1/2" Motorized Ball Valve Stainless Steel Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup

The valve works great! I'm using it in an automatic sprinkler system for watering my garden. System basic parts are the valve, soil moisture sensor, battery, Auduino and a solar panel.When the valve is activated by 12 volts DC it requires about 0.5 amps to have it open. Once the valve is open it only requires 10 mA to keep it open. Once power is removed from the valve it closes on its own.Great motorized valve!

It’s working so far. Let’s see how long it will last. I’ve tried two diaphragm solenoid valves and neither lasted more than a week. Hopefully the ball valve will work without plugging. Using for a drain on a stainer on a lake irrigation system.

Can be added as a station on a 24v irrigation timer. Will shut off automatically when timer expires. Good for use on low pressure high flow setup where a diaphragm valve will not work.

I am using this valve to replace the manual valve to fill my pool. I am using one zone of my sprinklers to activate the valve from my phone. It works perfect. I set the zone to 30 min - 1 hour and forget about it. I could also use a mechanical water level valve; perhaps would be cheaper but I decided to go this route and I am a happy camper

It’s been what a year since I requested this product and I’ve been so behind on installation in my recirculating shower system. I’m using this to stop the flow from my fresh water tank so the shower operates on filtered and sterilized water at the touch of a switch. The only hassle was ordering the right fitting to connect to pex since this is meant for other plumbing material. But that’s just me using things for alternate purposes. No leaks, and it works. Low cost for other interested in a similar product