4 Pieces Car Wiper Blade Replacement Strip, 32" Rubber Frameless Windshield Wiper Strip, DIY Adjustable Boneless Windscreen Blade Refills, Auto Accessories for Most Vehicle Buses Trucks

No son para nada comptibles con xtrail 2020 y en la descripción dice que si

Like the last one it's identical to my previous purchase just x2 the price, crap and doesn't fit, will not stay in place.

This is NOT a replacement wiper blade assembly, nor is it a replacement insert. It is just the rubbery portion of the insert, the wiper that contacts the glass, so do not discard the old blades and inserts as you will need them. In particular you will have to reuse the metal rails from the old insert that keep the wiper in shape and in place on the blade. No instructions are provided in the package so here goes.Remove the blade from the wiper arm and examine how the insert is held in place. It slides through clips on the blade and its metal rails have a barb at one end that prevent it from sliding through the blade clip at that end. Using needle nose pliers, gently squeeze the barbs together and push the insert through the clip in the outward direction. Once the barb points enter the clip you can pull the insert out of the blade the rest of the way. Take a moment to see how the metal rails fit into the upper channels molded into the wiper. The channels below these are where the wiper slides onto the blade clips. Pull the rail away from the wiper and notice that on the inward facing side of each rail next to the barb there is a smaller barb that sticks into the wiper. Using the old wipers as a template, cut the new ones to length. It may seem counterintuitive, but I found it easier at this point to slide the new wiper through the blade clips BEFORE sliding the metal rails into place. For each rail, beginning with the end opposite the barb, hold it so that the barb faces away from the channel and slide it into its side of the upper channel. When both rails are flush with the end of the wiper, push the insert in the rest of the way until the barbs just emerge on the other side of the end clip.

FIT FINE

It takes a few minutes, but they do work for a fraction of the price.