24 Pieces Dome Light LED Car Interior Bulb Kit Set 194 T10 DE3175 578 31mm 42mm Bulbs Interior Replacement Lights for Car Map License Plate Door Side Marker Cornering Trunk Light - White

The replacement interior lights are excellent. Installation is easy, and the lighting is bright yet soft, creating a modern and pleasant ambiance.They're also excellent quality. Perfect for enhancing your car's interior.

Got this kit for my 2007 Civic SI Coupe, less than 5 minutes to install, provides a nice soothing ambiance to the interior especially at night time.The brightness fits my preference, not too bright or dim

I liked how many I received in the box. So far they look great. I installed them in replacement of the white LEDs the last owner of my truck installed. He did leave the rear cargo light OEM. So the warm LED and the standard festoon bulb, were nearly the same color! Much better than bright white, which looks like a hospital lol. Warm White makes cars look luxurious.The down side is the 168/192 bulbs, are too big. They didn't fit the side marker lights. The solution is small LEDs like the ones the last owner used which are much smaller at the bulb section to fit inside the housing, or just drill the hole slightly bigger in the marker light and it'll fit. So either way, no big deal!Overall very happy with them. I also was able to use the extra bulbs and install them on my girlfriends 2015 CRV EX. They fit so I did two cars for the purchase of one kit. I'm happy!

The lights are clear and bright! No failures during install or current use. So far so good in 100+ degrees or -2. A few units didn’t fit quite right so pay attention during install. And the biggest issue? There are no replacements for the floor board lights in the foot wells and under the seats! So I still have white lights inside my car. The rest of the lights wash it out unless you look for it. I’m a little OCD, so it grates my nerves.

I put these in my 2002 4Runner and they are super bright (but still yellow!). The makeup mirror one is actually too bright. I'm going to have to replace it with the old halogen bulb I took out because it's so bright at night.

Half of them were duds. The brightness isn't that bad, I love the color. They don't seem to get too hot that I've noticed but the back seat lights are very loose fitting, the driver dome lights were slightly big but they work I just had to push really hard to stretch the prongs. The license plate lights are 👍great. Good fit, you can read the plate, cute color. (:

These are ridiculously bright and wonderful. They fit everything I have from GMCs to Toyotas just fine they are bright easy to install but and this is important but; they do have a polarity. So if you install one turn on the switch and if it doesn't light up turn off the switch and just reverse or turn the light bulb around then turn on the switch and it will work. You see some reviews of people saying only half of them work it's because they did not realize that there is a polarity issue with all LEDs. On some of the light dome fixtures you may have to squeeze the clamps together a little bit on your fixture so that the LEDs fit snugly at least I did on the GMC I used the needle nose pliers and just a little discretion then installed the LEDs. They're cheap enough they work beyond expectation they look pretty durable I mean you're not spending a lot of money so you're not out a lot of money I use the pure White version and the color seems very nice very easy to install as well even on license plates lights if you do a little searching for videos on Toyota's there are some tricks that makes it a 5 second install highly recommended wish we would have had these when I was growing up.

These bulbs arrived in good shape and quickly as advertised. I was able to install the clip-in domelight bulbs and they were super-bright and super-white. Great upgrade for illumination in a previously "shadowy" interior.On the downside, the other "non-clip-in" bulbs (I'll call them "pinch-in" bulbs) were more difficult. The original ones in my 2006 Toyota Tundra were almost impossible to get out and even harder to replace. I eventually managed to pull the original ones out after wrapping them in duck tape and wiggling them back and forth from their socket. However, I had to push the replacement bulbs in so firm that the receptacle dislodged from its anchor and I had nothing anymore to push against. I lost a bulb up in the maplight unit cover and thought I'd be happy if I could manage to get the old bulbs back in and working. After getting a pair of needle-nosed pliers to grab the "anchor socket" and keep it in place, my 13-year old son (with smaller hands) was able to push the old bulb back into place. Not what I had hope for....but at least I have light still coming from all sources!The LED clip-in bulbs were much easier to extract and install. They work great and I'm more than satisfied with their brightness. The others may end up going unused. These were $9.99 for a set of 20 bulbs...so a great price for so much brightness. I give these 4 stars because of brightness and the value for so many bulbs. They would easily earn a 5 star rank if the "clip-in" bulbs were easier to replace (at least for my '06 Tundra)! Maybe your vehicle will have all "clip-in" style bulbs...if so, you need these!