[3M]-5pcs(Pro) Customized Car Door Handle Cup Protector Made with 3M PPF

Outstanding product. 3M “200” grade film grade is perfect thickness. Edges are cut perfectly. Key to install success is using slip solution, a light touch with central to perimeter squeegeeing . Here is how I did it: Make a DIY slip solution (12oz distilled water with 20 drops of dawn in a spray bottle). Wear new nitrile gloves. Clean paint surfaces with rubbing alcohol and a lint free cloth. Spray copious slip solution on paint surface and your gloves/fingers. Peel off film and spray copious slip solution on the adhesive side of the film. Gently place soapy film on soapy paint surface and position it symmetrically. I made a deliberate visual reference to position the film where I assessed it would best protect the paint from nails and rings. With an index finger, lightly press and squeegee from the center to the top central edge and repeat evenly left and right of center while ensuring the film stays centered. You’ll notice the film start adhering as you squeegee more slip solution from under the film. Continue on the lower half, always starting from the center. Finishing squeegeeing with more pressure using a microfiber cloth - again always from the center towards the edges. A head lamp with help you see soap under the film which will guide your squeegeeing efforts. Once the film is all clear of cloudy soap, you’re done! It’ll look like a pro did it.

Like these. They do what they're supposed to do. Protect the paint in the door handle cup areas. Cut mine with scissors for a custom fit Worked great. Work them slowly from one side to the other to remove any trapped air bubbles. Look just like factory-installed.

It's not that simple like peel and stick on. I had to use a spray bottle of water (and used bottled water to prevent residue) and a hair dryer. It took about 45 minutes to get all 4 doors. If you have done film wrapping before, you probably will get it done much faster. The key is patient and spraying a lot of water on the film (both the sticky back and the front) and the surface behind the handle. Remember to clean the area well before put the film on too. I started from the top of the film first to see if it is aligned before going to the middle. When I got to the bottom part, it got wrinkled. I had to lift the film up, sprayed more water, and used hair dryer to stretch the film out. Sometimes, I have to repeat a couple times to remove all the wrinkles. It took me about 15 minutes on the first one. Then, it took about 10 minutes for each of the rest 3 doors.

These do exactly as advertised and pretty easy to install. As others said, they seem not to stick that well, so it’s challenging to get them to lay down and stay dow. However just add some heat from a hair dryer and makes them very sticky. Take you time and these will save you from paying $200 at a shop.

I don't recommend it, don't adhere well.

I’ve had these on my car for over a year and not one of these has started to peel. I drive a luxury car and was nervous that the kids would scratch the handles but I haven’t had not one problem yet. They arrived as the were advertised and the adhesive is durable and they were easy to install.

Very difficult to install. Haven't figured out how to spray water on both the paint AND the film and then ensuring that no excess water remains. It's not like window tint film where you can use a squegee on a flat surface. Somehow you have to get your finger(s) behind the handle and drag your finger towards the edge acting as a squegee, all the while making sure it doesn't slide or move. Would not recommend this as a DIY project. Would be difficult enough if there was no door handle. With one it's close to impossible.

Get a spray bottle with soap and water and spray the area first along with the back of product. Once you get the product in position, just gently wipe away the soap and water!

Product received as described and in perfect condition. Works perfectly

Buen producto, fácil de instalar

Cost more than the rest but was worth the price for quality

sticks real well , nice clean edges

Comme dans la publicité