WEST BAY Sewer Jetter Kit 25 FT for Pressure Washer, 5800 PSI Drain Cleaner Hose 1/4 Inch NPT Corner Rotating and Button Nose Sewer Jetting Nozzle Spanner WatertightTape Pearl Corsage Pin

This item worked really well and appears to be of good quality. We had some slow drains probably to to build up. We could snake drains but they still were slow. We pushed this through with no problem and maybe ran it five times down the sewer drain back and forth. Like the big jets it pulls itself through while cleaning the drain. We could easily go 50 feet. Well worth the money we used a 1300 psi pressure washer and i believed it cleared the drain lines well

Awesome product, does exactly what it says. Has saved me and neighbors well over a grand vs paying someone to come out and snake the downspout and sump pump drains. Using the better tip, it drags itself through the pipe till it hits a clog.If I had to find something wrong with it, it’s that the hose isn’t marked by the foot to see how far you’ve gone. That said, even the high end one my buddy had isn’t marked either.One tip, make sure you insert into pipe before starting water or you’ll get wet.

It's a good self contained kit with all the parts even wrenches, actually bought it to try and clean culverts, haven't gotten to that but will let you know after.So on the good side, have a 3800 psi 2.6 gpm pressure washer. It has cleared three blockages so far. It won't cut tree roots, so that's a whole other thing.The picture shows them putting it down a toilet, you cannot do that don't try. It won't actually make a 90 turn in anything smaller than 4" pipe I've found. If you want to better out from the toilet, you need to pull the toilet off. That's the reason I took a star off, I'm actually looking for a swivel of some sort to try and make those corners.The hose kinks almost constantly unless you string it out, then make big loops to hold it, even then it's easier to just string it out flat. If you put it on a hose real that would work even better. But if the hose was more stiff it wouldn't make the corners it does. I wouldn't try to push with no pressure on it because of how soft it is, if you put pressure to it it will pull itself and the pressure makes the hose stiff enough to push.So outside of the not making corners thing, I'd say it's a great tool. It will not replace an actual plumber, but it can buy you some time before they can perform the larger projects, or help you find where your major blockage is to dig for repairs.

This thing works wonderfully. I have to cut tree roots out of my sewer line every year. I previously bought an expensive power auger from harbor freight which worked okay sometimes but I had a lot of trouble getting around some of the bends in my line and it was really a pain to coil back up properly. Super heavy too. I bought this hydro jetter for a fraction of the price. I’ve used it 3 times already and it pretty much pushed itself through the lines. Much faster than my auger. Lightweight and easy to clean and store. It’s already paid for itself multiple times by not having to call a plumber. Just make sure you have it in the line a few feet before you turn on the high pressure or you will have a mess to clean up. You also may have to buy a longer hose for your pressure washer if your clean out is far from the door, otherwise you’ll be bringing your pressure washer in the house and it will smell like exhaust fumes.

Worked absolutely perfect. I ran it on a 3600 psi 4 gallon per minute pressure washer and didn’t even have it going at full throttle cleaned out some 4 inch lines two snaps up, no regret at all buying it works great

I gave it 3 stars but in the interest of fairness I was trying to unblock a 4" dry well line that was probably unrescueable to begin with. I bought this as a last resort before facing a large repair bill for my septic system. Because it has no on/off valve I initially connected to my pressure washer's wand thinking I could easily trigger the flow. That worked briefly then promptly blew out my pressure washers hose. Thank goodness for Amazon. The head also clog and the pins provided offered some help but it took me about 15 mins to get the obstruction out of the head. I then connected it directly to my PW and it seemed to provide a pressurized stream on the business end of the hose. By the way, the hose easily kinked especially in the hot sun. I would conclude that this might be a good resource for smaller pipes and smaller problems. It was ineffective for my purposes. This was a one-time Hail Mary for me so I doubt I will ever use it again.