Toolwiz 3/8'' Universal Low Profile Tool + 1/2'' Inner Tie Rod Hex Wrench

Handy tool, got me out of a scrap. Make sure its fitted correctly before use otherwise it will slip and shear grips

Worked as intended, made an impossible job very easy. Make sure you degrease the old inner tie rod before using.

Perfectly usable if you’re only planning to do one to several tie rods. However, you must have plenty of extension bars handy to get clearance of the wheel arches if you want to free a tight inner rod. Must be tightly attached, and the teeth deform quickly. Check you have clearance to access the drive. Be extremely careful not to apply off-axis force to the steering rack; in our case we supported the head of the breaker bar when twisting to ensure the force was rotational rather than shearing or bending. We attached the tool to the 30mm hex on the inner tie rod where it connects to the steering rack, and it fit well. I recommend looking at the tube-style tie rod removal tools as an easier, more secure alternative. The first time using this tool was quite frustrating, as it was initially slipping and didn’t feel like a comfortable job until we had an established system for the second inner tie rod and secured the nuts tightly. That said, for the price, it’s a handy tool and will help you save money doing the job at home if you’re not looking to use it often. It's sturdy enough and the build quality is sufficient for its purpose for the odd job.

Very good product

Absolute piece of junk. Doesn't grip well at all. Very awkward to use.

Quite fiddly but did do the job. Removal wasn't easy but was able to get the tie rod off using the tool. I would suggest using an adjustable wrench if space allows. Build quality was good. Good to keep in the tool chest for future.

Perfect did the job

Worked good. as others advised, I’ve used a zip tie to hold it snug.Good value for money

軽自動車で使用。 レビューでダメみたいな事を見ましたが、硬くしまっていたラックエンドが滑らず外れました。ちょっと噛み込ませるポイントを見つけるとズレないです。 使用後の山もしっかり残っており何度も使えそうです。(機会は少ないが)

This definitely requires getting it into place and tightening the nuts every time you need to turn the tie rod, but this works like a charm without any quality issues. My tie rods were really tight and a normal tube-style extractor would not work. I required this and an extra extra long set of wrenches to get it off. It must have required at least 200 lb ft of force to get it off and it worked! After all was set and done, I did not see any visible marks that the metal was warping or any issues with the materials at all. I also did not have any issues getting this tool into place, although I did have to loosen it about twice every 20 degrees or so until i could loosen it by hand. Overall good little tool that I hopefully do not have to use for at least another 200K miles.

Ottimo prodotto

Ideal para soltar las axiales de dirección,se agarra muy bien.

Goede spul