JDiction Silicone Mold Making Kit, 2.32lb(37oz) Super Elastic Liquid Silicone Rubber Fast Cure Soft Mold Making for Casting Resin, Candle, Soap Molds

I've wanted to make silicone molds for years and always found the material to be too expensive. This seemed to be the right price. I've now created multiple molds with this material and have had no issues whatsoever. The molds came out bubble-free and were successful in casting plaster.For ease-of-use and to use less material, this is how I used this kit:1. Place a container on a digital scale, zero-out (tare) the scale.2. Pour part A into this container, take note of its weight.3. Pour part B until the scale reads two-times what it did for Part A.4. Stir slowly with the included popsicle stick. For a standard soup can, I would make one rotation in 4 or 5 seconds.While stirring, scrape the sides and touch the bottom of the mixing container periodically to ensure all material is incorporated into your mix. Don't remove the stirrer or go fast as it can incorporate bubbles.Finally, pour the silicone mixture very slowly into your mold box but not on the item itself. It is less likely for air bubbles to be trapped by pouring to the side of the item instead of onto it. I held my soup can around 2 feet high and allowed a very fine stream to flow into the box. The overall pouring time was between 3-5 minutes.I didn't use the included silicone measuring cups and feel it is unnecessary for what I'm doing, as well as a potential waste of material (material remains after you pour it, and this stuff comes with a premium).It was too cool outside here for proper curing (less than 70F), so I took a small space heater which measures about 6" tall, placed it in front of the mold, then laid a box over everything, with one side of the box resting on top of the heater. This allowed the temperature inside the box to get quite warm (80-85F - ish), and it cured no problem.Finally, I was able to pour plaster of Paris and cast my pieces which came out lovely. No bubbles in the final plaster product. Quite satisfied with the results and this product.

Very pleased with the performance. It works very well. Will buy again, soon.

Pretty darn good silicone. Set up fast and easy to mix and work with. I'll buy this when I need to make a mold.

The process of making for a bit messy. The silicone rubber itself is pretty easy to make just fill one part of each. Nice product.

Considering the price and the amount you're getting, the quality is excellent. The cure time is quick, taking only 5-7 hours, making it very convenient, and it molds with great detail. Once fully cured, it’s hardly sticky at all, and the flexibility is impressive.

Since this is the first time I've ever cast a silicone mold, I can't really compare it to other products. I can, however, express how pleased I was with the results. I was making a 2-part squish mold of a very thin, highly textured model part reproduction, & the JDiction silicone flowed beautifully around the details & perfectly filled some tricky holes where there was a concern about catching air bubbles. Though I did degas the silicone before pouring, any bubbles that may have been initially trapped by the pour rose to the surface immediately & popped & leveled on their own accord with only a couple of light taps to the side of the mold case. Further, I was pleasantly surprised at how cleanly the first part of the mold separated from the sculptex clay I used to build up the mold -it just peeled away cleanly & with no hassle. Using a very thin brushed-on coat of vaseline as recommended made separating the second part of the mold equally easy. Altogether, the resulting mold was perfect -no bubbles whatsoever, exact surface detail/texture- & after 48 hours with Amazing Clear Cast epoxy resin in a pressure pot, the flexibility of the silicone made separating the textured surface a breeze with no tearing of the mold or distortion of the part even though ACC resin remains very flexible when first demolded. Needless to say, I'm very happy with this product & have no reservations about recommending it to other first time users out there.

Works great takes a while to cure but works great

First I would like to point out the silicone mix is fine. It seemingly does a good job setting up. But my low review score is more directed at the containers, specifically the "safety" cap. In function, it appears to work the same as any typical safety cap for things like medicine and such, simply push down and rotate. However, on the containers I received, over time the mechanism involved stripped and I couldn't get the lids off. In my frustration I gave up and grabbed my trusty box knife to cut the tops off the bottles, and in my haste the box knife slipped and went right into my finger, prompting a quick trip to the ER.I understand the need for safety when it comes to hazardous chemicals and a need for some safety measures to keep curious young kids from hurting themselves, but in this case, the solution was poorly executed and caused frustration that led to a hasty knee-jerk reaction that just caused other safety issues.