Thermal Grizzly AM5 Contact Sealing Frame - Contact Frame & CPU Guard Combination - Optimizes Contact Pressure Points & Protects Components - for AMD Ryzen 7000 CPUs - Including Aeronaut 1g

I installed the Thermal Grizzly AM5 Contact Frame on my Ryzen 9 7900X3D system with a Corsair H150i AIO and Arctic MX-6 thermal paste, and the results were better than expected. Before the upgrade, my CPU would peak at around 73°C during OCCT stress testing. After installing the contact frame and reapplying thermal paste, my max temperatures dropped to 67°C — a solid 5–6°C improvement under full load. The system now runs cooler, more stable, and with less thermal fluctuation during intense gaming and productivity tasks. I also noticed a slight drop in GPU temps during 4K benchmarks, likely due to better overall case thermals now that the CPU heat is dissipated more efficiently. Build quality is top-notch, installation was straightforward (just follow the instructions and be patient), and everything fit perfectly with my AIO. If you're using an AM5 CPU and want the most efficient and even pressure on your IHS, this frame is 100% worth it. Highly recommended for anyone running a Ryzen 7000 series chip with high-end cooling — especially if you’re aiming for long-term thermal efficiency and stability.

The Thermal Grizzly AM5 Contact Sealing Frame is genuinely impressive. Installation was straightforward, and the build quality feels premium the moment you handle it. Once in place, it made a clear difference more even pressure, better contact, and also improves performance and overall functionality with more stable temps on my Ryzen 7000 setup. I also like that it adds a layer of protection around the CPU, which gives some peace of mind during installs. If you want to get the best performance out of your AM5 system, this frame is absolutely worth it.

Perfect fit and easy to install

Used this product with Grizzly's Phase Change Thermal Pad and it has been great. With the odd shape of the AM5 CPU's, trying to get a good cover of the CPU in Thermal Paste or Cutting the Thermal Pads in a good and secure size has been a pain. With this product having a bit of a Sealing ability, I did not have to worry about it as much. This has helped keep my PC much cooler and so far has not spilled anything or should say nothing has seeped into the CPU area. The installation may seem a bit overwhelming to anyone who has never changed out any of the brackets, whether for the CPU or the Heatsink, but it is quite easy, just make sure to do the Cross tightening method (Top left, Bottom Right, Top Right, Bottom Left and then back over each in a repeating pattern until all mounting screws are tightened). I do Recommend this for anyone with a AM5 CPU at the very least.

The Thermal Grizzly AM5 Contact Sealing Frame is one of the better upgrades you can add to an AM5 setup. It replaces the stock SAM bracket and gives the CPU a more even, optimized pressure profile, which helps with cooler contact and keeps paste from spilling into the gaps around the IHS. The silicone inlay is a nice touch — it protects the exposed components around the Ryzen 7000 series CPUs and makes the whole mount feel more secure. Installation is straightforward, and the anodized aluminum frame feels premium. Once installed, the cooler mounts cleanly using the original AM5 backplate, and everything seats firmly. For the price (usually around $17–$20 depending on the seller), it’s a strong value considering the build quality and the improvement in mounting consistency. Overall, a well‑made, worthwhile upgrade for any AM5 build that gives cleaner pressure, better protection, and a more reliable mount.

Got these just to ensure my build has the best possible components (i don't recall any bending issues for AMD but while it may not be needed, it is prudent to have). Using it with an msi x870e board with a 9950x3d and don't really know if it helps with cooling (using a corsair 420 titan..I live in Fiji and currently the weather is quite hot (not hot like Australia, that's crazy but still pretty hot and humid). After doing some under volting (yes per ccd) idle temps are 47-50 and load temps haven't crossed 81 degrees celcius (so far well used Aida64 and cinebench). I like Debauer and TG products overall (use their paste too the kryonaut extreme pink paste) and TG hasn't failed me yet. Would buy again..and again and again for as many builds I build but alas, it seems like the little guy (us all) cannot do little guy stuff at this time (since we have little guy money and prices are uppity now). Anyway, so long and thanks for all the fish. Vinaka TG and Amazon.

First is this nicer than other Anodized IHS-ILM replacement kits? Yes! Is it worth 10-15$ more? Possibly because the paste you get is good for a few uses and is top tier paste with plenty of testing. You get the thermal pad that are hard to come bye and can cost 7-12$ themselves. You get 2$ in paste, a slightly better than "generic" AM5 ILM replacement, and $8 the thermal pad which are a pain to get. Which in individually would be $20-$30 purchased individually anyway.

If you’ve ever looked at the exposed capacitors around an AM5 heatspreader and felt your soul leave your body at the thought of paste oozing into them, Roman "der8auer" Hartung built this anodized aluminum life raft specifically for you. The Thermal Grizzly AM5 Contact Sealing Frame isn't going to turn your air cooler into liquid nitrogen, but it will keep you from needing a toothbrush and 99% isopropyl alcohol later. Pros: * Zero-Goo Zone: The included silicone gasket seals off all those weird little cutouts around the Ryzen heatspreader. Paste stays where it belongs, keeping the delicate surface-mount components pristine. * Even Pressure: Replaces the stock AMD latch to spread mounting pressure evenly across the socket. * Build Quality: Precision-milled, clean finish, and fits like a glove. Cons: * Don't Expect Miracles: Unlike Intel's LGA1700 frames that fix massive socket-bending thermal throttling, AM5 doesn't warp much under stock tension. You might drop 1°C–2°C if you're lucky, but you're buying peace of mind here, not record-breaking temps. * Sweaty Palms Install: You have to remove the factory socket latch entirely. Keep steady hands with that screwdriver—dropping it into those fragile motherboard socket pins is a quick way to turn your rig into a very expensive paperweight. Bottom Line: If you swap coolers often or use runny thermal paste (or liquid metal), this is the best $30 insurance policy you can buy for your CPU. Worth every penny for the stress reduction alone!

Ich habe den Contact Sealing Frame zusammen mit meinem Ryzen 7 9800X3D verbaut und bin absolut zufrieden. Für mich ein kleines, aber extrem sinnvolles Upgrade für diese CPU. Montage: Das Anbringen ist dank der präzisen Passform absolut einfach und unkompliziert. Der Rahmen passt perfekt auf den Sockel und umschließt den Prozessor haargenau. Funktion: Er dichtet die markanten Zwischenräume des AM5-Heatspreaders perfekt ab. Bei einer High-End-CPU wie dem 9800X3D läuft so keine überschüssige Wärmeleitpaste mehr in die Ecken, was das Reinigen beim nächsten Kühlerwechsel enorm erleichtert. Zudem sorgt er für einen optimalen, gleichmäßigen Anpressdruck des CPU-Kühlers. Fazit: Ein kleines Teil mit großer Wirkung. Schützt die wertvolle CPU, erleichtert die Wartung und lässt sich kinderleicht montieren. Eine klare Empfehlung für jeden AM5-Builder!

付属のパッキンを使用すれば液体金属グリスにも対応します。また他の方が仰っていた通り他社のコンタクトフレームに比べてロープロファイルなため、am5純銅グリスガード金具を2枚追加で噛ませる事が可能です(意味が有るかはさておき)

J’ai acheté le Thermal Grizzly AM5 Contact & Sealing Frame pour sécuriser et optimiser le montage de mon processeur AM5, et il fait parfaitement son travail. 🔧 Installation : • Le montage est simple si on prend son temps et qu’on suit bien les instructions. • Le frame remplace le système de rétention d’origine et s’installe sans difficulté particulière. • Une fois en place, le CPU est bien maintenu et correctement aligné. ❄️ Fonctionnement & efficacité : • Le contact avec le refroidissement est uniforme, ce qui permet une bonne dissipation thermique. • Aucune anomalie depuis l’installation : le système est stable et fonctionne parfaitement. • Le joint d’étanchéité joue bien son rôle et rassure lors de l’application de la pâte thermique (pas de débordement autour du socket). 🛠️ Qualité de fabrication : • Produit très bien fini, matériaux de qualité, fidèle à la réputation de Thermal Grizzly. • Le frame est solide et inspire confiance sur le long terme. ⚠️ À savoir : • Il faut être à l’aise avec le démontage du système de rétention d’origine (à faire doucement). • Bien respecter le couple de serrage pour éviter toute contrainte inutile. 📌 Conclusion : Un excellent accessoire pour les plateformes AM5, bien conçu et efficace. Il apporte une vraie tranquillité d’esprit lors du montage et contribue à un bon contact thermique. Je le recommande à ceux qui veulent optimiser et sécuriser leur installation.

Love this product the fit is just right and the additional gasket helps me be sure if I end up going with liquid metal i won't get any shorts in the future. The finish on the product is premium, and coming from the theralright version I do again appreciate the gasket for peace of mind and availability to use the other TIM if I ever get to it. GREAT PRODUCT!

Excellent fit and build quality—it makes thermal paste application neat and hassle-free on the 9800X3D, which alone makes it totally worth it. No temp diff as everyone already knows.