HQST 30 Amp 30A PWM Smart Solar Charge Controller 12V/24V Solar Panel Battery Regulator with LCD Display USB Ports (RV,Motorhome, Caravan, Camper or Boat)

Built a small off grid system for my workshop. I used a secondhand solar panel and some free batteries and inverter. I bought this charge controller and have been using it a few months now. Very reliable and does what it is suppose to do. It does seem better built that some of the cheaper ones I have had in the past. The heat sink is substantial and the overall build it good. It charges the batteries well though an MPPT charger would do better here (much more expensive). Only issue i found was I had to get into the settings to enable the load position to work, once that was done I have just left it alone to do its thing. Excellent value at £20 especially as it can handle 30a.

For the price it's well made, has decent wire connectors that take a thicker wire than most. Using with an 80w panel and I have power on my boat for lights water pump etc.

This has a good capacity and is easy to set up. Once the menu structure has been cycled through a few times all the options become clear. It has certainly kept the battery charged through my 4 week absence from home.

The item does the job nicely

Great controller

Terrible the instructions are as clear as mud and the soft wear is appalling over complicated and very difficult to use, unless you are a soft wear engineer don't bother with this nonsense.

So I thought initially this unit was amazing, it had some memory features and the ability to set the battery type.Unfortunately, after about 2 months of use I have concluded its faulty.My solar set up consists of 3x 150W photonic universe panels, and 4x 110Ah Leisure batteries.This unit is unable to surpass 14Amps of charging current, and no matter what I can do it will not go over. I have reduced cable length, taken away and added batteries. All of this has no effect on charging current. I have even tested to see whether the current increases when the batteries need bulk charging. The information also on the display is all fake. It doesn't truly tell you charging status as it cant get my battery bank above 13.15V. Even though the maximum current it has available is in excess of 21Amps.Poor software design and absolutely no point using this is as it cant fully charge anything!! I have had to go back to an old fake mppt 30a charge controller (PWM really).