Polymaker PA02037 PolyLite PLA Filament True Black 1.75mm / 3kg Filament PLA hohe Steifigkeit, hohe

I now love PLA+ filaments.

Great high quality filament. I've printed over 120kgs worth of this one. Never an issue with the filament. Hardest part was rigging up something to hold the 5kg rolls!

Been using this bulk filament for a while now and love it.

Honestly, I have yet to find anything to be upset about. I haven't had any clogs or excessive stringing. No warping or anything else. I went from 0.1 to 0.4mm layer height without any issues, and at all heights was able to print from 190c to 235c without issue, and it always stuck firmly to an untreated springsteel flex plate at 60c. It tends to pop right off when it cools to 45c or so, too, so removal is pretty easy. It is worth noting that the surface finish will change from glossy to matte, depending on your temperatures. If I had to nitpick, perhaps sell the bulk spools on a cardboard spool, instead of plastic ones? I found that the best bridge settings for my machine were 0.2mm height, 15mm/s at 225c and 100% flow on a 0.4 nozzle, which lets almost any support easily snap free. It seems to help make large overhangs easier to print as well. Overall, I can almost guarantee you'll have an enjoyable experience with the filament.

I mean, I am blown away by the quality of this film it I have it sitting out in the open for about a week two weeks before I found out that’s not a good idea because of moisture. I’ve been using it now for about a month printed almost 100+ things some of them are failed, the things that have come out are absolutely phenomenal. The quality of this plastic element is superb first prototype pieces and so on.