🎵 Elevate your vinyl game with precision!
The Pahmer Q Up Automatic Tone Arm Lifter is a precision device designed to safely lift your tonearm at the end of a record, ensuring high accuracy without compromising sound quality. It features three stackable platforms for customizable height adjustments, making it ideal for turntables with thick platters.
G**A
Absolutely fantastic little device!
The media could not be loaded. Works brilliantly on our manual turntable. Bought a new system, and was sold a manual turntable as being the best for sound quality - but once home we were worried the stylus would get damaged sitting in the run off groove, esp if we forgot about it all night (and we do.) So one smart plug and the Q Up later and our investment is protected! We tell Alexa to turn the plug off in an hour/at a certain time, and use the Q Up to lift the arm when the record finishes playing. It was a little bit fiddly to install, took a few adjustments, and a ruler to ‘mark the spot’ but it was soon secured in place. Additionally, not having any electrical components it doesn’t affect the sound quality at all. Happy days ☺️☺️☺️
D**3
A Up fitted to Audio-Technica LP5-X
The media could not be loaded. Arrived a day early and was well packaged. Very simple to fit and once sensitively and lift weight adjusted, seems to work very well. Only 4 stars as it feels a little cheap and I’m not keen on the white lift pad.
T**D
Just what I needed
If like me you were sick of getting up every 15-20 minutes to lift the needle off your vinyl then this is a must, no longer do I have the sudden "oh crap" moment as you leap off the sofa to grab the needle as soon as the last song plays.I was able to pick mine up for £20 which when you weigh up the pros vs cons is worth it but I've seen it now at £50 from some sellers, it is NOT worth that much due to it's build quality. Don't get me wrong it's not flimsy but at the end of the day it's a piece of light plastic with some sticky tape on the bottom!ProsWorks as it shouldGives me a more relaxing listenAdjustable heightAdjustable tone arm lift strengthConsExpensive for what you getDoes need some tinkering (YouTube videos)No instructions (go to company site)
N**5
It works
Looked at a few of these on u tubeBefore going for Q Up Quite easy to fit watch on u tubeWould recommendWorks well.
N**N
Doesn't work as it's far too tall
I'm afraid this doesn't work at all with a very common turntable (Pro-Ject Primary E) it's far too tall for the turnarm so a complete waste of money. It has plenty with it to make it even taller but nothing to make it shorter. Don't waste your money.
S**.
It works but feels cheap
It does its job. But it is actually to tall for my project debut carbon so instead i had to use my own adhesive to stick to the turntable instead of using the slide in stand that came with it.
D**S
Give your turntable a lift!
This is a simply brilliant product that basically turns your manual deck into a semi-automatic, meaning that the tone arm will lift at the end of the record. This gets rid of “inner groove anxiety” - ie when you are waiting for the end of the record, anticipating having to dash over to the ‘table to lift the stylus off the groove. Or you can safely fall asleep, knowing that your precious needle is not wearing itself out bumping around the lead-out groove!It takes a bit of fiddling to set up, but once done all you have to remember is to reset the device each time you change the record. This is also an absolute bargain, as much more expensive options such as the Little Fwend do basically the same thing. This is the best turntable accessory I’ve ever bought - highly recommended.
D**.
Did not fit Linn Basik, too tall
I can't give this a proper review because, even on it's lowest setting, it didn't fit under the tonearm on my Linn Basik. On examining the Q-Up, it seems a cheap, flimsy and "plasticky" product. I paid £27 for mine, which I thought overpriced for what it actually is. I've seen it advertised for a lot more! As I said, I can't say how well it works, as it didn't fit my turntable.
A**R
Must have for vinyl lovers
Went from a semi automatic turntable to Pro-Ject Debut Carbon that didn’t have tone arm return. Be patient setting it up. Works perfectly. Great addition to save your stylus and vinyl collection. Recommend to all my vinyl collecting friends
M**R
Super sprytne urządzenie!
Działa bez zarzutu, spore możliwości regulacji oraz dostosowania do gramofonu.
H**.
Funzt perfekt!!
The media could not be loaded. Funzt perfekt auf meinem alten Projekt 6,nun braucht man nicht mehr sofort zum Dreher hechten...Für meinen Zet 1 wäre mir diese Löung allerdings zu einfach,da ja der Qup ja nur ein Platikteilchen ist...Wenn es allerdings so funktioniert wie bei dem Project, lohnt sich die Anschaffung auf jeden Fall und ist mit wenigen Handgriffen sofort einsatzbereit.Knapp 40€ ist zwar schon eine Ansage, aber man hat so natürlich auch sofort seinen NutzenDurch die schlanke Ausführung fällt der Qup auf den ersten Blick auch gar nicht auf,was ich als Vorteil ansehe...Von da her eine dicke Empfehlung wenn einen den Preis nicht abschreckt...aber was ist im HiFi Bereich heute noch günstig??
C**N
molto bene
l'avevo preso per un debut II e ha funzionato molto bene tanto che l'ho passato su di un debut pro.La regolazione impegna per non più di 5 minuti, specialmente se si può montare la sua basetta, diversamente bisogna spendere qualche minuto in più: Lo consiglio assolutamente a chi ha un full manual
M**
For the lazy ones
Well, I'm lazy and this made me lazier, in a good way. No issues but don't forget to lift the arm lever before you you turn the arm back, otherwise the arm will fall down and possibly break the stylus.
Trustpilot
2 months ago
2 months ago