Ringke Onyx [Compatible with MagSafe] Designed for Google Pixel 9 Pro Case, Anti-Fingerprint Technology Prevents Oily Smudges Non-Slip Enhanced Grip Precise Cutouts for Camera - Magnetic Dark Green

I own both the regular case and the magsafe. I also owned and discovered this case for the Google pixel 8 pro. I previously had an Athlex, which is also a fantastic grippy case. What I liked about this one is that it has the same type of grippy nature but even more sleek, Slim and perfectly fit to the Google pixel 8 pro and the Google pixel 9 pro and XL model. The case is thin enough to be comfortable yet thick enough to provide adequate protection. It does a slightly better job than the other case I mentioned with regard to screen protectors, all of which I've been able to apply perfectly without them peeling up due to the case. The molding around the camera bar is the best I have seen and I can't understand why other manufacturers don't do the same. Perhaps they're worried that the cutouts won't match properly, but mine have in every single case I have purchased from Ringke. The onyx has become the standard case for my family and everyone loves it. For the reasons I mentioned. There is grippy texture on the side that makes a tremendous difference from the Torras cases and Spigen, that makes the whole difference. It's designed that way so it's not smooth. However, it's only slightly recessed so there's plenty of comfortable grip that it provides over just plain rubber. There's more camera protection here than any other phone I've seen, with. Perhaps an extra millimeter around the camera in the back. On the front, the top and bottom are slightly higher than the middle of the phone. Magsafe works perfectly. I didn't like using it before but now with this case, being sleek as it is, I sometimes use it for car mounts and stands, being able to stick it on the back whenever I want. It is definitely strong enough to hold the phone and has never been an issue.

I'm pleasantly surprised with how good this case is. It does an EXCELLENT job of not being super bulky but also offering full protection. I don't think it's considered a slim case, but it feels minimal. The Pixelsnap accessories work without issue and snap to the magnets without issue. Works just fine with wireless charging on the pixel stand. Grip is pretty decent, I wish the back was slightly more grip but it's not slick and doesn't slide off my leg or something similar. I was convinced this would be a case I would throw in a drawer and never look at again like most. But I like this case and highly recommend it. I'm even coming from one of those ultra thin snap on minimal cases.

[I bought 3 cases: this Ringke, a Torras, and Spigen rugged armor. All are good cases and if I hadn't done a side by side I'd probably be happy with any.] The Ringke's screen bevel is high in the corners and upper third, but most of it is low and worrisome. Maybe it's better for gestures and selecting text at the edges of the screen, but it was too low for my tastes. [The Torras had the most protective feeling bevel, only a tiny bit better than the Spigen, I'd be fine with either. ] The Ringke's camera bump is it's best feature. It has the highest bevel, no visible gaps for dust to get in, and the extra coverage makes the camera lens a smaller target for sharp things. [The two others' camera bumps have big air gaps around the camera that will collect dust and bigger debris. They also have lower camera bevels that are still high enough, but the Torras' has a worrisome dip in the middle.] The Ringke has a very thin backing with no protective air gap between it and the phone. It does have air gaps in the corner so that seems protective, but it has none on the sides of the phone either. This and the low screen bevel are why it lost a star. [The Spigen has a thin backing as well, but both it and the Torras have good protective air gaps on the back/sides/corners, and the Spigen fills some of them with softer material. The Torras has the thickest firmest backing.] All have a nice feel in hand and are grippy enough. The Ringle and the Spigen feel very similar and are quite grippy. [The Torras uses a softer smoother feeling rubber for the sides that is fine, but feels slightly less grippy.] All the magsafe magnets were very strong. The Ringke's was very slightly weaker, but still had no problem on bumpy roads or from me bumping it. The Ringke and Spigen have a matte and bumpy finish that helps prevent the grimy look of oily fingerprints. The Ringke and the Torras have the most space for stickers. [The Torras collects way more visible oily smudges.] All the buttons are easy to press, but the Ringke and Spigen have gaps on the side that could let dust in. [The Torras has colorful replaceable buttons, and almost no gaps for dust to get in.] All were easy to install the phone into, but felt secure enough that it wouldn't come out on its own. An ideal case would have the build of the Torras, but the material of the Spigen and the camera protection of the Ringke. The Ringke and Torras were similar prices, but the Spigen was much cheaper at the time so I kept that one.

I spent a lot of time researching cases for my new Pixel 10 Pro, and my biggest hang-up on most was the poor lens bar fit. Almost all other cases have a slight gap around the lens bar which will allow dirt, dust, grime to build up around the lens bar and inside the case. This case, with how it overlaps the lens bar, not only ensures a gapless fit, it provides even better lens protection as well. On top of that, this case has the most premium, high quality feel of any case I have ever used before. I have used Spigen, Torras, kwmobile, and 1 or 2 others, but this case with its dotted side grips, bezeled edges, stone-like textured back, and tough yet lightweight TPU material feels incredible. The raised lip around the screen at the top and bottom of the phone are great for screen protection, while the recessed lips along the sides allow for easier side swiping which I use as "back" navigation feature on the Pixel. I do not have any issue with swiping up from the bottom either to unlock the phone or access all the apps due to the raised lip either. I put a ohSnap magnetic finger holder on and its right about the same thickness of the lens bar so there is still no wobbling when laid on its back, and it stay attached without issue, even when pulling it off a strong magnetic car mount. I expect to have this case all 3-years I will use this phone and unless it fails me sometime in these 3 years, I expect I'll get this same brand for my next phone too if its similar quality!

I ordered a case from Spigen, JETech, SpiderCase, Torras, and Ringke for my new Google Pixel 10 Pro... all of the cases seemed relatively high quality and fit the phone fine. However, the Ringke feels the best in your hand and has the most detailed design. I really like the raised lip around the top and bottom of the screen to enhance drop protection while leaving the sides more flush with the screen so that the case doesn't interfere with your finger movement during phone use. It was also the only case that had perfect alignment on all of the cutouts for speakers and plugs. The Rinke case has a great quality feel and provides great grip. It also feels very minimal (in a good way) and isn't bulky.

This case fits perfectly and it's extremely thin while still seeming to have decent protection. The material has sufficient grip and and seems durable. I got the green color and it's a pleasant and calming forest green. The buttons and cut outs are all clean and in the correct position. Something I didn't even notice but I like that there's are two volume buttons on the case despite the single button on the phone which makes it easier to hit up/down. Three magnetic feature seems to work great with all the stands/chargers that I have. Overall I'm very happy with this case. Part of me wishes it had just a bit more character but if you prefer your phone to not stand out, this is a great case.

The case is pretty nice, however I mainly got it because it said it had a powerful magnet. The magnet is so weak it does not attach to my phone mount in the car. It hardly even registers that there is a magnet there at all. I will be returning this

I really like this sturdy but slim case. It fits my Pixel 10 Pro perfectly; it sort of feels like my phone is inside a tank and is extremely well-protected. I especially like the camera cover part of the design - it guarantees the lens (or the lens protector if you have one) stays clean and doesn't come into contact with surfaces when set facedown, which can happen with some cases that only have a raised bevel around the camera edge. I haven't dropped it yet, so the actual protection hasn't been field-tested, but it sure feels up to the task. The texture is fine; a reliable no-slip grip. My only complaint is that the edges of the charging port opening are a little sharp on my pinky when I'm holding it in one hand for a while, but that issue seems rather common among cases.

se adapto perfecto al Google pixel 10 pro, ya había comprado una similar para el pixel 9 y son de la mejor calidad

J’ai testé la coque Ringke compatible avec le Google Pixel 9, et franchement, c’est un excellent choix si tu veux allier protection fiable et look soigné. La coque est bien finie, les matériaux sont de qualité et elle s’ajuste parfaitement au téléphone — pas de jeu, rien qui bouge. Le design est sobre mais moderne, tout en laissant visible la beauté du Pixel 9. Les boutons restent réactifs et faciles à presser, et les découpes sont parfaitement alignées avec les ports et les capteurs. La protection contre les chutes et rayures est vraiment rassurante, surtout au quotidien. Si tu veux une coque robuste, esthétique et efficace pour ton Pixel 9, la Ringke est un très bon choix à petit prix — je recommande sans hésiter!

This case is so so much nicer than the thick cheap one I was rocking for a year and a half. It makes it feel like I don't even have a case on the phone in comparison, but the protection via smart design choices is real. Love all the grippy stuff they added, and the back texture, for me, is awesome. I got the forest green and it looks fantastic. Would recommend.

I purchased a Pixel 10 Pro about a month ago and went all in on Ringke products to protect my phone. I purchased this case, their screen protector, and the camera lens protector. At the time of writing, I've been using the Magnetic Ringke Onyx for just over a month. Size: The case fits my Pixel 10 Pro like a glove. Every corner and edge (including the camera bump) feels flush. Ease of use: The sides are soft but not too soft, meaning it's easy to put on or take off when needed, but not too malleable that I'd worry it may come off unintentionally. Magnets: I got the magnetic variant, which means the case has an array of magnets compatible with MagSafe/PixelSnap accessories and Qi2 wireless chargers. I've not noticed any charging performance loss while wireless charging with the case compared to without the case, but the phone will naturally retain a bit more heat while wireless charging as it'll be harder to dissipate the heat generated while charging with a case on. This is by no means a deal-breaker as the only way to avoid this is to make the case made out of metal. The magnetic strength seems to be on par with the careless Pixel 10 Pro (which has quite a strong magnetic pull). Physically attributes: The top, bottom, and corners are all raised, while the sides have a lower, flat edge, which makes it really easy to do gestures such as the back action. The sides have textured dots which serve to both provide grip and textile feedback when holding the phone. There are holes for lanyards on either side of the case. I've not used them so cannot attest to their durability. Unlike most cases for Pixel phones, this one actually covers the metal part of the camera bump, which provides that extra bit of protection. The back is textured; when the case was new, the bumps felt quite prominent. However, after a month, the texture is more like that of faux leather. Not quite the same, but similar. The only gripe I have with the case is that the volume and power buttons don't have any texture. While this is very aesthetic, it means it's hard to distinguish between them without looking at the device. In conclusion, the quality of the materials seems good, and the fit is spot on. I'm quite content with my purchase and would recommend Ringke cases to friends in the future as they are quite good value for money due to being both cheaper and better than a lot of known brands.

Zeer prettige case doordat de 2 zijkanten 1,5 mm naar binnen vallen èn van een pixel profiel zijn voorzien heb je een uitstekende grip! De knoppen werken ook prima en de magneet sterkte is ook top. De bumper randen aan top en bodem zijn 2 mm hoog voor perfecte bescherming van touchscreen.