Green 648

Great product that is indistinguishable from the brand name stuff. You get a huge quantity by comparison for a much better price. Used it for screws on red dot optic mounts and nothing has worked loose after being used in service.

This stuff is fantastic, save your money on threadlocker and go with this brand.

I always have a bottle of 243 and 680 on hand and use them all the time on all sorts of stuff that needs attention. Yes, the bottle is supposed to be "half full" , the air space is to prevent it from hardening in the bottle. It is sold by weight, not volume and hardens in the absence of oxygen. The application nozzle is opened by pulling up on the white ring at the base, and useful for preventing accidental spills. Not much fun finding the tipped over bottle somewhere with half the liquid hardened underneath it IFYKYK.... Slightly more viscous than the name brand which I think is nice, so I get a better chance of installing the fastener in difficult locations without it dripping off. Works the same, looks the same, smells the same, and hardens the same, at a fraction of the cost.

Nice alternative to Loctite 638. Grabs quick and holds - had a .007" gap and it filled it, removed wobble, and held tight. Will update later if anything changes, but I intend to use this for many non-threaded fit-ups.

This thread locker seems to work, however I found it a little tricky and did not see any info on how to actually open the bottle ... first there's the main cap, ok just pop that off it is tight at first but simple enough right? well yes and no, as with most you have to pierce the nozzle to get the liquid to flow so I did that and it still was not dispensing any liquid. NOTE: Just in case others are unsure and have the same issue I did then the following info is for you. Then I noticed there's a spot that sticks out lower on the nozzle this is a secondary seal that you must pull up on to unlock it (See Pic), while this is great it would be nice if the info to open the bottle was included in the package. So unless I somehow missed it I did not see any ... Anyway with all that sorted the product works as it should and seems to hold tight and sets quickly, but because of the lack of proper instructions I am docking a star. O and yes as others have mentioned the bottle is half full. I checked the weight of the product and it is around 50g minus the weight of the bottle, so you are getting what they say your getting, its just in a large one size fits all bottle that they must use for all there products which in my opin is just ridiculous and one of the reasons for many bad reviews, they should really just use a smaller bottle for a smaller amount, but because you only use a drop or 2 at a time this amount is still quite a lot, and should still last a very long time. Yes I can recommend this product, as it does seem like a decent value, just know it will come in an oversize bottle, but they are not shorting you on the actual product.

The first thing to understand is that this is non-permanent and designed to prevent breaking smaller threaded parts when removing without heat or impact. It can be messy if you use too much, but that’s on you! The bottle is a good design. Store it upright to prevent leaks. Shake well!

Came fast and as described

Good tube of loctite. I prefer the larger bottles over the smaller tubes. This is thicker than the loctite in the smaller tubes.