BlueRigger Digital Optical Audio Splitter 1x2 - Active Toslink Splitter 1 in 2 Out, SPDIF, Fiber Optic Audio Adapter for Home Theatre, Xbox, PS5/PS4, DVD, Receiver, HDTV

I had an optical feed coming from my music centre and needed to split it - one feed to my studio speakers, one to my surround system and one to a bluetooth splitter. This did the job perfectly. There is no loss of volume, the digital signal didn't degrade and no noise was introduced. It is as easy to use as you could hope - plug the input (ToSLink fibre optic) cable into one socket, and the output cables into the others. It needs a power socket to be available as the digital stream needs enhancing. There is a red LED to indicate power is on, but it is not too bright. Other than that, it does what it says on the tin - turns one optical stream into three. The manufacturing quality is excellent, the price is well worth it. The power cable has a decent length. Mine has been running for nine months without a single hiccup. Highly recommended.

Works great and easy to setup. Plug cases in and switch on and if by magic, one audio in, two audio out. Just be aware that you only get the splitter unit and the USB power lead. Toslink leads need to be purchased separately. I purchased this to split the TV's optical audio output that feeds a sound bar to also feed audio to a Phonaks TV Connector which link to my Phonak hearing aids.

Great product, well built and works a treat. It sounds very simple, just plug it in as required and off you go but many complain that only one output works as did mine. However a bit of research showed that optical/spdif input to some devices can be tricky and is dependant on the initial sourse. In my case the sourse was a new Samsung tv, 2024 model. They have put only one sound output on this (and other!) sets, a digital optical only. There is no headphone output on the tv at all and none on their very expensive soundbar either. If sound volume was rated 0-100 my better half would need about 30, me around 90 so I needed headphones and I needed them to work at the same time as the soundbar. The soundbar worked fine on a single optical cable direct from the tv. When I fitted this splitter and a new cable ther was no change, worked fine. My Sennheiser wireless headphones had no digital input so I had to fit a digital to analogue converter to the second splitter outlet first. Didn't work, at all. To rule out the splitter I plugged the soundbar into the second splitter outlet and again it worked fine in both. In the end it was the tv. Some devices, like my headphones, will only work with a standard stereo (PCM) input. Modern TV's default though is a Dolby stereo which just does not work with some devices but some soundbars work with both. In tv (or device) settings, sound mode, change this from Dolby to PCM and job is done. Headphones now work fine. Hope this helps.

Worked well for me, I use it to split the optical audio from my TV to drive my sound bar and a Bluetooth transmitter that connects to hearing aids.

Small, compact dose the job. Didn’t know it came with a remote, unfortunately the remote doesn’t work

Good quality, good price 👍

Worked straight out of the box. Just plug and play

Great piece of kit. Does as it says

Fonctionne parfaitement

Connected to my Vizio sound bar and wifi earphones and works great!

Es bueno y buen material le doy 4 estrellas por tiene de repente un pequeño chisquidito muy leve pero pues me funciono del precio muy bien y el envío muy rápido gracias

does not work as supposed

ممتاز وفعال