BIQUPanda Lux, Led Light Strip Upgrade Kit for Bambu-Lab P1S P1P X1C X1E 3D Printers, 5V 0.3A LED Light Bar, Magnetic Installation

This is a much needed upgrade for anyone that has a Bambu Lab P1S printer.the Big Q Panda Lux light is a Great value and a good price for this definate upgrade, it has made a huge upgrade with the lighing...really notecable when you view your prints through the app, this is where is "shines."Total "night and day" and is super easy to install and easy to use.I have had for a couple months now and it works great with no issues...build quality seems good and it fits nice and neat tucket away where no one will notice it.The product is specifically designed for the P1S and it shows...no regret with this purchase, very happy with it.

This is a must have for any Bambu Printer owner! Very bright and pretty easy to install despite some of the available instructions. Takes about 3 minutes to compete. The lights have the exact amount of wire needed to plug in and not have to deal with excess in the printer and attached magnetically. Super simple. The confusing part is the maker includes parts that are not used and no explanation of what they are for. Highly recommended. I am attaching a photo of 2 of printers 1 with and 1 without the light bar. The second bar was installed 3 minutes later.

First order arrived with a empty tube sleeve, amazon came through with a replacement. Included is a URL for install but I found a quick youtube video for clearer instructions. Super easy to install. Much better lighting, but not as bright as I was "wanting". You cannot keep the Bambu LED plugged in, which will cause issues, according to the video/instructions, FYI.

I'll start by saying, this led IS an improvement from the stock one on my X1C. But, not by much. This BIQU led is a great design. The aluminum housing is really nice. Its triangle shape allows it to mount on the front horizontal metal frame of the printer. Leaving just enough room for the toolhead to still be able to home in the front right of the printer without a collision. I was skeptical that there was enough room for this led to mount and be out of the way of the toolhead, but it is. It comes with some powerful magnets pre-installed on the led housing. They hold great, but it also comes with adhesive tabs for extra measure. I used the adhesive tabs, just to be safe.For the Cons and simple improvements that would make this led almost perfect out of the box. The led's aluminum housing comes with some 3d printed end caps installed on it. They are NOT the exact size of the aluminum housing. Not a huge deal, but if you are using the supplied 2-sided adhesive tabs (which you should), the 3d printed end caps being slightly larger than the aluminum housing, caused the adhesive tabs to not stick. The adhesive tabs are so thin, that the plastic endcaps held the housing off of the frame JUST enough that the adhesive wasn't touching the metal, to stick to it. I took a razor blade and carefully sliced a .5mm amount of material off the plastic endcaps, so the aluminum housing would sit completely flat and this made the adhesive tabs stick.Next, (this is the worst part) the led comes with an extra length of wire and a pcb coupling. This I assume is so it can work with the P1P, P1s, and X1c and accommodate the different layouts of the printers electronics. IF THEY HAD just made the wire and connector coming out of the led a little longer, you wouldn't even need the extra wire and redundant pcb coupling. I feel they only had a P1P to test this on, because with the X1c, where the stock light plugs in is different than the P1P. There was no spot to hide the pcb coupling behind the plastic housing of the printer's connections (above the camera). The wire being too short makes it an unnecessary install, if they had just made the wire longer, the install would be so much better and cleaner. Lastly, the new led is more of a 6000k led (bluer). It would be better if it was closer to the stock color (4000k-5000k whiter). It would be brighter. This is merely a preference, though. Also, since this new led is mounted above the hotend (unlike the stock being more inline with the hotend), there is always a shadow from the toolhead. This prevents any light from shining on the nozzle tip (if you want to see if anything is stuck to the nozzle). The stock led does a better job of lighting up right under the toolhead. The NEW led does a better job of lighting up move of the interior of the printer (primarily the front of the printer).Overall, I'm happy with the purchase and the results. I wish you could use both the stock led and new. Though, this is minor. The biggest issue, which would be a simple fix is MAKE THE WIRE LONGER OUT OF THE LED so you don't have to use the pcb coupling!Cheers!

I thought the factory light was good enough. I was absolutely wrong. This light illuminates the entire plate and for the price, it makes it a no brainer. Installation was quick, and just incase you miss it in the instructions. DO NOT hook up both lights, running both lights is over the amperage that it is designed to run. The upgraded light is plenty.

I didn't realize until I received my printer just how weak the stock light is. Timelapses were practically pointless with it.But for less than the cost of a spool of filament, this light illuminates the entire build plate beautifully. Cliched, but it really is like night and day.The installation process is a little tricky just due to weird angles, but nothing too difficult for someone used to working with 3D printers - maybe ten to fifteen minutes total.

This light was one of the first accessories/upgrades I ordered for my new Bambu X1C. The factory chamber light is not very helpful at all, so this light at such a low price for a quality build and easy install is a no brainer. The total install time was only about 5 minutes at most and my printer was back in business. I am really a fan of the magnetic connection because after installing it, I did end up needing to slide the light further to one side to get it out of the frame of the chamber camera which improved the camera exposure. I would highly recommend this as an upgrade for the X1C or P1S.