75mm 4Pin VGA Fan for Gigabyte GV-N98TG1 GAMING-6GD gtx980ti Graphics Card Cooling Fan (0.35A)

The kit came with three fans, a small tube of thermal paste (which is needed because a fan swap on these cards requires removing the heat sink from the circuit board), and a small plastic spatula you can use to spread the thermal paste on the GPU die.The fans come with Gigabyte logo stickers in the center of each one so they help to keep your card looking like an original, though the center of the fans is not an exact duplicate of the 980 TI's original fans. I doubt anybody but an expert would ever even notice the difference, however. unless you held the fans side-by-side with the originals.The fans also come already connected to a triple-fan wiring splitter just like the original which simplifies installation a bit. This is quite welcome as the process of fan swapping is a bit involved. You need to remove the heat sink from the printed circuit board, and then remove the fan shroud from the heat sink before you can swap the fans.Note that you will be needing a small Phillips head screwdriver to perform the swap.

I have a GIGABYTE GeForce GTX 980Ti 6GB WINDFORCE 3X OC EDITION, GV-N98TWF3OC-6GD. These replacement fans were 100% exactly the same as the original stock fans. Same model number, gigabyte stickers, shape, size, and connector cables. The box came with a small tube of thermal paste and a plastic paste spreader, presumably because the connector for the fan on this card is underneath the heatsink. However, I did not need to use the paste or remove my heatsink. I simply unscrewed and unplugged the fans, and installed the replacements while utilizing the existing 3-way fan connector. The set of new fans does come with its own 3-way, but if you already have a graphics card, that connector is already installed, allowing you to simply hot swap the fans.

Works great for my GTX980 Windforce from Gigabyte. One of the fans stopped working so had to replace it. Should mention that the connectors are different for these new fans than the originals so you have to swap out all 3 fans and the included wiring harness. But they work great, look just like the originals without the gigabyte emblem on the hubs.

I bought these to replace the dying/dead fans on my Gigabyte GeForce GTX 980Ti 6GB Windforce 3X OC Edition. Although installation was pretty difficult (no fault of the fans), I have been satisfied with the results, and am glad I chose to repair my card rather than junk it. Came with a small tube of thermal grease for the heatsink.

These are absolutely perfect for the Gigabyte gaming 980Ti card. Be sure to order the .35A version. I had one fan die out and used this to replace it. The only difference is the face of the fan is smooth while the stock ones have a small indent that looks like arrows. If all 3 were replaced no one would tell the difference.

Pleasantly surprised, that these came with the gigabyte logo on them. Intended to only replace 1 fan on my GPU, but these look and sound so good, I'm replacing all 3 together! Definitely would recommend.

had a pair of 980's in sli fan died on card

Was not right for my 970 but yes I made it work.