sergated kitchen knife and my screw driver to clean it out to be able to properly drive the screws into the chair.This process made each chair take atleast 15minutes or more to assemble. The video will show that after all that process, you end up with beautiful, comfortable chairs, with wobbly legs. They instructions do tell you how to fix that, but it doesn't work. Also each leg has little floor protectors, but my floors are tiled so they keep peeling off. Putting the assembly and legs issues aside. These chairs give an elegant feel to any dining table, they are really comfortable to sit in and somewhat affordable ( though it will cost you to make adjustments, IF you keep them ).

Overall extremely happy. I wanted to update an old and very traditional dining room set, so bought these to replace the two end chairs. It did what I needed for an unbelievable price. Mine will only be used once in a while, so I won't be able to comment on how they stand up over time.Color: I pictured them a little lighter than they were, but mostly because of some reviews. I ordered the f-beige and it's pretty close to the pictures. The fabric is about as neutral as possible (no yellow or other noticeable undertones) so that's a huge plus.Quality: I was amazed at how clean the fabric was, and there were no scratches on the wood. NO TAGS on mine, which apparently some people received. I personally don't like the zipper going down the back and that would keep me from ordering a whole set. (Note that the zipper isn't functional because there's fabric stapled over the end that would open.) I only ordered two, and where I put them the zippers aren't usually visible.Assembly: Reasonably easy for one person. The parts are well labeled and there are spare parts included too.I'd definitely buy again,, especially after looking around online, on marketplace and in stores.

I love the comfort, style and color of this product. It matches my navy end chairs. It was easy to assemble. The quality of the drilling for the holes is spot on. I may purchase two more as I want a bigger dining table. Great product.

I purchased these after we lost our vintage (close to antique age) dining room chairs due to frozen pipes/water damage. I didn't want to spend $400 per chair (replacement value) yet still wanted padded seats to use for the dining room table. I sat in a chair similar to these at our local furniture store, but their price would have been $200 per chair. When I saw these on Amazon, I decided to try them out because of the price. We've only had them a few days so I don't know how well they will last - I doubt as long as the ones we had because they were made from cherry wood. However, these ARE more comfortable than what we had and they look great! I put them together by myself and it took maybe an hour all together for both of them. Everything you need to put them together is included and I thought the instructions were easy to read, understand and follow. There were no issues (such as legs/holes being misaligned) as some claimed in their reviews. So, IMO, either they got a bad batch or put the front legs on backwards (which would be easy to do). Follow their tip (in directions) on not tightening the screws until the chair is basically all put together. I like these so much I'm planning on ordering at least two more chairs and possibly four more.