COMeap PCIe Cable for Corsair, ATX CPU 8 Pin Male to Dual PCIe 8 Pin (6+2) Male Power Cable for Corsair Thermaltake ARESGAME Power Supply 25-inch(63cm)

This PCIe cable is rock solid! It delivers consistent, high power without any issues—no overheating, no melting, just reliable performance. I’ve seen similar cables from other brands fail under heavy loads, but this one holds up like a champ. I have 4 RTX 3060s and splitter PCIE cables, those all melted, tried another brand consistent with power supply manufacturer and still melted. This cable, 4 months still going ! Value is great. Better this than a cord that will end up frying your beloved GPU. The build quality is exceptional, with thick, durable wiring and secure connectors that ensure a stable connection. If you need a dependable PCIe cable for your high-powered setup, this is the one to get.

This works perfect. I have a cx 550 corsair power supply using it to power a 2080 super. The pin out on the psu plug side is perfectly fine. There is a corner pin that has no wiring to it and it’s not a manufacturer defect. That pin is not used so it doesn’t matter.

Finally gpu power wires that work with my psu and 3090. Cooler master 850 is my psu

Some people have expressed disgust at this not being wired properly, including some frustration myself to the point i returned one order of them that was on its way tomorrow to my house. Until you figure out if you just switch which side you use for the 8 pin and 6 pin connectors The plug the furthest away goes into the left power slot on a video card, and other one goes to the right power plug in both 8+8 or 8+6 configurations. I was wigged out because also the part the plugs into the power supply, only has 7 wires into the "8 pin" form factor vs the 8 wires from the EVGA factory pci e wires. Apparently doesn't matter. GREAT cord for the price.

I did a modified Pixlas mod on my Mac Pro 5,1. Instead of using the power taps, I soldered pigtails onto the PSU wires as they entered the large plastic connector. I then used wire nuts to attach the GPU cable to the pigtails. I would have preferred a cable with individual wires covered with a shield over the ribbon cable, but it did work. Length was adequate too.

I have a Sentey 750 bronze power supply I bought several years ago, and at the time I did not need cables to power a GPU. I recently upgraded most of the components, and was adding a used graphics card, but the power cables I got with the card did not fit my power supply. The pin configuration at the PSU was different. I spent a while looking at various options, and could not find one that specifically mentioned Sentey, but the power-side pin configuration looked right, so I ordered this one. It fir my power supply fine, though the ends are not labeled "power supply" or "GPU", so you have to figure that part out for yourself. I like the white cable, as it clearly distinguishes my graphics power from the rest of the black power cables in the case.

If you need an extra PCI-E/VGA dual headed cable for your modular supply, this is a decent-quality one that fits Corsair Type 3 or 4 supplies, several (but not all) Thermaltake supplies, plus a few others; see the listing for details. (I can also say from personal experience that it will work in Seasonic supplies if you cut off the empty pin housing on the plug that goes into the power supply. You do this at your own risk.) This cable does NOT work in several other power supply brands, such as EVGA, SIlverstone, NZXT and others. The vendor has a different part# for those. Be careful! This cable seems to be well made and it is even a bit longer than the standard Corsair cable. Since this cable is the standard 18 AWG wire size, I would not use it for really high-powered video cards that draw more than about 175 watts. I also would not use it power 2 video cards unless they were low power, like gtx1650 or less. I am using these to run gtx1070 cards, one per cable, in a mining rig, with no problems. I will probably buy more of these in the future.

I misplaced the original PCIe cable that came with my Corsair CX450M power supply. I recently upgraded my monitor, so had to buy a new video card as my onboard graphics card would not support the resolution needed. I could not find a suitable cable anywhere local. Ordered this cable, it arrived quickly and plugged right in. Looks just like the factory Corsair cables. Works perfectly and there's connectors for 2 cards if that's what you need. Excellent product!

Buono

Kable działa bezbłędnie z kartą graficzną RTX 2070 Super i z zasilaczem MSI MPG series wyprodukowanym przez Channel Well Technology / CWT.

Funcionó con una Corsair 1050 y la tarjeta de video 3080.

worked with my MSI MAG A1250GL

Passt auch für 850 Watt Gigabyte P850GM ATX 2.31; (GP-P850GM) - Bei mir jedenfalls und läuft ohne Probleme (auch bei mir)