BESTSIGHT Scope Mount Cantilever Picatinny Mount 30mm &1 inch Cantilever Scope Mount

I'm really impressed by this scope mount, especially considering the dirt-cheap price point. All of the YouTubers say to invest in good quality scope mounts, but I risked it with this and have been pleasantly surprised. I used it to mount a scope to my flat top AR-15. It's hard to believe that this is only $15ish. The offset is really handy in getting the scope in the correct position for proper eye relief. It's rock solid, almost to the point of being over-built. I can't imagine anything short of drop testing it from 20' could damage this thing, so I feel confident in saying that most people don't need anything more solid. The only drawback is that it is so bulky. If size and weight are no concern, then you're good. I tried to mount a little red dot to the top, but honestly it just wasn't a good setup (can't get a cheek weld, the dot hangs off the rails, the rifle is then super tall), so ultimately the rails just add unnecessary bulk and weight. There are no weight-saving measures taken, no cutouts or anything like that, so it is fairly heavy. With six screws on each ring, you really don't have to worry about this thing coming loose, but it seems like overkill for sure. Overall, extremely sturdy and durable, but bulky and heavy. Very good for the price, that's for sure.

This cantilever mount was just what I needed to get the correct eye relief on a 3x9 scope mounted on a 10/22. Great price and installed easily. I was initially worried about the effectiveness of the plastic sleeves needed to convert from 30mm tube to 1”, but they worked flawlessly. I also liked that the mount is slightly raised so I can see the front sight under the scope, which helps with initial point of aim.

Works like it should. A++

1. Mount gives you the flexibility to mount to your rifle or carbine either way depending on your rifle and/or eye relief because of the cantilever design.2. Ring tops, screws and screw holes are mated. Do not mixed up the tops, screws and screw holes or you will have resistant when you screw the screws back into the screw holes.3. Scope ring inserts allows you to fit 25.4 mm (1 inch) body tube rifle scopes.4. No Locite is needed because the ring tops and screw holes are pitched. Hand tighten only.5. Scope mount with two round buttons for easy detach. Always mount with the two round buttons and two round bars into the rear of your picatinny rail slots. Why? If you mount the scope mount forward inside a slot, the gun recoil will move the scope mount. This effects zeroing and hitting your target.

I bought this optic for a scope i had recently purchased and needed a mount for. This mount works perfectly as advertised and is quite well made. The quick detach makes taking it off and putting it on to a rail easy as pie, but to attach the scope itself onto the mount takes a bit longer and while it is quite sturdy, i wouldn't recommend using this for optics you will be changing mounts for often. The addition of picatinny rail on the top of the mount is a nice touch and allows for mounting of any other additional accessories you might need. All in all, this is a solid purchase for the price, and i doubt it will let you down when you need it most.

Seems ok so far. Just replaced my scope on my AR15 and my old scope had a built in Mount with rails on top and each side so got used to having a red dot on top my scope. So bought this because I wanted a one piece mount with top picatinny rails. And so far working great, no wiggle, fits my scope and rail nicely and my red dot. Overall happy especially being affordable.

Does what it's made to do very well. Good quality.

Decent quality and mounts up well. Has held firm on my 300 blackout AR build even with 3 of the screws stripping the threads out of their mounting holes. With 12 screws I am not too concerned. The price made it worth the sacrifice for the inexpensive build I was going for.