20W Wireless Charging Pad fit for Ford Bronco 2021 2022 2023 2024 2025 2/4-Door Console Wireless Charger Fit for Bronco Accessories Metal Heat Dissipation Without Noise

The instructions are certainly lackluster but it was so easy to install I was shocked! I was done in 15 minutes and had zero issues. Note this won't work on base models and I can only assume the "dumby pad" isn't present requiring you to cut a hole in the plastic console. Turn vehicle to accessory, put in neutral and put parking brake on prior to beginning disassembly.Here are the steps I followed:1. Remove grab handle with torx bit provided in factory tool kit2. Using the provided plastic tool pop the platis trim from the forward side of console, 4 anchor point3. Using provided platic tool pop console top by taking tool around perimeter4. Once all plastic anchors have been removed, simply pull console cover towards back of behicle and rotate clockwise5. Disconnect the two usb poer cords from inside console allowing you to rotate and lift console cover enough to access dumby plate mount6. Using a torx driver remove the four mounting screws from dumby pad7. Insert charging base into mounting area and secure with torx screws removed in step six8. Plug in wiring harness adapter to console9. Plug harness wire to added harness adapter10. Plug USB connector back into console11. Install console cover and trim12. Install grab handle13. Place rubber mat around charger in the consoleThat's it!!!! Super easy and absolutely no issues. With 20W charging ability it charged my phone quickly. I love not needing to have cables attached for communication or charging and love the ability to have passenger charge with a cable while I use the charging pad, Great product and don't make it harder than it needs to be because it couldn't be simpler!

Fast charging. Can get a little hot but has been working fine for over a month now and I have no problems.

I had it working and then went to snap the console back in. Upon doing that it would not work. A plastic piece broke off and I managed to piece it back together. I hope it holds. Was really careful about snapping in the console. I hope it holds and continues to work. Be careful.

Ordered this item because it appears perfect. It likely is. However the box is sealed with a magnet and it ships in that box. Apparently while making it's way through the mail (it is shipped via USPS) the box inevitably opened and I received an empty box. I'll never know if it was good or not. Now it's out of stock so I have to buy another brand. Thanks for taking such care in shipping. Garbage....

Overall this charger gets the job done. I have a 2022 Big Bend Bronco 4 Door. Installation is not the easiest thing and I would stay takes a decent amount of skill to get done. Overall I would stay that it took me an hour or so to install. Once installed, the charger worked very well and got my iPhone charger quickly. My only issue is the fact that the phone moves around a lot when you are drive and moves out of position to charger. Aside from that, I would recommend this charger for Bronco owners.

I like having a charger sans cables. This does the job. A couple things, during install, putting in neutral and removing shift knob make the space easier to access. At first, I was reluctant to remove knob. It’s just two screws. The 90 degree elbow connector was difficult to disengage and felt like it was a compression fitting. Actually, almost sent back after I could not get connector to disengage after numerous attempts. But, perseverance paid off. You can see connector in the one pic. Also, when you replace knob it is helpful to have another set of hands to hold knob down. I’d start the job earlier in the day in case you need to walk away from it for a bit😂.

The media could not be loaded. I have an Everglades and it didn't come with wireless charging. This is a good stock looking alternative to the factory one. There are others out there that require drilling, but this one does not. The install was pretty easy. Overall, it took me about 30 minutes. The instructions to remove the middle panel could have been written a lot better with more details, but i guess that's what youtube is for. I ended up following a youtube video that puts the shifter in neutral that will allow you to turn the middle panel and not have to disconnect and unscrew the shifter knob. I like the stock look of this charger. i also put the original rubber mat back on and it charged through it. I just installed it today and haven't really tested it longterm for heat build up, but will report back if i notice any abnormal heat coming from the charging pad. All in all, I'm pretty satisfied with the way it turned out.

The media could not be loaded. Installation was easy and plugs into existing vehicle harness under the console. Tested with several new and older Android phones and works great. It even charges through my leather Bronco logo cover piece that goes over that spot. My new Samsung Zflip 5 does need to be in the folded position to charge but can still see the front display fine.