Deliver to Philippines
IFor best experience Get the App
Brand | Bevel Engineering |
Item Weight | 1.76 pounds |
Package Dimensions | 8.5 x 6.38 x 4.06 inches |
Item model number | 5824025327 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | BVL-1830 |
M**E
GREAT GOOGLY MOOGLY! HERE IS THE VOLTAGE REGULATOR
On my 2013 ultra, my voltage would only intermittently charge, other times it would drop to11. Found this and ordered it. Shipping was fast and it was well packaged. Install was easy- remove t nuts for the oil coller to move it up out of the way, 2 bolts to remove the regulator and 2 plugs from the back. after install- started and voltage jumped to 15.5! This regulator beats the stock output of 14 or so all to pieces. So, this looks great, works better and is half the price of HD OEM. This is the one you need.
G**W
Perfect fix for a common problem
I was having issues with stock voltage regulator on my 2013 FLHX. It is a common issue for that year, and I believe there was a recall on it, but the previous owner of the bike never took it to the dealer. Since the recall had expired, I did my research and purchased this unit from Bevel. It immediately fixed the issue, and has been flawless for the past few months and several thousand miles. Voltage goes right to, and stay on 14 volts with no fluctuation.Installation is simple, it took about 15 minutes to install, which included disconnecting and reconnecting the battery.
T**D
Bevel Upgraded Rectifier/Regulator on point
Much less in price for the same part without High-Dollar cost. Took me a while to install. I have put over a hundred miles before writing this to ensure the part works correctly without failing. Connections mated right up tot the new part...installed and bolted. whatever electrical problems I was experiencing prior to the new part install are no longer there. New rectifier works as it should. Buy with confidence and know you are buying a quality part for your HD.
R**N
Pure trash!!
The worst quality product I have bought from Amazon. The pictures are of the SECOND Bevel Engineering VRR that I received from Amazon. The first one failed within 10 miles of being installed by allowing voltage to exceed 17 vdc which also burnt out my headlight low beam element and spots. It tested fine at 14.7 vdc when installed. Stator was checked phase to phase for shorts and shorts to ground before installing. All good. I contacted Amazon and an immediate replacement was sent, the unit in the attached pics. That VRR failed 1.5 miles after installation which was first indicated by the acrid odor of burning epoxy, then I noticed charging output at 7vdc. Quickly went home and checked voltage output of stator, within spec per genuine Harley shop manual. Again checked phase to phase and phases to ground, no shorts indicated. Amazon accepted the item for return and literally gave me less than 24 hours to have the burned up one enroute back to them, the other had already been returned. 8 days after this VRR was logged in at the UPS store Amazon issued me a refund MINUS a $16 RESTOCKING FEE! These were two seriously FUBARED items and there is no restocking, as you can see, and it wasn't a simple matter of me not wanting the item. Of course it's impossible to contact Amazon and ask wtf? Bike is now charging fine on aftermarket VRR purchased at a local Indy shop. Very bad Amazon experience!!!
A**R
Installed and is working fine.
I Installed this on a 2015 H D Limited Low. The unit has worked fine.They had fast shipping and everything fit just perfect! Plug and Play!
C**S
Looks OEM seams to be better
This solved my intermittent charging problem on my 2013 roadglide custom. Randomly the bike would stop charging, gauge would drop to 12v and CEL would come on. Bike used to charge at 14-13. Now it charges at 15v at idle. Put 250ish miles on this regulator everything seams legit. The finish on this part looks nicer n smoother than my HD part. I'm very happy with my purchase. my OEM lasted 10k miles. Hope this lasts one longer.*I would like to add I tested my stator and other electrical parts to isolate my OEM regulator to be the problem. If this doesn't fix ur voltage problem or goes out prematurely. Be sure to check everything else out
B**S
Recommend this Regulator!
Thus far the regulator has worked great—we put it on, charged it overnight and ridden the bike on 2 runs both of which went great with the volt meter showing a steady 14 volts-The cost was good and delivery fast with Amazon Prime. I would recommend it without hesitation at this time. Very easy to install and we did it right in my friends driveway.
D**E
Not steady
The media could not be loaded. Didn't work for me voltage not a consent 14.5 volts
Trustpilot
2 days ago
1 week ago