OVERTURELuminous Easy PLA Filament 1.75mm, Glow Easy PLA 3D Printer Filament 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer (Glow Blue)

It was a tough choice to decide which of the shimmering colours to go for, and now I want to try them all. Without changing any of the print settings, the resulting models were very smooth, and the layer lines could hardly be seen.

First GID filament that i've used, been quite surprise with a strength of the glow, didn't expect a lot of it but it glows nicely. printed on bambu p1s, easy quick and finish surface mat and nice. it has slight tendency to warp, but the brim has sorted out this issue.

First things first, this stuff glows! And not just a dim, "is it on?" kind of glow. We're talking a proper, sci-fi movie level of luminosity. It's been a hit with my little one (and if I'm honest, with me too). The look of amazement on my baby's face when I showed them a glowing star I printed was priceless.The quality and finish? Top-notch. I've gone through my fair share of filaments that promise the moon and deliver a lump of coal. But this, my friends, is the real deal. The prints come out smooth, with no weird bumps or imperfections. And the glow doesn't diminish the quality of the print either. It's like getting the best of both worlds - quality and fun.Now, let's talk practicality. At 1.75mm, this filament fits like a glove in my printer. No jams, no fuss. Just load it up and watch the magic happen. And with a 1kg spool, you've got enough to experiment with a few projects without the constant worry of running out.But it's not all rainbows and glowing butterflies. The glow effect is brilliant, but it needs a good charge under a light source. So, if you're expecting it to light up like Blackpool Illuminations straight out of the box, you might be a tad disappointed. Charge it under a light for a bit, and you're good to go.Pros:Glows brighter than my future (just kidding, or am I?).Quality of the prints is spot-on, smooth, and professional-looking.Generous 1kg spool, so you don’t run out mid-project.Fits well in most 3D printers with no issues of jamming.Cons:Needs a good light charge to really shine, so a bit of prep work required.Might make you want to print everything in glow-in-the-dark, which, let's face it, isn't practical for everything.All in all, the OVERTURE Luminous Easy PLA Filament is a solid choice for anyone looking to add a bit of glow to their 3D printing projects. It's a hit with kids (and big kids), and the quality is something you can count on. Just remember to charge it up under a light, and you're set for a glowing masterpiece. Happy printing!

The media could not be loaded. I recently ordered the Luminous Easy PLA Glow Orange filament for my 3D printer. While I've observed some positive aspects, there have also been a few challenges in my experience.On the positive side, this filament offers good print quality with minimal issues such as stringing. I also appreciated the fact that the spool was tangle-free, which can be a common concern with some filaments. The glow-in-the-dark effect is a nice touch and adds a unique element to printed objects.However, I did encounter some adhesion issues, particularly with the first layers on the heated bed. I experimented with various settings to find the best printing profile for this filament, but it still presented challenges in terms of adhesion.Additionally, while the glow effect is a nice feature, I found that for it to perform at its best, the printed part needs to be exposed to light for an extended period or directly to UV light. This could be a consideration for those looking for a more immediate glow effect.It's worth noting that the performance of this filament may vary depending on the 3D printer and printing profile used. While it had its challenges, it may work better on other machines with different settings.

I love working with the luminous orange PLA filament from Overture as the prints I've been producing mostly come out perfectly and the only times they haven't have been more down to me and the settings I've been playing with, It doesn't produce quite as good prints if you have the speeds set too high but at lower speeds the print quality is very good. I especially like the luminous glow quality of this filament and you can't really appreciate it until you have a print in the right light. I'd used it as part of some Miss Minutes prints from the Loki series and when I turned on some nearby Nanoleaf lines I was amazed at the colour that was given off. My 6 year daughter loved it so I'm now having to create more prints for her and will also be purchasing some other luminous colours from this brand. Highly recommended,

I normally buy the cheapest filament there is and fiddle with settings until it works. However i haven't printed with PLA for a few years, sticking with ABS,PETG, and TPU for most things. With this I could just use the default PLA settings and it worked a charm, I do print the first layer a few degrees hotter as i feel with the hardened steel nozzle it needs that extra few degrees to really warm up.The shimmer is subtle, in person it is great but hard to show in any photos.Prints were on a long-ish bowden and I had zero problems, no dust, feed, or retraction jams, no grinding or breaks (that i noticed)No tangles and the spool was neatly wound. well sealed and had desiccant inside.Nice that it comes on a cardboard spool, if you are set up to use them, I am not but luckily the cardboard was perfect and strong enough to use on my normal holder.

ORANGE GLOW FILAMENT- prints very well without special settings on my bambu x1c, but the 'glow' thats been in direct sunlight dims as quickly as the sunset, meaning you dont actually see the apparent glowing feature. you only see it i you cup your hands over the part and see it in the dark like that. returned.

Me gusto el color

Overture makes great filament, I've been using their product for quite a while and have yet to have an issue with it!

This has been the best working filament I have used to date with my Creality Ender 3 S1 Pro. I set my printer at 207c extruder and 60c bed temp and the finish, especially on Matte filament is smooth, clean and with little errors. I’ve been very happy with the results

This is the only filament brand I use!

I've been using Ovature filament for a couple of years now. The price and quality can't be beat. The prints I get are perfect and you can't beat the price.