Polymaker 3kg PETG Filament 1.75mm, Strong PETG 3D Printer Filament Grey - PolyLite PETG 3D Printing Filament, Cost Effective Large Roll PETG 3D Printing Filament for Big Projects

It’s polymaker so it’s nice and consistent with how it prints. But it’s normal PETG so you have to go slow with it. It makes strong parts and the color is pretty close to the image.

I'm a huge preacher of Atomic Filament but I can't always wait for their delivery times. I decided to give this Polymaker PETG a try since Hatchbox and Overture PETG had its drawbacks, and this stuff prints fantastically. Very accurate and it looks great. Minimal stringing and so far no cracks from the things I am putting together (larger sized ball and crescent joints) that the other mentioned brands had.I'll definitely be trying their other filaments and colors.

Bought this for a specific project and was not disappointed. Perfectly wound, little to no stringing, no extruding issues, and zero clogs. I used this filament right out of the bag with no additional drying and had great results.

I had been looking for ESD filament for awhile, but mostly found smaller brands I've had no experience with, and because it's ESD, it's usually rather pricey.Though this is more expensive than regular PETG ($32~ for 500g), it's still a good price, and it prints GREAT. Very pleased with the print quality. It's a very niche filament, but I'd happily buy this stuff again.

I have purchased two spools of PETG filament from Polymaker. One of the two was up to standards and printed well but did need to go at a slower speed for higher quality prints this can be expected of PETG. The other one of the two was on the spool backwards and tangles where present and most importantly lines appeared on the print. However Polymaker support reached out to me and determined there was a batch issue. Polymaker agreed to send me another spool free of charge. It is true that one of the spools had serious issue but they reached out to me and agreed to send out a replacement. There isn't many companies in any industry that do that. This support convinced me to rewrite my review I will post any update I have with the new spool as well.

Date of review: 9-15-24THESE ARE TWO SEPARATE REVIEWS.I am writing another review of Polymaker PETG.What is going on at Polymaker??Now it's the RED PETG! And this was the replacement roll.*see photos*What you see is the red and what happened, and the roll alongside the build plate that was used. The printer photo is my Q1 Pro with a competitor's roll. Same gcode. Different results. MUCH BETTER RESULTS.When I got the Polymaker red, It stayed sealed until I dried it last night., Overnight at 50°C.I bought roll after roll of Polymaker PLA for months with excellent results. And now I have tried black, red & white petg and it's garbage.I can't open every single roll the day I get it just to insure it's quality stuff.Now it's past the return period and I'm stuck with this garbage and 14 parts behind my production schedule. 😡I just want quality stuff. Polymaker is supposed to be quality.I hope someone from Polymaker sees this but I doubt it.Date of review: 6-12-24.For some reason Amazon thinks this is white filament but it's black!I've been using Polymaker brand filament for quite awhile now. AND for a long time I've gotten great results but it seems like since Oct of 2023 the quality has went downhill. Had an issue with tangling on some red PETG I tried to use, (WHICH TO THEIR CREDIT) was replaced but I just an issue with some black filament I bought late last year that cost me over 5 hours on a job.Between prints I store all my Polymaker filament in the bag it comes in with some desiccant packs. It stays in the bag and in the box until I'm ready to dry it before printing.The photos you see are from:1. A roll I purchased late last year and then stored as above.2. After pulling the roll, it got dried at 60degC overnight. That's always worked!Somewhere in that roll there were really BAD SPOTS. Bad adhesion and Lord knows what else. This lack of quality cost me more than $47 in time and material!I know it's well past the window to return for return or refund but if anyone at Polymaker reads this PLEASE get in touch with me. You guys do a great job of fixing issues with your filament and I'd really like this fixed.Thanks.Steve C.

This is an easy to print PETG. No stringing or mess like done other brands. Fits and works perfectly inside the bambu x1c AMS module, too

This review is for the Polymaker PolyLite PETG filament, Red (#de4343), October 2023I am using the PolyLite filament to print the object in the photograph at this very moment. It is performing MUCH better than the Duramic PETG I was using for other projects. So far I have had ZERO blobs on the walls of my print and very minimal stringing at 80mm/s at 235°. In the close-up photo you can see that there was a little problem with layer adhesion in one spot, but turning the fan up to 75% fixed it immediately. You can also see blobs in the interior, but they will be hidden, so I don’t care.Printing directly on glass with a little hair spray to make sure things stay put. The print has been going for nearly 15 hours at the time of the photos. Bed temp is set at 75°, but my bed runs about 5° cool, so it’s actually at 70°.The filament is a bright, deep, and shiny RED. We will have to see how long it holds its deep color.

Purchased a couple rolls of Polymaker filaments on a massive Prime day sale a while back, hadn't gotten around to this roll until just recently.Absolute dream to work with so far, prints smoothly at normal speeds 50-75mm/s, haven't tried it faster yet. Overall the colour and consistency look great, the spool appears to be nicely wound with no tangles thus far (I've encountered a few with other brands, and am happy this doesn't appear to be an issue with Polymaker filaments thus far), prints are all pretty solid and smooth, absolutely no problems with adhesion or removal after printing.Polymaker is fast becoming my go to when I need reliable quality prints even if the price tag is a bit more on the premium side most of the year, it's worth paying a little extra to not have to babysit my prints for tangles and poor adhesion issues I've found in other brands. Makes me wish I stocked up on Prime day.Absolutely will and have purchased again, this time in orange which just arrived today and is just as wonderful as the previous ones.

I've bought the Polymaker PETG several times in various colours and had absolutely no issues printing it on my P1P (with enclosure / fans). Not really much else to say, it works perfectly pretty much with the default settings in the Bambu slicer so I didn't even need to change anything. Drying it will help get better quality but isn't necessary if you use it right after opening.

I don’t know who is rolling these 5 KG spools at Polylite, but it’s not the quality I’ve come to expect. I’ve had three tangles so far with a fresh spool, which have failed prints part way through. I highly recommend printing a respooler and respooling it yourself for safety. Disappointing.

Llegó en buen tiempo.El color es un poco opaco, de buena calidad y fácil de imprimir.

Mit der Auswahl an PETG Herstellern war ich anfangs komplett überfordert. Also habe ich mir die erstbeste Firma zugelegt.Siehe da. Polymaker. Hat SOFORT funktioniert. Kleinere Anpassungen an der Druckgeschwindigkeit und Lüftungseinstellungen und die drucke waren perfekt.Sehr gute Betthaftung, alles bleibt kerzengerade.Sehr gute Layerhaftung, auch bei nicht optimierten Belastungsrichtungen.Gute Temperaturbeständigkeit. Druckteile in meinem Auto (ohne Garage, ganzjährig draußen) haben schon den zweiten Sommer hinter sich und sind nicht verformt.Kaufempfehlung!Bisher gedruckte Filamente:Schwarz, Weiß, Lime, Türkis, Rot